» AT8060 « » AT8060 « 10G ® ® Dual (up to) 8-Core Intel Xeon Processor E5-2600 Family » New 32nm multi-core Intel Xeon processor with high bandwidth, low latency, bi-directional ring interconnect for faster access to 20MB multi-banked last level cache; Hyperthreading (32 threads total) » Dual 8GT/s QPI interfaces between processors for lowest PCIe/memory latency » Total of 128GB Memory (Up to 64GB via 4 independent DDR3 channels per CPU) » Kontron Active Power Management via Power Node manager » 1 X AMC bay with PCIe x8 Gen2 + SATA connectivity » Rear Transition Module RTM8063 with 2 hot swap 2.5’’ SAS/SATA hard drives If it’s embedded, it’s Kontron. AT8060 AT8060 AdvancedTCA Multicore Processor Blade + RTM Increased Performance, Virtualization, Power Management This is a sixth-generation Intel processor-based ATCA a software interface for clients to intelligently pre-set and processor blade from Kontron and accommodates an AMC regulate the processor power settings on its AdvancedTCA® slot in conjunction with a dual socket, 8-core per processor processor blade via the Intel® Node Manager embedded in the approach. This enables further customization by populating Intel® Xeon® processor E5-2600 family. the blade with other specialized AMCs including packet processing and storage modules. Kontron has developed Active Power Management, a software interface for clients to intelligently pre-set and regulate the The selection of the Intel® E5-2600 processor family will processor power settings on its AdvancedTCA® processor prove to be the best combination of performance, power blade via the Intel® Node Manager embedded in the efficiency and cost for numerous virtualization-optimized Intel® Xeon® processor E5-2600 family. The Active Power and high bandwidth network applications designed by Management fully integrates existing Kontron Management Telecom equipment manufacturers (TEMs) for 4G LTE, IPTV/ Solutions and is accessible using known standards such content delivery and carrier cloud computing networks. as IPMI and PICMG® interfaces. It allows dynamic power monitoring, power capping controls, and power threshold Telecom, network and broadcast equipment vendors alerting, thus enabling platforms to achieve maximum seeking new high performance system level designs will performance and power for a single node. appreciate the boost in dual-socket, 8-core processing power complemented by new value-added, intelligent features. For supplemnetary storage, Kontron also introduces the RTM8063, a rear transition module built with 2 hot swap 2.5’’ This includes the new Kontron Active Power Management, SAS/SATA hard drives Technical Information Processor Dual (up to) 8-Core Intel® Xeon® Processor E5-2600 Family; Passive heatsink Virtualization Technology supported; Intel TurboBoost Data Direct I/O Technology (Intel® DDIO) to reduce memory accesses from I/O on local socket and speed up processor data transfers. Security features include Execute Disable (XD) and Intel® Trusted Execution Technology (Intel® TXT) for malware resistance, and Intel® AES New Instructions for data and asset protection. Cache Memory High bandwidth, low latency, bi-directional ring interconnect allows faster access to 20MB multi-banked last level cache Chipset Intel® C600 Chipset Bus interface Dual up to 8.0GT/s QPI interfaces between both processors for lowest PCIe and memory latency Expansion slots 1 Mid-size AdvancedMC bay with PCIe x8 Gen2 + SATA connectivity System Memory Total of 128 GB Memory, 4DIMMS per processor (Up to 64 GB across 4 independent DDR3 channels per processor) Dual eUSB flash drive supported are 16GB or more capacity Flash Memory Automatic BIOS settings content backup in flash memory 128kByte flash memory is connected to Intel Dual 10GB controller to store the iSCSI boot firmware Storage Dual Hot-Swap SAS HDD via Rear Transition Module, RTM8063 Support for SATA GEN1 (1.5Gb/s), and GEN2 (3Gb/s) on the AMC storage interface I/O Front Panel: Two SFP connectors to SerDes Ethernet interfaces of Quad port Ethernet controller, Serial (RJ-45) for RS-232 serial interface, 2 USB Base Interface: Two 10/100/1000Base-T interfaces are provided by the 82576 controller Fabric Interface: Both 82599 interfaces are configurable as 10Gb XAUI (10GBase-KX4) or 1Gbase-KX. All 4 ports are used in each channel to provide PICMG3.1 type 9 connectivity. Reliability Targeted MTBF is 250000 @ 30°C, calculations