Flash-Disk, full IDE compatible chip DISK-IDE Technical Data � Fully IDE hardware- compatible ţ ash disk which is directly pluggable on to a 2.5" IDE plug 52,5 mm (2.08”) � Needs no special installation 40,5 mm (1.6”) or formation software � Automatic defect correction � Automatic sleep mode � 44 Pin 2mm IDE plug connection � No mechanically mobilised parts � Smallest IDE hard disk suitable for use in industry � Weight: approx.20g � Operating voltage: +3,3V ± 5% or +5V 5% � Power consumption: sleep mode: < 1 mA reading: < 80 mA writing: <100 mA Description � Startup time: sleep to write: 2,5 ms max. The chipDISK is a fully IDE-compatible ţ ash harddisk with a "normal" harddisk on one hand, and which sleep to read: 2.0 ms max. reset to ready: 50 ms typ. 400 ms max. and was designed to replace the customary harddisk. conducts the organisation of the ţ ash-components The chipDISK is based upon FLASH-TECHNOLOGY and on the other. Potential defects in the ţ ash-cells are � MTBF at 25°C: is absolutely insensitive to tremors, vibrations, impacts, automatically recognised and dealt with accordingly. > 1.000.000 hours ţ uctuations in temperature and magnetic Ţ elds. The Data protection is therefore considerably hightened. A � Temperature: chipDISK is therefore best suited for use in mobile special writing procedure working in connection with operation: 0 to 60° C storage: -10 to 85° C equipment and systems which need to withstand severe the cache memory considerably increases the slow inţ uences. The minimal mechanical measurement allow writing speed that ţ ash-components are known to � Max. humidity: its employment in very compact pieces of equipment. have. The chipDISK is designed to be directly plugged operation: 10% to 90% storage: 5% to 95% The power consumption of the chipDISK is only a (without a cable) onto a 2 mm pin rail with the pin fraction of that needed by a "normal" harddisk which cover of a 2.5" IDE-hard disk. The chipDISK-IDE can ® therefore considerably lengthens its amount of poten- be directly employed on most JUMPtec PC/104-CPU tial operation time. A hard disk contoller is integrated in modules and Slot-CPU cards. the chipDISK which insures the complete compatibility Ordering Information Article Part.-No. Description chipDISK/32-IDE 08001-0032-00-0 IDE compatible ţ ash-harddisk with 32 MByte chipDISK/96-IDE 08001-0096-00-0 IDE compatible ţ ash-harddisk with 96 MByte chipDISK/256-IDE 08001-0256-00-0 IDE compatible ţ ash-harddisk with 256 MByte Accessories Article Part.-No. Description chipDISK-DOC 96035-0020-00-0 Manual for chipDISK chipDISK-ADA1 96004-0000-00-0 Adapter and cable for 2.54 mm (0.1”) connector Kontron Embedded Modules GmbH +++ Brunnwiesenstr. 16 +++ 94469 Deggendorf +++ Phone +49 (0) 991-37024-0 +++ Fax 37024-102 +++ www.kontron.com +++ 31 mm (1.22”) 13,5 mm (0.53”)