ATCA-7105/7107 AdvancedTCA Processor Blade Front page ® ® Designed for PICMG 3.0 and 3.1 AdvancedTCA compliant systems, the Emerson The ATCA-7105/7107 ® Network Power ATCA-7105/7107 processor blade features the 1.8 GHz Intel processor blade is designed ® Pentium M processor with a high MIPS/watt capability in an 8U form factor. The to operate within the processor delivers outstanding performance and supports light I/O and/or coprocessing Emerson Centellis™ series of via PMC sites; making it ideal for implementing almost any control plane applications. application-ready platforms ® It also includes an Intel E7501 chipset with a memory bandwidth of 4.3GB/s, Interior page accommodates four PMC modules for additional processing power and/or I/O, and n High performance processor supports 4GB ECC-protected DDR266 SDRAM. blade with four PMC sites n RoHS (5 of 6) compliant The ATCA-7105/7107 blades are RoHS (5 of 6) compliant, eliminating the need for customers to incur the time, resource and expense associated with creating and/or n 1.8 GHz Intel Pentium M converting existing product to meet this international requirement. processor n Intel E7501 server-class chipset The ATCA-7105/7107 blade features a managed, multi-layered 16-port Gigabit supporting 4.3GB/s memory Ethernet switch that delivers the flexibility required for routing Gigabit Ethernet bandwidth interfaces between the base board control processor, the PMC-based processing or I/O nodes, and the PICMG compliant base and fabric interfaces on the ATCA-7107. n Up to 4GB ECC-protected The ATCA-7105/7107 is available in two memory configurations (2GB and 4GB) and DDR266 SDRAM supports optional, on-board parallel and serial ATA hard drive devices; adding to the n Complete software operating performance and flexibility of this processor blade. environment including OS available to support Centellis 31K platforms n PICMG 3.0 Gigabit Ethernet base interface support (ATCA-7107 only) n PICMG 3.1, Option 1 and 2 fabric interface support n Multiple hard disk drive options ™ n Service Availability Forum (SA Forum) compliant HPI interfaces n Designed for NEBS and ETSI compliance Front page Interior page Block Diagram Front Panel Interfaces Intel Pentium M 4GB Flash USB 1.8 GHz USB DDR SATA RS-232 HDD RS-232 Zone 3 Intel Keyboard/ Intel Intel Hance mouse P64H2 E7501 Rapids PCI-X PCI-X 2xGbE PMC 2xGbE ATCA-7107 Phy 2xGbE Fabric PMC 4xGbE Zone 2 Interface 16-port GbE Switch Base PMC 2xGbE 2xGbE Interface Phy 2xGbE PMC IPMC IPMI Zone 1 –48 VDC DC/DC Standard Networking Support Software Support The ATCA-7105/7107 processor blade provides The ATCA-7105/7107 AdvancedTCA blade can be PICMG 3.0 base interface connectivity in a dual star configured with a variety of software offerings, from configuration using standard Gigabit Ethernet simple firmware to fully integrated and verified technology. The PICMG 3.1 fabric interface is also software operating environment for the Centellis supported on the ATCA-7107 and several configurations 31KX platform. are available depending on application bandwidth FirmwAre requirements. This blade-level support is offered for customers taking ° PICMG 3.1, Option 1 – Single, redundant Gigabit on the integration and verification responsibilities. It Ethernet pair (1.0Gbps) provides all the boot and IPMC firmware required for ° PICMG 3.1, Option 2 – Dual, redundant Gigabit an ATCA blade. Ethernet pairs (2.0Gbps) SOFTwAre PACKAGeS Processor Complex The Centellis 31KX package is based on a standard Carrier Grade Linux (CGL) distribution, MontaVista Surrounding the Intel Pentium M processor is an array CGE 3.1, including HPI-A Remote Client and BIOS of high performance components that combine to upgrade utility. It will be installed to the blade within a form a powerful processor complex. Features include: pre-configured 31KX system environment. ° Up to 4GB, ECC-protected DDR2 SDRAM. ° Intel E7501 server-class chipset supporting 4.3GB/s The Basic Blade Services (BBS) software package is memory bandwidth based on MontaVista CGE 4.01, including BIOS and ° 1.0MB boot flash IPMI firmware upgrade utilities, HPI-A and HPI-B ° Parallel and SATA hard disk drive options support. 