based on Telcordia SR-332 Safety: meets all requirements of UL/CSA/EN/IEC 60950-1 Safety / EMC EMC: compliant with the Electromagnetic Compatibility Directive, EC Council Directive 2004/108/EC Board Specifications PICMG3.0 R3.0; PICMG 3.1 R1.0 specification options 1 and 9 AMC.0 R2.0 specification; AMC.1 R2.0 specification type 1, 2, 4, or 8; AMC.3; HPM.1 Target Certifications Designed for NEBS Level 3 Regular PICMG3.0 Managed FRU/Hot Swap Dual SAS/SATA Hard Disk; 2x USB, 2x SFP, Serial RJ-45; and RTM (RTM8063) external SAS connector 2 www.kontron.com AT8060 Technical Information BIOS UEFI BIOS from AMI (UEFI Aptio4) with Compatibility Support Module (CSM), providing legacy BIOS compatibility Save AMI Setup configuration in non-volatile memory option Boot from Ethernet PXE (Base and Fabric interfaces and management Lan) Boot from Ethernet iSCSI (Fabric interfaces) Boot from SAS; and boot from USB 2.0 (Floppy, CD-ROM, Hard Disk) Diskless, Keyboard less, and battery less operation extensions Robust BIOS flash Update with rollover capability (HPM.1); Fail safe field updateable BIOS Advanced Configuration and Power Interface (ACPI 1.0, 2.0, 3.0, 4.0) Console redirection to serial port (VT100) with CMOS setup access, and SOL (Serial over LAN) Event (correctable/uncorrectable ECC, POST errors, PCI Express Error to IPMC); log support to IPMC Red Hat Enterprise Linux Server version 5.8 64-bit; Red Hat Enterprise Linux Server 6.1 64-bit; Wind River CGL 4.3 OS Compatibility Management Controller compliant IPMI v2.0 IPMI Features Remote control capability (power on-off /graceful shutdown/cold reset) via any IPMI channels including LAN when the payload power is off Full speed 115200 bps Serial Over LAN (+LAN access to BIOS menu setup) and IPMI Over LAN (IPMI v2.0) always available. Serial data caching and replay to ease software application troubleshooting and post mortem analysis BIOS Post Code error sent to shelf manager System Event Logging Configurable automatic “graceful ACPI shutdown” policy on disk storage deactivation (AMC or RTM) Full standard PCIe Hot Plug operation embedded with PICMG AMC/RTM activation Robust HPM.1 for IPMC/BIOS/FPGA update with rollover capability; IPMC is without any payload impact (HPM.1) Override configuration for activation of the board/AMC/RTM without Shelf Manager Intervention Manageability features via Embedded Web Server (such as remote control, System Event Log viewer, firmware upgrade) Supports a system management interface (KCS interrupt driven) via an IPMI V2.0 compliant controller Supervisory Standard IPMI Watchdog for all CPU running phase (BIOS execution / OS loading and running) IPMI Hardware system monitor (power/voltages), memory and all critical components' temperature are monitored Extensive sensors monitoring (around 100 IPMI sensors) and event generation base on thresholds and discrete reading Warranty Two years limited warranty Board power consumption is less than 315W; no RTM & no AMC. Power Policies can be used to control power requirements. Power Requirements * The power consumption will vary depending on your product configuration (AMC, RTM & extra memory) Environmental Operating Storage and Transit -5 °C to +55 °C / 23 to 131°F -40 °C to +85 °C / -10 to 185°F Temperature* Humidity* 5% to 93% @40°C / 104°F 5% to 93% @40°C / 104°F non-condensing non-condensing Altitude* -300 m to 4000 m / -984ft to 13,123 ft -300 m to 14 000m / -9,84 ft to 45,931 ft 11 ms half sine, 3 g, 3 shocks in each direction 6 ms half sine, 18 g, 100 shocks in each direction Shock* Vibration* 5 Hz to 10 Hz @ +12 dB/oct (slope up) 5 to 200 Hz 0.2 g 10 Hz to 50 Hz @ 0.02 m2/s3 (0.0002 g2/ Hz) (flat) 50 Hz to 100 Hz @ -12 dB/oct (slope down) * Designed to meet or exceed. CORPORATE OFFICES Europe, Middle East & Africa North America Asia Pacific Oskar-von-Miller-Str. 1 14118 Stowe Drive 17 Building,Block #1,ABP. 85386 Eching/Munich Poway, CA 92064-7147 188 Southern West 4th Ring Road Germany USA Beijing 100070, P.R.China Tel.: +49 (0)8165/ 77 777 Tel.: +1 888 294 4558 Tel.: + 86 10 63751188 Fax: +49 (0)8165/ 77 279 Fax: +1 858 677 0898 Fax: + 86 10 83682438 info@kontron.com info@us.kontron.com info@kontron.cn 3 www.kontron.com #AT8060# 03062012pkm All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibilty is assumed for inaccurancies. All brand or product names are trademarks or registered trademarks of their respective owners.