 AM4011 Processor AMC Module based on Intel® Core™2 Duo Ultra Performance  Intel Core 2 Duo with 1.5 GHz ® ™  Ultra Capacity Up to 4 GB memory DDR2 400 MHz Up to 8 GB NAND Flash  Ultra Flexibility Flexible Gigabit and PCI Express fabric interface If it‘s Embedded, it‘s Kontron.  First class performance AMC module Kontron’s AdvancedMC processor module AM4011 provides outstanding performance in conjunction with compre- hensive AMC interconnect capabilities designed according to the PICMG specifications AMC.0, AMC.1, AMC.2, AMC.3.  Ultra Performance The AM4011 is a highly integrated CPU board implemented as a Single Mid-size or Full-size Advanced Mezza- nine Card (AMC) Module. The design is based on the Intel® Core™2 Duo processor in 65 nm technology with 64 kB L1 and 4 MB L2 cache in a 479 FCBGA package combined with the Intel® 3100 server-class chipset providing a front side bus (FSB) of 667 MHz.  Ultra Capacity The board includes up to 4 GB registered Double Data Rate (DDR2) memory with Error Checking and Correcting (ECC) running at 400 MHz. Two dual Gigabit Ethernet controllers each utilizing a x4 lane PCI Express inter- connection to the Intel® 3100 chipset ensure maximum data throughput between processor and memory. The AM4011 further provides up to 8 GB Flash memory via an USB 2.0 NAND Flash Controller.  Ultra Flexibility Supporting the PICMG sub-specifications AMC.1/.2/.3 the AM4011 ensures a comprehensive set of intercon- necting capabilities to the AMC Carrier. A x4 PCI Express lane according to AMC.1 guarantees high throughput for I/O intensive applications. The dual Gigabit Ethernet controller realizing the AMC.2 interconnect utilizes a x4 lane PCI Express interface to the 3100 chipset ensuring maximum packet performance. Two SATA ports compliant to AMC.3 allow flexible usage models of the AM4011 depending on the application requirements. The AM4011 offers comprehensive front panel connectivity by 2x GbE RJ45 ports, 1x USB port, an RS232 interface realized via a mini 10-pin connector.  AMC everywhere A comprehensive range of ’AMC everywhere’ ATCA boards, such as ATCA carrier boards, CPU and hub boards are complementing Kontron’s AMC product portfolio including the AM4011 module. Optimized for high-perfor- mance, packetbased telecom systems, the AM4011 is targeted towards, but not limited to telecom applications such as radio network controllers, storage control, routing and switching solutions in ATCA systems. Beyond the usage in ATCA systems the AM4011 complies to the MicroTCA standard dedicated for cost optimized com- munication applications.  Reliability The careful design and selection of high temperature resistant components together with the elaborated heat sink construction ensures a high product availability. This, along with a high level of scalability, reliability, and stability, makes this state-of-the-art product a perfect core technology for long-life embedded applications. Front Panel AMC Card-edge Con. Soldered DRAM up to 4 GB DDR2 w ECC RAM RAM RAM RAM RAM RAM RAM RAM RAM Cu PHY 1000BT GbE C Port No. RJ-45 Intel® Dual x4 PCIe Dual GbE Mag. 82571EB 1000BT GbE D Cu PHY RJ-45 400 MHz 72 bit USB 2.0 Mini USB USB A DDR2 USB PCIe B SERDES 0 Intel® Intel® ITP 667 MHz Com. Opt. Reg. Dual GbE PCIe A Core™2 Duo FSB x4 PCIe 82571EB Debug 1.5 GHz SERDES 1 Intel® 3100 chipset x4 PCIe PCIe A SMB 4 - 7 Fat Pipes Reg. Mini COM 1 RS-232 Con. SATA 1st 2nd LPC SATA BIOS BIOS EEP 2 - 3 Com. Opt. Reg. Debug FLASH FLASH 64 kbit Con. LPC COM USB 1 MB 1 MB Front Panel LEDs CMOS backup USB 2.0 LPC USB USB NAND Flash Con. COM1 and COM2 POST Code / FPGA COM2 COM2 15 Debug Board Control Debug Ext. Opt. Reg. Debug 14 Clk Clk TCLK Clock to all I²C Serial PCIe devices PCIe Clk Hot Swap FCLK LPC clock 2 2 I C I C Out-of-Service IPMB-L 2 MMC I C Health 2 I C 12V payload DC/DC Hot Swap Switch converters 3.3V management EEP EEP Temp. Temp. CPU and power 1 MB 64 kbit Sense Sense chipset temp. 2nd Boot Flash AM4011  Specification System Processor Intel® Core™2 Duo L7400 (LV), 1.5 GHz, 667 MHz FSB, 4 MB L2 cache The processor is passive cooled with a fanless heatsink. Forced air cooling at a specific flow rate is required. Memory System memory: Up to 4 GByte (soldered) registered DDR2 400 MHz with ECC NAND Flash: Up to 8 GByte NAND Flash via onboard USB 2.0 Flash controller Flash (BIOS): Two redundant 1 MB Firmware hubs (FWH) EPROM: Serial EEPROM (24LC64) 64 kbit