2 Front page Interior page Software add-ons including BIOS upgrade utility and memOry device driver for Red Hat Linux RHEL5 and MontaVista CGE 4.01. ° Up to 4GB, ECC-protected SDRAM. Supported configurations – 2GB and 4GB Available system software services: ° 256Byte CMOS NVRAM for BIOS configuration ° Remote Update services to update the firmware ° 1.0MB boot flash, single bank architecture of all IPMCs and Shelf Management Controller ° 1.0MB backup boot flash (can alternatively be used within a system environment as application flash) ° PXE based boot of diskless clients ° Support for CompactFlash card ° Rolling upgrade of application software COUNTerS/TimerS reLeVANT STANDArDS ° Real-time clock ° Linux Foundation ° Programmable watchdog timer ° SA Forum PCi meZZANiNe CArD Å Hardware Platform Interface (HPI) – Four PMC sites with 100 MHz PCI-X interface and dual rev. 1.0, A .01.01 Gigabit Ethernet interface For more information on the Centellis 31KX platform, please refer to the Centellis 31KX datasheet. BASe AND FABriC iNTerFACeS ° Dual star configuration Intelligent Platform Management Control ° PICMG 3.0 base interface compliant, Gigabit The PICMG 3.0 AdvancedTCA standard specifies a Ethernet (1.0Gbps) low-level, environmental management architecture ° PICMG 3.1 fabric interface compliant, Gigabit referred to as intelligent platform management Ethernet interface (IPMI). The ATCA-7105/7107 blade imple- Å PICMG 3.1, Option 1 – Single, redundant Gigabit ments this functionality using hardware and software Ethernet pair (1.0Gbps) based IPM controller that monitors all local, blade- Å PICMG 3.1, Option 2 – Dual, redundant Gigabit specific environmental information. Management Ethernet pairs (2.0Gbps) access to this information is provided through the SA Forum defined HPI interface. eXTerNAL iNTerFACeS ° Front Panel Rear Transition Modules Å USB 2.0, mini USB Type AB (2) Emerson offers a rear transition module (RTM) for the Å Serial, RJ-45 (2) ATCA-7105/7107 processor blade for access to an Å Keyboard/mouse, PS2 (1) assortment of interfaces like USB, keyboard/mouse as ° Via Optional RTM well as SATA storage interfaces. Å USB 2.0, Type A (2); Serial, RJ-45 (2); SATA (1). PMC Site Å From PTMC: E1/T1, RJ-45 (16); Serial, RJ-45 (2) Å Keyboard/mouse, PS2 (1) The ATCA-7105/7107 blade provides four, single width IEEE1386.1-2001 PMC sites. The PMC site POwer reQUiremeNTS supports PCI-X 64-bit 133 MHz capable PMC mod- ° Dual-redundant –48V rails ules. These can be used for any combination of ° Input range: 39.5 – 72 VDC processor, coprocessor or I/O functions. ° Typical power: 120 – 140W Hardware THermAL CHArACTeriSTiCS PrOCeSSOr Operating range: –5° C to 55° C ° 1.8 GHz Intel Pentium M Processor BLADe SiZe ° 512KB L2 on-chip cache 8U form factor, 280 mm X 322.5 mm, single slot ° 400 MHz frontside bus ° Intel E7501 system controller 3 Front page Interior page reLeVANT STANDArDS ° PICMG 3.0 (form factor, IPMI, base interface, hot swap, RTM) ° PICMG 3.1, Option 1 and 2 Ordering Information Please contact a Emerson sales representative or authorized distributor to order this product. Regulatory Compliance Item Description Designed to comply with NEBS GR-63-CORE, NEBS Physical Protection, Level 3 GR-1089-CORE, Electromagnetic Compatibility and Electrical Safety — Generic Criteria for Network Telecommunications Equipment. Level 3, Equipment Type 2 Designed to comply with ETSI ETSI Storage, ETS 300 019-2-1, Class 1.2 equipment, Not Temperature Controlled Storage Locations ETSI Transportation, ETS 300 019-2-2, Class 2.3 equipment, Public Transportation ETSI Operation, ETS 300 019-2-3, Class 