GE Fanuc Intelligent Platforms RAF-EC-2P RoHS Dual Port ARINC 664 ExpressCard Interface Features Architecture Software • AFDX/ARINC 664 dual port interface (two GE Fanuc Intelligent Platforms’ RAF-EC-2P is The RAF-EC-2P comes with all the software independent 10/100 MHz duplex ports) a high performance interface for monitoring, development tools needed for user application generating or analyzing full-bandwidth AFDX- development at no extra charge. The Cpcap, • RoHS Compliant ARINC 664 protocol traffic. GE Fanuc Intelligent packet capture library, provides a complete • Includes AFDX and low-level Software Platforms’ exclusive pipeline architecture set of function for transmitting and receiving Developer’s Kit (SDK) at no additional charge maximizes packet throughput using parallel Ethernet frames. Frames from multiple ports • Advanced reception features controllers and efficient DMA transfers, can be logged or replayed using the open- - 20 nsec time-tags thereby avoiding the bottlenecks of CPU-based source ntar log-file format. CFDX implements - IRIG-B synchronization interface solutions. the ARINC 664/AFDX protocol stack including - DMA transfer to host End Systems, redundancy management, Virtual - Full throughput capability Configurable as either one dual-redundant Links and Ports. An advanced XML-based - Link level error detection AFDX/ARINC 664 interface or two independent Configuration File format is used to specify • Advanced Transmission Scheduling ports, users have complete access to all End Systems, and an AFDX-aware version of - Highly accurate frame and header data. Each incoming packet Ethereal is included to provide GUI analysis of - Flexible scheduling modes is tagged with a 20 nsec resolution, 64-bit logged files. - DMA transfer to host time-tag. Read time traffic generation is highly accurate. An IRIG-B receiver/generator is - Full throughput capability included for synchronization to external IRIG-B - Link level error detection time sources and for synchronizing multiple • Advanced Software Support CNIC boards. In addition, I/O triggers, error - Flexible packet capture API detection/injection, BIT, and link/protocol level - AFDX/ARINC 664 API statistics are provided. - XML configuration format - Integrated log file format AFDX/ARINC 664 Performance - Berkeley packet filter engine The RAF-EC-2P features two independent • Four bi-directional avionics level discretes 10/100 MHz duplex ports, capable of • Two input and output triggers per channel simultaneously receiving back to back Ethernet • Built-in test features frames with 12 byte interframe gaps at a rate of 100Mbps each. Each port is capable of transmitting back to back Ethernet frames with 12 byte interframe gaps at a rate of 100Mbps; with both ports transmitting simultaneously, current express card technology limits the total rate to not less than 50% rate for two channels simultaneously or 100% performance for one channel at a time. RAF-EC-2P: RoHS Dual Port ARINC 664 ExpressCard Interface Specifications Physical Receive Statistics (64-bit counters) Transmit Statistics (64-bit counters) • ExpressCard • Separate counter for Link level errors • Total packets transmitted • Dimensions: Standard 54mm - Physical symbol • Total bytes transmitted Express Card dimensions - Invalid preamble symbol Error Injection - Invalid or missing SFD Environmental • Physical symbol error - Unaligned frame • Operating Temp Range: 0°C to 55°C • Preamble (symbol and length) errors - IFG too short • Relative humidity: 5 to 90% • Framing (byte alignment) error - Frame too short • SFD (Start Frame Delimiter) error - Frame too long Software • CRC error - CRC errors • Windows XP support. Contact factory about availability of support for additional operating envi- Power (max.) Ethernet Frame Transmission ronments (including LabVIEW.) • 3 Watts max • Ethernet frames transferred from host buffers via • Cpcap API Library DMA • CFDX API Library • Transmission scheduling with 20 nsec resolution • Ethereal GUI for ntar file analysis • Flexible scheduling modes - Minimum IFG delay (960 nsec between frames) Connections - Per-frame specified delays (multiple conditions) • Transition cable is provided - On external trigger • Two IEEE 802.3 compliant Ethernet RJ-45 connectors - Playback delay modes • High density 15-pin D-sub connector for In/Out • Interrupt generation or user-identified frames triggers per port and four bi-directional avionics- level discretes Timing Reference Ordering Information • 64-bit time tag • IRIG-B receiver (AM or TTL/DC) RAF-EC-2P • IRIG-B generator (TTL/DC) AFDX Express Card, dual port interface, RoHS compliant • IRIG-B PPS synchronization with time tag • Software-selectable internal wrap Optional Software Triggering BT-AIL • Wait for external trigger to transmit AFDX traffic analyzer • Output when marked frame is transmitted • Output when error-free packet received BT-AIL-FAN • Output when error packet received AFDX traffic analyzer file analysis Port Parameters • Full Duplex IEEE 802.3 compliant ports • Software-selectable 10/100 Mbps data rates • Software-selectable auto-negotiation • Software-selectable internal wrap Ethernet Frame Reception About GE Fanuc Intelligent Platforms • Ethernet frames transferred to host buffers via DMA GE Fanuc Intelligent Platforms is a leading global provider of embedded computing solutions for a • Min-to-copy capability wide range of industries and applications. Our comprehensive product offering includes many types • High resolution time-tagging with 20 nsec resolution of I/O, single board computers, high performance signal processors, fully integrated, rugged systems • Link level error detection including flat panel displays, plus high speed networking and communications products. The company is headquartered in the U.S. and has design, manufacturing and support offices throughout the world. Whether you’re looking for one of our standard products or a fully custom solution, GE Fanuc Intelligent Platforms has the breadth, experience and 24/7 support to deliver what you need. For more informa- tion, visit www.gefanuc.com. GE Fanuc Intelligent Platforms Additional Resources Information Centers For more information, please visit the GE Fanuc Americas: Intelligent Platforms web site at: 1 800 322 3616 or 1 256 880 0444 Asia Pacific: www.gefanuc.com +81 3 5544 3973 EMEA: Germany: +49 821 5034-0 UK: +44 1327 359444 ©2007 GE Fanuc Intelligent Platforms. All rights reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. 12.07 GFA-1039