Onboard Controller Intel® 3100 chipset with integrated Three x4 PCI Express ports, DDR2 SDRAM memory controller with ECC, six SATA 150 ports, four USB 2.0 ports, two UARTs, Memory and I/O Controller Hub: RTC, Interrupt Controller, Timer Gigabit Ethernet: Two Intel® 82571EB dual Gigabit Ethernet PCI Express bus controller Watchdog: FPGA based, software configurable, two-stage Watchdog with programmable timeout ranging from 125 msec to 256 sec in 12 steps. MMC: Microcontroller with on-chip 512 kB Flash and 40 kB RAM, ext. 1 MB SPI Flash, 64 kbit EEPROM AMC System Interconnect PCI Express: One x4 PCI Express interface AMC fat pipes region port 4-7 Gigabit Ethernet: 1x 1000BASE-BX (SerDes) on AMC ports 0-1 (Common Options Region) Serial ATA: 2x Serial ATA 150 ports on AMC ports 2-3 (Common Options Region) and 2x Serial ATA 150 ports on AMC ports 12-13 (Extended Options Region) Serial Interface: 1x Serial Port (COM2) on AMC port 15 (Extended Options Region) Front Panel One USB 2.0 port on a 5-pin, mini USB type A connector OneSerial port (COM1) with RS-232 signal level on a mini 10-pin connector Two Gigabit Ethernet ports on two RJ-45 connectors Three Module Management LEDs Four User-Specific LEDs MMC Module Management Controller Microcontroller with 40 kB RAM and redundant 512 kB Firmware Flash with automatic roll-back strategy. The MMC carries out IPMI commands such as monitoring several onboard temperature conditions, board voltages and the power supply status, and managing hot swap operations. The MMC is accessible via a local IPMB (IPMB-L) and two host Keyboard Style Interfaces (KCS). Compliancy ATCA: PICMG 3.0 AdvancedTCA Base Specification R2.0 MicroTCA: PICMG MTCA.0 Micro Telecommunications Comp. Architecture R1.0 AMC: PICMG AMC.0: Advanced Mezzanine Card Specification R2.0 PICMG AMC.1: PCI Express and Advanced Switching R1.0 PICMG AMC.2: Gigabit Ethernet R1.0 PICMG AMC.3: Storage Interfaces R1.0 IPMI: IPMI Intelligent Platform Management Interface Spec. V2.0 IPMI - Platform Management FRU Information Definition V1.0 PCI Express: PCI Express Base Specification Revision 1.0a Serial ATA: Serial ATA 2.5 Specification CE: EN55022, EN55024, EN61000-6-2/-6-3, EN300386, EN60950-1 Vibration/Shock: IEC60068-2-6 / IEC60068-2-27 Climatic Himidity: IEC60068-2-78 WEEE: Directive 2002/96/EC RoHS: Directive 2002/95/EC Power Consumption AM4011 with Core 2 Duo, 1.5 GHz, 2 GB max. 36 W General Dimensions: 181.5 mm x 73.5 mm x 18.96 mm (Mid-size/Single-width), 181.5 mm x 73.5 mm x 28.95 mm (Full-size/Single-width) MTBF: 223,951 h acc. Bellcore Issue 6, Ground Benign, Controlled, 30 C Software Support AMI BIOS, BIOS parameters saved in EEPROM, Boot order defined via MMC Serial over Lan, Support for Redhat Linux, WRLinux PNE 2.0 (Q3/2008), VxWorks 6.6 SMP (Q3/2008) Environmental Operating temp.: -5°C to +55°C (depending on system environment) Storage temp.: -40°C to +70°C Humidity: Operational: 5%-90% (non-condensing) Non-Operating: 5%-95% (non-condensing) www.kontron.com AM4011  Ordering Information Article Description Processor AMC AM4011-1.5GHz-2M-mid PrAMC, Intel® Core™2 Duo (LV), 1.5 GHz, 667 MHz FSB, 2 GB memory AM4011-1.5GHz-4M-mid PrAMC, Intel® Core™2 Duo (LV), 1.5 GHz, 667 MHz FSB, 4 GB memory Software LIN-BSP-AM4011 Generic Linux Board Support Package, Documentation Accessories FLASH-xxx NAND-Flash in various capacities  AM4011 Platforms  Corporate Offices Europe, Middle East & Africa North America Asia Pacific Kontron Modular Computers GmbH Oskar-von-Miller-Str. 1 14118 Stowe Drive 17 Building,Block #1,ABP. Sudetenstr. 7 85386 Eching/Munich Poway, CA 92064-7147 188 Southern West 4th Ring Road 87600 Kaufbeuren Germany USA Beijing 100070,P.R.China Germany Tel.: +49 (0)8165/ 77 777 Tel.: +1 888 294 4558 Tel.: + 86 10 63751188 Tel.: +49 (0)8341/ 803-0 Fax: +49 (0)8165/ 77 219 Fax: +1 858 677 0898 Fax: + 86 10 83682438 Fax: +49 (0)8341/ 803-499 sales@kontron.com sales@us.kontron.com kcn@kontron.cn sales@kontron.com www.kontron.com #AM4011#09052008PDL Copyright© 2008 Kontron AG. All rights reserved. All data is for information purposes only and not guaranteed for legal purposes. Information has been carefully checked and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Kontron and the Kontron logo and all other trademarks or registered trademarks are the property of their respective owners and are recognized. Specifications are subject to change without notice.