3.2 equipment, Partly Temperature Controlled Locations Designed to comply with Acoustic ETS-300-753, Equipment Engineering (EE); Acoustic noise emitted by telecommunications equipment EMC EN-300-386 Electromagnetic compatibility and Radio spectrum Matters (ERM); telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements, Telecommunication equipment room (attended) FCC 47 CFR Part 15 Subpart B (US), Class A EMC Directive 89/336/EEC (EU) AS/NZS 3548 (Australia/New Zealand), Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment VCCI Class A (Japan), Voluntary Control Council for Interference by Information Technology Equipment Safety Compliance to UL/CSA 60950-1, EN 60950-1 and IEC 60950-1 CB Scheme. Marked with U.S. NRTL, Canadian Safety and CE Mark. Safety of information technology equipment, including electrical business equipment ETS 300-132-2 Environmental Engineering (EE); Power supply interface at the input to telecommunications equipment; Part 2: Operated by direct current (dc) RoHS/WEEE compliance DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) DIRECTIVE 2002/96/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on waste electrical and electronic equipment (WEEE) 4 Front page Interior page SOLUTiON SerViCeS Emerson Network Power provides a portfolio of solution services optimized to meet your needs throughout the product lifecycle. Design services help speed time-to-market. Deployment services include global 24x7 technical support. Renewal services enable product longevity and technology refresh. Plus solution extras include enhanced warranty and repairs. PICMG, AdvancedTCA and the AdvancedTCA logo are registered trademarks of the PCI Industrial Computer Manufacturers Group. Service Availability is a proprietary trademark used under license. Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. All other product or service names are the property of their respective owners. This document identifies products, their specifications, and their characteristics, which may be suitable for certain applications. It does not constitute an offer to sell or a commitment of present or future availability, and should not be relied upon to state the terms and conditions, including warranties and disclaimers thereof, on which Emerson Network Power may sell products. A prospective buyer should exercise its own independent judgment to confirm the suitability of the products for particular applications. Emerson Network Power reserves the right to make changes, without notice, to any products or information herein which will, in its sole discretion, improve reliability, function, or design. Emerson Network Power does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent or other intellectual property rights or under others. This disclaimer extends to any prospective buyer, and it includes Emerson Network Power’s licensee, licensee’s transferees, and licensee’s customers and users. Availability of some of the products and services described herein may be restricted in some locations. AC Power Systems Embedded Power Precision Cooling Emerson Network Power. Connectivity Integrated Cabinet Solutions Services The global leader in enabling DC Power Systems Outside Plant Site Monitoring ™ Business-Critical Continuity . Embedded Computing Power Switching & Control Surge & Signal Protection Business-Critical Continuity, Emerson Network Power and Emerson Network Power the Emerson Network Power logo are trademarks and Offices: Tempe, AZ U.S.A. 1 800 759 1107 or +1 602 438 5720 Madison, WI U.S.A. 1 800 356 9602 or +1 608 831 5500 service marks of Emerson Electric Co. Shanghai, China +8610 85631122 Paris, France +33 1 69 35 77 00 Tokyo, Japan +81 3 5424 3101 ©2008 Emerson Electric Co. Munich, Germany +49 (0) 89 9 608 2 333 Hong Kong, China +852 2966 3210 Tel Aviv, Israel +972 3 568 4387 www.EmersonNetworkPower.com/EmbeddedComputing ATCA7107-D4 02/08