GE Intelligent Platforms P-10SF PMC Interface for 10 Mbps 1553 Features • Software Support RS-485 PHY Layer - Advanced, portable, high-level API • 1 o r 2 independent channels of 10 Mbps, 1553 May be used in drop bus or point-to-point - Source code Notice 2 protocol, using RS-485 transceivers data link applications as related to RS-485. ® - Driver support for Windows and • Single-function operation ® Vxworks (PPC) Single-function Interface - Bus Controller (BC) or single RT (sRT) or Bus Monitor (BM) Each P-10SF interface dual redundant chan- The P-10SF from GE Intelligent Platforms offers nel has all the features and functionality of • Bus Controller one or two channels of dual-redundant 10 GE Intelligent Platforms’ FlightCORE-1553-10 - BC->RT, RT->BC, RT->RT, mode codes Mbit 1553 Notice 2 protocol using RS-485 Intellectual Property core. A dual redundant and broadcast transceivers. This interface is an excel- channel can operate independently as either - Single-shot and major/minor frame lent choice for flight controls, actuators, a Bus Controller, single Remote Terminal or messaging electro-pneumatic controllers or for similar as a Bus Monitor. - 4-65k µsec programmable time delays applications of standard 1553, requiring higher data rates. The P-10SF is available as a native • Remote Terminal Software PMC interface or in PCI or CompactPCI formats - RT data wrapping With each interface, GE Intelligent Platforms - Multiple RT buffers (supplied on carriers). Each interface provides includes CORE-API, a portable, high-level API BC, single RT or BM functionality with a por- - Automatic Mode Code and Status Bit (Application Programming Interface) software responses table, high-level API (Application Programming library, as well as driver support for Windows - Programmable response times Interface) software that includes driver sup- - RT map monitoring XP, 2000, Me, NT, 98, 95 and the VxWorks (PPC) port for Windows and VxWorks (PPC) to reduce • Bus Monitor operating systems. application development time. - Word-based Board Configurations - Circular buffer Standard features include –20 V to 25 V - Message time tagging Common-Mode Voltage Range, Bus I/O Protec- Each P-10SF PMC interface may be obtained - Gap and RT response times tion to Over 16-kV HBM, Failsafe Receiver for in 1 or 2 dual-redundant channels on a Open-Circuit, Short-Circuit and Idle-Bus Con- • Architecture PCI and cPCI carrier with front bezel or ditions and >100 mV Receiver Hysteresis for - Dynamic link-list data structures P14 (rear) I/O and optionally in ruggedized, the RS-485 transceivers plus 48-bit message - 32KW DPRAM for one channel; 16KW extended operating or conduction cooled time-tagging, extensive BC and RT link-list each for dual channel temperature configurations. structures, error detection, advanced BC func- - BC, RT and BM 48 bit message time-tagging - BC, RT and BM full error detection/reporting tionality, automatic/manual RT Status Bit and Mode Code responses, along with Post, PBIT, - Drop-bus designed RS-485 transceivers with idle-bus conditions IBIT (Built-in Tests) and cable wrap testing. - Direct coupled stub connection - Environmental options P-10SF PMC Interface for 10 Mbps 1553 Remote Terminal Specifications Description • Single RT support Physical BC and RT Common Features • Hardware RT address lines supported • Single-wide PMC card (74mm x 149mm) • Link list data structure • Message legalization • Optional PCI, 3U and 6U compactPCI carriers • 48 bit message time stamp - RT/ T-R/ SA/ WC/ MC legalization • Full error detection - SA31 mode code selectable PCI Interface - Broadcast selection • Programmable IGT and RT response times • 33/66 MHz operation • Full message error reporting • Multiply message buffers • Universal keying (3.3 and 5 volt) • Mode code support • Start-up frames - All mode codes supported Single-function Operational Modes • Interrupts per message and error conditions - Mode code processing • BC or single RT or Bus Monitor Bus Controller - Reserved mode codes • Scheduling and "one-shot" operations On-board Dual Port RAM • Multiple RT structures • 1553 message types supported • 32 KWords for single dual redundant channel - Receive, transmit and mode code data buffers - BC->RT, RT->BC, RT->RT, - Broadcast data and RT control buffers • 16 KWords each for two dual redundant channels - Mode code, broadcast • RT wrap with settable return address Connections • Reporting • Point-to-point or multi-drop Bus Monitor - No-response report, late message, RT timeout • Capture word based bus traffic: 48 bit, 1 microsecond • Front panel bezel or P14 I/O connection - Invalid message notification Time-tagging error, word, and message status • Transition cabling optional - Full spectrum error indicator bits • Message buffer time tagging beginning of message, • Time tags, data and status words Environmental RT response and gap times • All valid data words and status words are stored • Commercial operating temp. range: 0°C to +70°C • Full error detection and reporting late, no, and early • Optional extended op. temp. range: -40°C to +85°C response invalid word and detailed error reporting • Optional conductively cooled configurations: (max. +71°C rail temp) Ordering Information Options P-10SF-1 • SCSI-3 68-pin transition cable for buses and I/O PMC card with one dual-redundant channel of 10 Mbit 1553 Notice 2 protocol, using RS-485 transceivers. • Stub termination optional Single-function operation (BC or sRT or BM). Front bezel I/O. Includes API, example programs and electronic • PCI or compactPCI carrier card integration documentation. Windows and VxWorks (PPC) support). Software Support P-10SF-2 • CORE-API - High-level libraries with source code. PMC card with two dual-redundant channels of 10 Mbit 1553 Notice 2 protocol, using RS-485 transceivers. Driver support included for Windows XP, 2000, Me, Single-function operation (BC or sRT or BM). Front bezel I/O. Includes API, example programs and electronic NT, 98, 95 and VxWorks (PPC). documentation. Windows and VxWorks (PPC) support). About GE Intelligent Platforms GE Intelligent Platforms, a General Electric Company (NYSE: GE), is an experienced high-performance technology company and a global provider of hardware, software, services, and expertise in automation and embedded computing. We offer a unique foundation of agile, advanced and ultra-reliable technology that provides customers a sustainable advantage in the industries they serve, including energy, water, consumer packaged goods, government and defense, and telecommunications. GE Intelligent Platforms is a worldwide company headquartered in Charlottesville, VA and is part of GE Home and Business Solutions. For more information, visit www.ge-ip.com. GE Intelligent Platforms Contact Information Americas: 1 800 433 2682 or 1 434 978 5100 Global regional phone numbers are listed by location on our web site at www.ge-ip.com/contact www.ge-ip.com ©2010 GE Intelligent Platforms, Inc. All rights reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 01.10 GFA-786A