HONEYWELL SENSING & CONTROL SS561AT

Interactive Catalog Replaces Catalog Pages Honeywell Sensing and Control has replaced the PDF product catalog with the new Interactive Catalog. The Interactive Catalog is a power search tool that makes it easier to find product information. It includes more installation, application, and technical Click this icon to try the new information than ever before. Interactive Catalog. Sensing and Control Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Hall Effect Products Surface Mount Sensors SS5 Series FEATURES/BENEFITS • Wide temperature and voltage ranges for design flexibility and harsh (automotive)environments. • Temperature compensated for consistent operation with low-cost magnets (SS500). SS5 Series Hall effect position sensors are operated by the magnetic • SS5 Package is resistant to field from a permanent magnet or electromagnet. The small SOT89 style thermal and mechanical package surface mounts on PC boards and flexible circuits. The SS5 uses stress. a industry standard "gull-wing" design which makes it less susceptible to • SS5 profile is lower than "solder bridging" and allows increased circuit board density. The SS5 other SOT-89 packages. series package can accommodate larger IC’s than SS1 and allows for four- This allows the customer to pin designs reduce the total gap. The integrated circuits are designed to provide predictable performance • Industry standard "gull-wing" over the full temperature range of -40 to +150°C. Bipolar, unipolar and design. Less susceptibility to latching magnetics are available. The SS5 has the same footprint and pin- "solder bridging". Allows out as the industry standard SOT-89. It will replace Honeywell SS1 Series increased circuit board and any equivalent SOT-89 sensors from other suppliers with minimum or density. no design changes. • Bipolar, unipolar and latching On-board regulation provides extremely stable operation over the full magnetics. supply voltage range of 4.5 to 24 VDC(SS51T) or 3.8 to 30 VDC(SS500). • Low Gauss versions Current consumption is a low 10 mA maximum at 40°C and is typically available for high accuracy 7mA or less at room temperature and above. SS5 sensors are capable of or wide gap applications. continuous 20 mA sinking output, and can withstand temporary current as • SS5 package allows 4-pin high as 20 mA maximum (SS51T) or 50 mA maximum (SS500). They can package designs use existing power supply sources in most applications, and can be directly interfaced with many electronic components without buffering or TYPICAL APPLICATIONS compensation circuitry. • Brushless DC motors SS5 Series sensors are supplied on tape and reel for high-volume, • Digital current sensor automated pick and place equipment. Each reel contains 1,000 sensors. • Anti-skid braking sensor MICRO SWITCH supplies bar and ring magnets for operating Hall effect • Piston detection in hydraulic sensors. Bar magnets can operate any Hall effect sensor. Ring magnets cylinder are magnetized on the outside diameter with alternating North and South • Valve position sensing poles. They are particularly useful with bipolar sensors and rpm • Cam, lever, shaft position measurement. sensing • Tachometer, counter pickup • Push-button sensor • Disk speed, tape rotation, flow rate sensing • Speed sensing - rate, under, over speed • Remote reading sensor • Magnetic card reader HONEYWELL Sensing and Control Hall Effect Products SS5 Series Surface Mount Sensors WIRING DIAGRAMS ABSOLUTE MAXIMUM RATINGS Catalog Listing SS51T SS500 Supply Voltage -28 to +28 VDC -1 to +30 VDC Voltage externally +28 VDC max. (OFF +30 VDC max. (OFF applied to output condition only) condition only) -0.5 VDC min. (OFF or ON condition) Output ON Current 20 mA max. 50 mA max. Temperature Limits Operating -40 to +150°C (-40 to -50 to +160°C (-46 to +302°F) +320°F) Storage -40 to +150°C (-40 to -65 to +160°C (-54 to +302°F) +320°F Magnetic Flux No limit. Circuit cannot be No limit. Circuit cannot be damaged by magnetic damaged by magnetic overdrive. overdrive. Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. OPERATING CHARACTERISTICS SS51T SS500 Remarks Supply Voltage 4.5 to 24 VDC 3.8 to 30 VDC Current Consumption (Ioff) 10 mA 10 mA Max over temp Output Voltage (operated) 0.4 V 0.4 V Sinking 20 mA max. Output Current (operated) 20 mA 20mA 10 μA10μA Output Leakage Current Output Switching Time V = 12 V, CC 1.5 μs 1.5 μs Rise, 10 to 90% R = 1.6 K Ohm, L 1.5 μs 1.5 μs Fall, 90 to 10% C = 20 pF L Operating Temperature; °C -40 to +150°C -40 to +150°C 2 Honeywell • Sensing and Control For application help: call 1-800-537-6945 Hall Effect Products SS5 Series Surface Mount Sensors MAGNETIC CHARACTERISTICS Catalog Listing SS51T SS511AT SS513AT SS541AT SS543AT SS549AT SS561AT SS566AT Magnetic Type Bipolar Bipolar Bipolar Unipolar Unipolar Unipolar Latching Latching Magnetic Characteristics (Gauss) -40°C Max. Op. 145 70 140 135 215 440 110 200 Min. Rel. -145 -70 -140 20 80 210 -110 -200 Min. Dif. 40 15 20 15 25 30 50 200 0°C Max. Op. 145 65 140 117 190 400 90 185 Min. Rel. -145 -65 -140 20 80 230 -90 -185 Min. Dif. 50 15 20 18 25 30 50 200 25°C Max. Op. 140 60 140 115 180 390 85 180 Min. Rel. -140 -60 -140 20 75 235 -85 -180 Min. Dif. 50 15 20 20 25 30 50 200 85°C Max. Op. 150 60 140 120 180 400 85 180 Min. Rel. -150 -60 -140 15 70 215 -85 -180 Min. Dif. 50 12 20 15 15 30 50 190 125°C Max. Op. 200 65 140 123 190 410 100 180 Min. Rel. -200 -65 -140 15 60 200 -100 -180 Min. Dif. 60 12 20 8 10 30 50 160 150°C Max. Op. 250 70 140 125 200 420 110 185 Min. Rel. -250 -70 -140 10 55 185 -110 -185 Min. Dif. NS 10 20 5 5 30 50 140 OPERATE AND RELEASE POINTS SS51T SS511AT SS513AT SS541AT SS543AT SS549AT SS561AT SS566AT For application help: call 1-800-537-6945 Honeywell • Sensing and Control 3 Hall Effect Products SS5 Series Surface Mount Sensors WARRANTY/REMEDY MOUNTING DIMENSIONS Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. TAPE DIMENSIONS While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office. Or call: 1-800-537-6945 USA 1-800-737-3360 Canada REEL DIMENSIONS 1-815-235-6847 International FAX 1-815-235-6545 USA INTERNET www.honeywell.com/sensing info@micro.honeywell.com Sensing and Control Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 www.honeywell.com/sensing Printed with Soy Ink on 50% Recycled Paper 005841-1-EN IL50 GLO 599 Printed in USA