EVOC 104-1711CLDN
Specifications
Form Factor
PC/104
Ethernet Chipset
Intel 82562
System Chipset
Intel 852GM
Video Chipset
Intel 852GM
Certification
CE, RoHS
CompactFlash
1 x CompactFlash Type I/II socket
Dimensions
116mm x 109mm
Display Controller
Intel® 852GM Integrated
Display Memory
64MB shared memory
Dual Display
VGA+LVDS
Embedded OS Support
Linux/XP Embedded
Ethernet Connector
1 x RJ45
Ethernet Controller
Integrated Intel® 82562ET Ethernet controller
Ethernet Speed
10/100Mbps
Expansion Interface
PCI-104 expansion bus
Hardware Monitor
Monitors CPU temperature, voltage and fan speed
IDE
1 x ATA100 IDE interface, supporting two IDE devices
Operating Humidity
5%-90%, non-condensing
Operating Temperature
0C ~60C (optional -40C ~70C)
Parallel Port
1 x LPT
Power Consumption
Typical 8.4W (Intel® Pentium® M 1.4GHz, 512MB Memory)
Power Supply
+5V, +12V AT power interface
Processor
Onboard Intel® ULV Celeron® M 800MHz CPU, optional Pentium® M 1.1/1.6GHz
Resolution
VGA mode - up to 1600 x 1200@85Hz
Serial Port
1 x RS-232, 1 x RS232/RS422/RS485
Storage Temperature
-40C ~80C
System Memory
1 x 200-pin SODIMM socket, DDR 200/266MHz up to 1GB
Sysytem Chipset
Intel® 852GM + ICH4, 400MHz FSB
USB
4 x USB2.0
Watchdog Timer
1~255 sec./min. timer system reset or interrupt, setup by software
Windows OS Support
Windows 98SE/Windows XP
Features
- 10/100Mbps Ethernet controller
- 2 x serial port, 1 x parallel port, 4 x USB 2.0 high-speed port
- CompactFlash Type I/II socket
- Intel® 852GM chipset, supporting LVDS/VGA dual display
- Supports Intel® Celeron® M/Pentium® M high performance, low-power CPU
Datasheet
Extracted Text
PC/104 Embedded SBC 104 Form Factor Motherboard PC/104 Embedded SBC 104 Form Factor Motherboard Board Diagram 104-1711CLDN PC/104 SBC with Intel® CPU/Memory and LCD/VGA/LAN +5V and +12V DC Input Processor Onboard Intel®® Celeron M CPU 2 x COM 479uFCBGA IDE GMCH KB/MS SO-DIMM VGA Intel Onboard DDR200/266 82852GM/GME Memory LPT LVDS CF 4 x USB VGA KB/MS LPC LAN 1 10/100Mbps 1 Full-Size/Half-Size Full-Size/Half-Size Slot CPU Cards LAN Slot CPU Cards Serial Port Super I/O LVDS PCI-104 Bus USB2.0 LPT 2 2 ICH4 SBC/Motherboard/ SBC/Motherboard/ BIOS Modules Modules IDE& CF Card PCI-104 3 3 PCI BUS Wide Embedded Embedded 0C Connector Box PC CERTIFIED Box PC Temperature 4 4 Network Application Network Application Computers Computers Features Supports Intel® Celeron® M/Pentium® M high performance, low-power CPU Available Accessories Intel® 852GM chipset, supporting LVDS/VGA dual display 5 5 Name Description Qty. Part Number 10/100Mbps Ethernet controller Industrial PC Industrial PC 2 x serial port, 1 x parallel port, 4 x USB 2.0 high-speed port Driver CD/Protective film/RoHS 104-1711CLDN 1 CompactFlash Type I/II socket 2330-000011 Jumper/RoHS 2.0mm pitch 4 2360-000831 Y-cable for keyboard and mouse/RoHS PS/2 port connector to 2x4 Pin, length: 300mm/RoHS 1 6 6 Specifications HMI HMI 2360-000851 VGA cable/RoHS VGA connector to 2x8 Pin, length: 220mm/RoHS 1 System 2360-002601 Power cable/RoHS One TJC6-7Pin (3.96mm pitch) port to two male 4 Pin, connector (5.08mm pitch), length: 200mm/RoHS 1 Display Processor Onboard Intel® ULV Celeron® M 800MHz CPU, optional Display Controller Intel® 