 chipDISK-IDE  IDE compatible Flash  No moving parts & lockable  Various sizes from small to huge MBytes!  Latest NAND flash technology www.kontron.com chipDISK-IDE  Product Overview The chipDISK is a fully IDE-compatible flash harddisk and was the complete compatibility with a „normal“ harddisk on one designed to replace the customary harddisk. The chipDISK is hand, and which conducts the organisation of the flash- ased upon FLASH-TECHNOLOGY and is absolutely insensitive to components on the other. Potential defects in the flash-cells tremors, vibrations, impacts, fluctuations in temperature and are automatically recognised and dealt with accordingly. magnetic fields. The chipDISK is therefore best suited for use Data protection is therefore considerably hightened. Data in mobile equipment and systems which need to withstand transfers up to PIO Mode 2 are supported. The chipDISK is severe influences. The minimal mechanical measurement allow designed to be directly plugged (without a cable) onto a 2 its employment in very compact pieces of equipment. The mm pin rail with the pin cover of a 2.5” IDE-hard disk. The power consumption of the chipDISK is only a fraction of that chipDISK-IDE can be directly employed on most Kontron needed by a “normal” harddisk which therefore considerably PC/104-CPU modules and Slot-CPU cards. lengthens its amount of potential operation time. A hard disk contoller is integrated in the chipDISK which insures With Kontron You stay...always a Jump ahead!  Technical Information   Weight: < 10g Fully IDE hardware - compatible flash disk which is directly pluggable on to a 2.5” IDE plug  Operating voltage: +5V ±5%  Needs no special installation or formatting software  Endurance: 100.000 erase / programm cycles per logical sector  Automatic error correction and retry  Power consumption: sleep mode: < 1 mA  Supports power down and start modem reading: < 80 mA writing: <100 mA  44 Pin 2mm IDE plug connection  Temperature: operation: 0 to 70° C  No moving parts storage: -40 to 85° C  Smallest IDE hard disk suitable for use in industry  Max. humidity: operation: 10% to 90% storage: 5% to 95% chipDISK bottom view  Ordering Information Article Part.-No. Description chipDISK/32-IDE 08001-0032-00-0 IDE compatible flash-harddisk with 32 MByte chipDISK/128-IDE 08001-0128-00-0 IDE compatible flash-harddisk with 128 MByte chipDISK/256-IDE 08001-0256-00-0 IDE compatible flash-harddisk with 256 MByte chipDISK/512-IDE 08001-0512-00-0 IDE compatible flash-harddisk with 512 MByte chipDISK/1000-IDE 08001-1000-00-0 IDE compatible flash-harddisk with 1 GByte  Corporate Offices Europe, Middle East & Africa North America Asia Pacific Kontron Embedded Modules Kontron AG Kontron America Corporate Office Kontron Asia Inc. Brunnwiesenstr. 16 Oskar-von-Miller-Str. 1 14118 Stowe Drive 4F, No. 415, Ti-Ding Blvd. 94469 Deggendorf 85386 Eching/Munich Poway, CA 92064-7147 Sec.2, NeiHu District Germany Germany USA Taipei Taiwan 114 Tel.: +49 (0)8165/ 77 777 Tel.: +1 888 294 4558 Tel.: +886-2-2799-2789 Tel.: +49 (0)991/ 370 24-100 Fax: +49 (0)8165/ 77 219 Fax: +1 858 677 0898 Fax: +886-2-2799-7399 Fax: +49 (0)991/ 370 24-333 sales@kontron-emea.com sales@us.kontron.com sales@kontron.com.tw sales-kem@kontron.com www.kontron.com/MOPS #chipDISK-IDE#07062006PDL All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibilty is assumed for ® ® inaccurancies. All brand or product names are trademarks or registered trademarks of their respective owners. DIMM-PC and JUMPtec are registered trademarks of Kontron Embedded Modules GmbH, Germany. Rev #ETXexpress-PM#300305 RoHS compliant logo means that product will be lead-free/RoHS compliant latest by June 30th, 2006.