10 WATT
AC-DC
CONVERTER
BNS/ BNSE-SA Series
Specifications Model
BNS3.3SA-U BNS05SA-U BNS12SA-U BNS15SA-U BNS24SA-U
BNS**SA-U/BNSE**SA
10WATTS/SINGLE BNSE3.3SA BNSE05SA BNSE12SA BNSE15SA BNSE24SA
Input Characteristic
Input Voltage AC100-115V
Input Current 0.3A
Input Range AC85-132V(DC110-175V)
Input Frequency 50/60Hz
Input Frequency Range 47-440Hz
Phase Single
Inrush Current *1 20A(typical) at AC100V
Efficiency [%] (typical) *2 67 70 73 75 76
ETA-USA Tel: 408-778-2793 Fax: 408-779-2753 e-mail: sales@eta-usa.com
Specifications Model
BNS**SA-U/BNSE**SA BNS3.3SA-U BNS05SA-U BNS12SA-U BNS15SA-U BNS24SA-U
BNSE3.3SA BNSE05SA BNSE12SA BNSE15SA BNSE24SA
10WATTS/SINGLE
Output Voltage [V] 3.3 5 12 15 24
Output Current [A] 2.0 2.0 0.9 0.7 0.5
Voltage Adjust Range +/- 10% of Rated Output Voltage(at no load within the input range)
Ripple and Noise [mVp-p](maximum) *3 80 80 120 120 120
Regulation
a.Statistic Line Regulation [mV](maximum) 26 40 96 120 192
b.Statistic Load Regulation [mV](maximum) 30 45 108 135 216
c.Temperature Coefficient *4 0.03%/C
d.Drift[mV](maximum) *5 32 40 75 90 135
e.Dynamic Load Regulation [mV](typical) *6 not specified
f.Recovery Time *6 not specified
Rise up time 200mS(maximum) at 25C and rated input/output
Hold up time 20mS(typical) at 25C and rated input/output
Functions
Overcurrent Protection *7 = or >105% of
Current Limiting with automatic recovery
Rated Output Current[A]
2.1 2.1 0.95 0.74 0.53
Overvoltage Protection = or >115% of Rated
Zener diode clamping
Output Voltage[V]
3.8 5.75 13.8 17.3 27.6
Remote Sense not available
Remote On/Off not available
Environmental
Operating Temperature -10 to +50C
Operating Humidity 20 to 90%RH(non-condensing)
Storage Temperature -20 to +75C
Storage Humidity 20 to 90%RH(non-condensing)
Withstanding Voltage
Primary-Secondary AC2,000V for 1minute
Primary-Frame Ground AC2,000V for 1minute
Secondary-Frame Ground AC500V for 1minute
Isolation Resistance Primary-Secondary-Frame Ground 50MOhm(minimum) by DC500V insulation tester
2
Vibration
5-10Hz:10mm double amplitude,10-55Hz:19.6m/s ,20minutes' period for 60minutes each along X,Y,Z axes(non-operating)
2
Shock 196m/s
Cooling Convection
Leakage Current 0.5mA(maximum) at 25C,rated input/output and rated input frequency
Line Conducted Noise
Built to meet FCC Part15-B Class B
Built to meet VCCI Class B
Safety
UL: UL1950(Except BNSE)
C-UL: CSA C22.2 No.950(Except BNSE)
Weight (typical) open board type:60g
MTBF [H] 650,000
Switching Frequency[kHz](typical) *8 64 66 66 66 85
Conditions:
*1at cold start
*2 at DC130V input/rated output
*3 measured by a bayonet probe at the end of a pair of 15cm long wires terminated with a 100uF electrolytic
capacitor and 0.1uF film capacitor in parallel at a 0 to 20MHz bandwidth
*4 at -10 to +50℃
*5 for 7hour period after 1hour warm-up at 25℃ and rated input/output
*6 when output current changed from 25% of rated output current to 75% rapidly at AC100V input
*7 for less than 1minute of overcurrent and short circuit
*8 variable change on input voltage and load conditions
ETA-USA Tel: 408-778-2793 Fax: 408-779-2753 e-mail: sales@eta-usa.com
Manufacturers
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods