» » A AM M4 45 53 3x x « « Features » Cost-competitive NAS storage solution for MicroTCA and ATCA platforms » AM4530 and AM4531 available with multiple SATA/HDD capacity options » Base or/and Fabric access via VLAN » AMC.0, AMC.1, AMC.2 and AMC.3 compliant » IPMC, Dual IPMB, IPMI v2.0 If it’s embedded, it ’s Kontron. AM453x Kontron AM453x NAS AMC Module Unique in the market, the Kontron AM453x AMC module is a configuration for increased storage reliability, and are cost-competitive storage solution for MicroTCA and ATCA accessible by all blades and AMCs in the system via the base platforms that require Network Attached Storage connectivity. and/or fabric interface. Specifically for MicroTCA-based systems, the AM453x module In terms of media, the AM453x supports both Hard Disk Drives provides storage access for Processor AMC modules that are and Solid State Drives using the 2.5” form factor and SATA without a SATA connection, such as the AM4100 PPC AMC for interconnect. Basic NFS NAS is available via port 0 and 1 in the control plane applications or the AM42xx Cavium OCTEON Plus Common Option Region (Base Interface or Control Plane) and/ AMC for data plane applications. or port 8 and 9 in the FAT Pipes Region (Fabric Interface or Data Plane) with VLAN support provided in all flavors. From an ATCA platform standpoint, the AM453x can be a single point of code storage for the entire system when populated in Included into the module design are extensive sensors for one or both AMC slots of the Kontron AT89xx switch. This makes monitoring and event generation on thresholds, and there are it an ideal solution for fast boot code or application code two redundant Boot Block Flash BIOS and IPMI firmware with updates. Two AM453x modules can be set up in a redundant rollover. Technical Information Hard Disk Features AM4530 and AM4531 available with multiple SATA/HDD capacity options Processor Marvell 88F6281, 1.2 Ghz ARMv5TE-compliant with a 256KB L2 Cache Memory 512 MB DDR2-800MHz NFS support File Systems PXE Boot for x86 processors at release date DHCP or Static IP address Compliance PICMG AMC.0 R2.0, AMC.1 R2.0, AMC.2 R1.0 & AMC.3 R1.0 IPMI Features Management Controller compliant to PICMG 3.0, AMC.0 and IPMI v1.5 rev 1.1. Management Controller is run time field reprogrammable without payload impact. Robust fail safe reprogrammation implementation (which includes two firmware images) that could perform automatic or manual rollback if a problem occurs during critical reprogramation phase. Remote upgrade capability from all IPMI interfaces (via IPMB) Supervisory Hardware system monitor through IPMI (voltage, currents, temperature), temperature monitor / alarm; board temperature sensor, power failure. 181.5 x 75 x 30.16 mm, single-width full-size; 181.5 x 75 x 18.96 mm, single-width mid-size; Weight: 350 g Mechanical Power Requirements Management power is less than 100mA peak at 3.3V Payload power is 6W without hard drive Environmental Temperature* Operating: 0-55°C/32-131°F HDD, 0-70°C/32-158°F SSD version; Storage and Transit: -40 to +70°C/-40 to 158°F Environmental Humidity* Operating: 15% to 90% @55°C/131°F non-condensing; Storage&Transit: 5% to 95% @ 40°C/104°F non-condensing Operating: 4,000 m / 13,123 ft; Storage and Transit: 15,000 m / 49,212 ft Environmental Altitude* Environmental Shock* Operating: 30G, half-sine 11ms, each axis; Storage and Transit: Bellcore GR-63-CORE Section 4.3 Environmental Vibration* Operating: 1.0G, 5-500Hz each axis; Storage and Transit: 0.5G, 5-50Hz; 3.0G, 50-500Hz each axis Safety / EMC Meet or exceed: Safety: UL 60950-1; CSA C22.2 No 60950-1-03; EN 60950-1:2001; IEC60950-1 EMI/EMC: FCC 47 CFR Part 15, Class B; CE Mark to EN55022/EN55024/EN300386 Warranty Two years limited warranty * Designed to meet or exceed CORPORATE OFFICES Europe, Middle East & Africa North America Asia Pacific Oskar-von-Miller-Str. 1 14118 Stowe Drive 17 Building,Block #1,ABP. 85386 Eching/Munich Poway, CA 92064-7147 188 Southern West 4th Ring Road Germany USA Beijing 100070, P.R.China Tel.: +49 (0)8165/ 77 777 Tel.: +1 888 294 4558 Tel.: + 86 10 63751188 Fax: +49 (0)8165/ 77 219 Fax: +1 858 677 0898 Fax: + 86 10 83682438 info@kontron.com info@us.kontron.com info@kontron.cn 2 www.kontron.com #AM4530# 201102PCT All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibilty is assumed for inaccurancies. All brand or product names are trademarks or registered trademarks of their respective owners.