MVME51105E-2163 - EMERSON NETWORK POWER

Image of EMERSON NETWORK POWER MVME51105E-2163

Description

Emerson MVME51105E-2163 VMEbus Processor Module - 400 MHz MPC7410, 512MB ECC SDRAM, 17MB flash and 2MB L2 cache IEEE 5E

Part Number

MVME51105E-2163

Price

Request Quote

Manufacturer

EMERSON NETWORK POWER

Lead Time

Request Quote

Category

Single Board Computers

Specifications

Address/Data

A32/D32/D64
A32/D32/D64, PMC PN1, PN2, PN3, PN4 connectors

Arbiter

RR/PRI

Architecture

64-bit, single interleave

Async Baud Rate, bps max.

38.4K EIA-232, 115Kbps raw

Capacity

1MB via two 32-pin PLCC/CLCC sockets; 16MB surface mount
32KB (4KB available for users)
Up to 512MB on-board, expandable to 1.5GB with RAM500 memory mezzanines

Cell Capacity Life

5 years at 100% duty cycle, 25 C

Cell Storage Life

50 years at 55 C

Configuration

RS-232 DTE/DCE

Connector

114-pin connector located on the planar of the MVME5100
One routed to front panel RJ-45, one on planar for development use
One routed to front panel RJ-45, one routed to front panel RJ-45 or optionally routed to P2, RJ-45 on MVME761

Controller

16C550C UART
Tundra Universe
Two Intel 82559ER

Depth

160.0 mm (6.3 in.)

DTB Master

A16–A32; D08–D64, BLT

DTB Slave

A24–A32; D08–D64, BLT, UAT

Front Panel Height

261.8 mm (10.3 in.)

Height

233.4 mm (9.2 in.)

Interface Speed

10/100Mbps

Interrupt Handler/Generator

IRQ 1–7/Any one of seven IRQs

Location Monitor

Two, LMA32

Max. Component Height

14.8 mm (0.58 in.)

Module Types

Two single-wide or one double-wide, front panel or P2 I/O

Number of Ports

Two, 16550 compatible

PCI Bus Clock

33 MHz

PCI Local bus DMA

Yes, with PCI burst

Power

+3.3V, +5V, ±12V; 7.5 watts maximum per PMC slot

Read Access (16MB port)

70 clocks (32-byte burst)

Read Access (1MB port)

262 clocks (32-byte burst)

Read Burst Mode

7-1-1-1 idle; 2-1-1-1 aligned page hit

Real-Time Timers/Counters

Four, 32-bit programmable

Removable Battery

Yes

Signaling

Single Cycle Accesses

10 Read/5 Write

System Controller

Yes, jumperable or auto detect

TOD Clock Device

M48T37V

Type

EEPROM, on-board programmable
PC100 ECC SDRAM with 100 MHz bus

Watchdog Timer

Time-out generates reset

Width

19.8 mm (0.8 in.)

Write Burst Mode

4-1-1-1 idle; 2-1-1-1 aligned page hit

Features

100 MHz frontside bus
17MB fl ash memory
32KB NVRAM and time-of-day clock with replaceable battery backup
64-bit PCI expansion mezzanine connector allowing up to four more PMCs
Dual 10BaseT/100BaseTX Ethernet
Dual 16550 compatible async serial ports
Dual IEEE P1386.1 compatible 32/64-bit PMC expansion slots
Four 32-bit timers and one watchdog timer
MPC7410, MPC750 or MPC755 microprocessor with 32KB/32KB L1 cache
On-board debug monitor
Single VME slot even when fully configured with two PMC modules and both add-on memory mezzanines
Up to 2MB of secondary backside cache
Up to 512MB of on-board ECC SDRAM – expandable up to 1GB with optional RAM500 memory expansion modules

Frequently asked questions

Industrial Trading' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Industrial Trading will definitely serve you. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Industrial Trading. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products