Embedded Computing for ™ Business-Critical Continuity PmPPC440 PMC Modules PowerPC™-based Emerson’s PmPPC440 is a complete low-power processor subsystem in a very com- ProcessorPMC pact, industry standard form factor. It is designed to allow communication equip- ment manufacturers to add modular and upgradable compute functionality to their I/O baseboard and provide the localized horsepower necessary for applications such ■ as protocol processing, packet processing, data filtering or I/O management. AMCC PowerPC® 440GP processor running at 400MHz Using an off-the-shelf processor subsystem saves you time-to-market by allowing ■ Up to 133MHz PCI-X inter- you to focus your engineering efforts on the key value-add portions of the system face, backwards compatible without spending time and effort on the processor design and testing. A modular with PCI 2.1 processor subsystem also lowers your lifetime cost of ownership by providing an ■ 64MB, 128MB, 256MB, easy upgrade path, and protecting you from obsolescence issues. 512MB or 1GB DDR ECC SDRAM in SODIMM package Considerable engineering effort has gone into ensuring maximum flexibility on the ■ PmPPC440. The module can be used in both Processor-PMC Monarch and Non- Dual 10/100BaseTX Ethernet Monarch modes, which means that it can act as the host (Monarch) of the local PCI interfaces with front bezel access bus or be a target (Non-Monarch) on the local PCI bus depending on the application or baseboard. We’ve also implemented the SDRAM memory using SODIMM pack- ■ Processor-PMC Monarch and aging, the same memory package used dominantly in laptop computers. Non-Monarch modes ■ Dual serial ports via PMC P14 or single serial port via front bezel 2 ■ I C interface ■ VxWorks and Linux support ■ RoHS/WEEE compliant configuration available ■ Quality assured by over 30 years of design experience and a TL-9000 and ISO 9001:2000 certified quality management system. (FM 26789) ISO 9001:2000 FM 26789 Embedded Computing for PmPPC440 ™ Business-Critical Continuity PMC Modules DEVELOPMENT MEZZA- PROCESSOR I/O NINE CARD (DMC) ■ ■ AMCC PowerPC® 440GP Ethernet Optional plug-on card (side Core 2) to speed development ▲ Two 10/100BaseTX Serial P Serial Port ort Ethernet Ethernet Ethernet Ethernet ■ ▲ 400+ MHz Ethernet ports Processor JTAG/COP Front Mini- Mini- header for software ■ • 32K I & 32K D L1 cache Optional front bezel RJ45 RJ45 RJ45 RJ45 USB USB Panel development 64-way set associative access (isolated) ▲ Four software-readable ■ • 32-bit Book E enhanced Optional PMC P14 configuration jumpers PowerPC architecture access (non-isolated) Reset Switch ▲ 32-pin PLCC socket for ■ ▲ MMU Link/Activity LEDs for Development Mezzanine Card (DMC) software development each Ethernet port on ■ 8KB on chip SRAM Programming ROM ▲ LEDs front bezel Four development user- Header Socket On-Chip Peripherals programmable LEDs ■ Serial Ports ■ Dual serial I/O COP ▲ Jumpers Single connector to ▲ Two async serial ports Header ■ General Purpose Timers attach to PMC module (RS-232 level signaling) (GPT) Note: Ethernet and serial ▲ 3.3V Dual serial port via PMC Power ■ 2.5V GPIO connectors not used when Monitor P14 or single serial port 1.8V 2 ■ I C connected to PmPPC440 via front bezel with mini ■ Dual 10/100 Ethernet USB style connector RS-232 CPLD LEDs PHY Reset Control 2 MACs ■ I C Chip Selects ■ PHYSICAL CHARACTERISTICS Registers DDR memory controller ▲ Master or slave ■ PCI/PCI-X interface configuration ■ Specifications 16-128MB Flash ■ ▲ 4 Channel DMA controller Access via PMC P14 ▲ IEEE 1386.1 CMC/PMC AMCC 440GP connector 1.25V Supply ▲ VITA 32 Processor-PMC ■ 1.8V Supply Recessed front bezel reset MEMORY ■ Power requirements: switch 2.5V Supply 3.3 Vdc @ <7W (est) SDRAM ■ 4 development user-pro- ■ Operating range: 0º to 55º ■ 64, 128, 256, 512MB or grammable surface mount DDR SDRAM Ethernet* C, 5-95% relative humidity 64/128/256/512MB 1GB of x72 DDR SDRAM LEDs on PMC module 1GB with ECC Device Bus (non-condensing) with ECC ■ 4 GPIO via PMC P14 PCI Serial EEPROM ■ 266MHz operation 2 I C SOFTWARE SUPPORT RTC ■ Modular SODIMM GPIO OFF-CHIP PERIPHERALS 440GP Config ROM packaging ■ Monitor/Boot loader Flash ■ Real-time clock ■ Board support package for ■ 16 to 128MBytes Flash ■ VxWorks 5.5 Supercap backup power P11 P13 memory 2 ■ ■ I C-based Board support package for ■ Intel StrataFlash™ Linux architecture Serial I/O* PCI/PCI-X ■ 4 banks x 16-bits REGULATORY COMPLIANCE organization ■ 33/66/133 MHz operation P12 P14 ■ Flash Architecture NOR ■ UL/CSA/IEC 60950 ■ 32/64-bit data path NVRAM ■ FCC Part 15 (US) ■ Monarch and Non-Monarch * Ethernet and Serial I/O configuration options: ■ 2K NVRAM - I/O via front panel ■ EN 300386 mode support (local PCI - I/O via P14 connector 2 ■ I C-based host or peripheral) ■ Applicable sections of ■ PCI 2.2 and PCI-X v1.0 NEBS Telcordia GR-63 compliant and GR-1089 ■ ICES 003 (Canada) AC Power Systems Embedded Power Precision Cooling Emerson Network Power. Connectivity Integrated Cabinet Solutions Services The global leader in enabling ™ DC Power Systems Outside Plant Site Monitoring Business-Critical Continuity . Embedded Computing Power Switching & Controls Surge & Signal Protection Emerson Network Power, Embedded Computing Business-Critical Continuity, Emerson Network Power and the ■ 8310 Excelsior Drive Madison, WI 53717-1935 USA Emerson Network Power logo are trademarks and ■ ■ service marks of Emerson Electric Co. US Toll Free: 1-800-356-9602 Voice: +1-608-831-5500 FAX: +1-608-831-4249 ©2006 Emerson Electric Co. Email: info@artesyncp.com 7/06 www.artesyncp.com