852GM Integrated 2360-006641 LAN cable/RoHS RJ45 connector to 2x5 Pin, length: 150mm/RoHS 1 Pentium® M 1.1/1.6GHz Display Memory 64MB shared memory 7 7 2360-008351 Serial port cable/RoHS DB9 connector to 2x5 Pinconnector (2.54mm pitch), length: 300mm/RoHS 2 EVOC Rugged Chipset Intel® 852GM + ICH4, 400MHz FSB Resolution VGA mode: up to 1600 x 1200@85Hz EVOC Rugged Series Series 2360-008361 DB25 connector to 2x13 Pin connector (2.54mm pitch), length: 300mm/RoHS 1 Memory 1 x 200-pin SODIMM socket, DDR 200/266MHz up to 1GB Dual Display VGA+LVDS Parallel port cable/RoHS Hardware Monitor Monitors CPU temperature, voltage and fan speed Ethernet 2360-008781 40 Pin to 44 Pin (2.0mm pitch), length: 550mm/RoHS 1 HDD cable/RoHS Watchdog Timer 1~255 sec./min. timer system reset or interrupt, setup by software Ethernet Controller Integrated Intel® 82562ET Ethernet controller 2360-010841 Dual USB ports with bracket/RoHS Two USB ports to one 2x4 Pin, connector (2.54mm pitch), length: 300mm/RoHS 2 Expansion Interface PCI-104 expansion bus 8 8 Speed 10/100Mbps MCC Series 2391-002141 MCC Series Storage Nut/RoHS M3/GB-T6170-1986/nickel plating 4 1 x RJ45 Connector Interface 2391-004631 IDE 1 x ATA100 IDE interface, supporting two IDE devices Copper hex bolts/RoHS M3x25-4/CH-M3-25-4-Ni 4 Mechanical and Environmental Serial ATA N/A Dimensions 116mm x 109mm Setup Guide/RoHS AMI/BIOS Setup Guide (for CORE8) 1 Floppy N/A Operating Temperature 0 ~60 (optional -40 ~70 ) 9 User's Manual/RoHS 104-1711CLDN 1 9 CompactFlash 1 x CompactFlash Type I/II socket Chassis Storage Temperature -40 ~80 Chassis DOC/DOM N/A Operating Humidity 5%-90%, non-condensing Ordering Information I/O Interface Power USB 4 x USB2.0 Part Number Model Number Description Power Supply +5V, +12V AT power interface Serial Port 1 x RS-232, 1 x RS232/RS422/RS485 10 10 Power Consumption Typical 8.4W (Intel® Pentium® M 1.4GHz, 512MB Memory) Motherboard/Celeron®-M 600M/RoHS 0030-005941 104-1711CLDN/CM-600 Parallel Port 1 x LPT Data Acquisition Data Acquisition Boards & Modules Operating System Boards & Modules Motherboard/Celeron®-M 600M CAN N/A 0030-005940 104-1711CLDN/CM-600 Windows OS Windows 98SE/Windows XP GPIO N/A Motherboard/Celeron®-M 600M/long pin 0030-000890 104-1711CLDN/CM-600/long pin Embedded OS Linux/XP Embedded Audio N/A Motherboard/Celeron®-M 800M/long pin 0030-011180 104-1711CLDN/CM-800/long pin Certification 11 11 Motherboard/Celeron®-M 1G Accessories CE, RoHS 0030-000930 104-1711CLDN/CM-1G Accessories Motherboard/Celeron®-M 1G/long pin 0030-000920 104-1711CLDN/CM-1G/long pin Motherboard/Pentium®-M 1.4G 0030-000910 104-1711CLDN/PM-1.4G Motherboard/Pentium®-M 1.4G/RoHS 0030-000911 104-1711CLDN/PM-1.4G Motherboard/Pentium®-M 1.4G/long pin 0030-000900 104-1711CLDN/PM-1.4G/long pin Motherboard/Celeron®-M 600M/RoHS/Conformal coating 0030-004301 104-1711CLDNCM-600/Conformal coating 2-47 2-48 The images are for reference only, and all product specifications are subject to change without notice. The images are for reference only, and all product specifications are subject to change without notice.
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the 104-1711CLDN?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods