����������������� ������ �������������������������� ����� �������� � Concurrent ARINC 708 Rx and Tx � Cross-Platform portability (PC/AT, PCI, VME, VXI, and CompactPCI) � Short and long frame error injection � Interrupt driven or polled operation � Large transmit and receive buffers � Mix 708 on the same board with integration into your system. Interrupt- The Condor Engineering IP-708 module other protocols (ARINC 429, driven (with programmable interrupt supports simultaneous receive and 561, 573, 717, etc.) vector), and polled operations are transmit of ARINC 708 data on a single- supported. There is a 64 Kbyte receive wide IP Module. � User programmable base and a 64 Kbyte transmit buffer. interrupt vector Interrupts can be generated upon ARINC 708 support is available on a � C utility routines in source code transmit completion of 64 frames, and wide range of popular hardware after 256 frames have been received. platforms including VME, VXI, PC/AT, PCI Error detection/notification of both short and CompactPCI. The Condor and long received frames is provided. Engineering IP-708 provides an easy-to- Short Frame and Long Frame error use software interface, large data injection are supported. buffers and an onboard protocol engine to reduce host intervention. Each module has 1 Rx channel and 1 Tx channel. Up to three IP-708 modules Our high-level software API (Application are supported in a single slot. IP Programming Interface), is included with Modules are industry standard I/O support for Windows XP , 2000, Me, NT, mezzanine cards that mount onto host 98 and 95 on specified platforms. The carrier boards enabling cross-platform IP-708 is also supplied with a high-level portability. API in C source code to facilitate ��������������������������� �������������� �������� ■ 1 Rx, 1 Tx ■ 64 Kbyte (over 300 frames) �������������� ��������������� ■ 64 bits control ■ 64 Kbyte (over 300 frames) ■ 1536 bits data ��������� ■ 1600 total ■ 1 MHz ����� ������������� ■ +5 VDC: 750 mA See our on-line Commercial Products ■ Operating temperature range: ����������3 year limited hardware warranty Configuration Guide for available 0°C to 70°C configurations. �������� http://www.condoreng.com ■ 1.8"x3.9" (single-wide IP Module) TM ©2006 GE Fanuc Embedded Systems. All rights reserved. Printed in the USA. BusTools/ARINC is a 101 W. Anapamu Street, Santa Barbara, CA 93101 trademark of Condor Engineering, Inc. All other trademarks are the property of their respective owners. Specifications may change without notice. IP-708 4/06 Tel 805.965.8000 • Fax 805.963.9630