Datasheet Station Interface Boards ® Dialogic DI/0408-LS Switching Board ® The Dialogic DI/0408-LS Switching Board is a single-slot, richly conŢgured trunk and station interface board designed for use in small- to mid-size, server-based Private Branch eXchanges (PBXs) and contact center systems. The DI/0408-LS is highly reliable and cost effective, offering an optimized and selectable combination of interfaces and resources for switching applications. The full-size, single PCI slot assembly can function as a standalone solution or can be combined with other hardware via a CT Bus interface (H.100). The DI/0408-LS is a second-generation board that reduces the overall hardware to a single baseboard from the previous baseboard and daughterboard design, while increasing resource availability and options. It is designed to comply with a range of international approvals. The DI/0408-LS supports up to twelve channels of Voice over IP (VoIP) capability. There is no on-board Ethernet NIC interface on the DI/0408-LS; therefore, both the call control and media processing are done through the host Ethernet NIC port. Call control is implemented by host-based stack technology (call control library, IPT CCLib). The media processing of the RTP/RTCP packets is performed by the IP Media Service developed for the DI/0408-LS. The board’s DM3 architecture provides access to independent, high-performance, Ţrmware-based network protocol and media processing resources, which can be operated and integrated on compatible hardware platforms. Features Benefits Four loop start trunk interfaces, dedicated call control and High degree of integration on a single board tone detection, Caller ID detection, and power fail transfer, plus access to sharable voice, conference, and fax resources VoIP capability allows a VoIP call to be connected to the Well-suited for single-board IP-to-PSTN gateway solutions CT Bus Up to eight boards supported in a single PC chassis Enables easy and cost-effective system expansion up to 32 trunks and 64 stations Up to twelve play and record resources, either dedicated to Well-suited for voice messaging, Interactive Voice Response each trunk and station, or independent with transaction record (IVR), and other applications Up to four channels of routable Continuous Speech Processing Support for CSP, conferencing, and fax on a single board (CSP) resources; up to three conferences with up to nine provides efŢciency simultaneous conferees maximum in single or multiple confer- ences; soft fax send-and-receive resources right on board Direct trunk-to-station connections on four analog stations is Provides high reliability by ensuring basic service availability provided on board if the server loses power or becomes unavailable ® Datasheet Dialogic DI/0408-LS Switching Board Technical Specifications Number of ports 12 Maximum boards per system 8 Analog network interface 4 loop start Station interfaces 8 analog Voice play/record resources 12 dedicated or 8 sharable w/transaction record Conference resources 9 Fax ports 2 (V.17 Soft Fax) IP resources 12 dedicated or 4 sharable with voice, conferencing, and fax CLASS signaling Frequency Shift Keying (FSK) Resource sharing bus CT Bus (H.100 compliant) Control microprocessor ARM7 TDMI Digital signal processors 3 Motorola 56311 DSPs @ 150 MHz, each with 150 MIPS minimum ® Supported operating system Windows ; Linux. Details at http:www.dialogic.com/systemreleases CSP Yes Signaling Loop start originate Host Interface Bus compatibility Universal PCI. Complies with PCI Local Bus SpeciŢcation 2.2 Bus speed 33 MHz maximum Bus mode 32- to 16-bit conversion in target mode Shared memory 128 KB page Platform Form factor PCI long card 12.3 in. (31.24 cm) long (without edge retainer) or 13.3 in. (33.78 cm) long (with edge retainer) 0.79 in. (2 cm) wide (total envelope) 3.87 in. (9.83 cm) high (excluding edge connector) Power Requirements (from Host PCI Slot) +5 VDC 1.2 A maximum +12 VDC 10 mA maximum –12 VDC 10 mA maximum Environmental Operating temperature +32°F (0°C) to +122°F (+50°C) Storage temperature -4°F (–20°C) to 158°F (+70°C) Humidity 8% to 80% non-condensing Cooling Conditions for Maximum Operating Temperatures 50°C 0.6 CFM per board 40°C 0.4 CFM per board 30°C 0.3 CFM per board Trunk Interface Trunk type Analog loop start (EIA/TIA 464B) Loop current range 20 mA to 120 mA Ring detection 40 Vrms to 130 Vrms; 15.3 Hz to 68 Hz Ringer equivalence number (REN) 0.6B Battery reversal detection Yes Echo return loss –24 dB minimum Connector RJ-61 (four trunk interfaces) 2 ® Dialogic DI/0408-LS Switching Board Datasheet Technical Specifications (cont.) Station Interface Signaling type Loop start originate Open loop voltage 20.5 VDC ± 1 VDC Closed loop current –25 mA ± 5 mA External power supply option One required per board Internal power supply option Supports up to three boards Ring frequency 20 Hz Ring amplitude 40 Vrms @ 20 Hz minimum into 4 REN 2-wire return loss 25 dB Maximum loop length 3500 ft. (1050 m) using 24 AWG Connector Two RJ-61 (four station interfaces each) ® Dialogic Analog Station Interface Usage WARNING This Dialogic analog station interface product is designed to support analog station equipment only within the walls of a single standalone building or structure (i.e., on-premise). It is not designed to sustain electrical overstress from external sources and factors such as severe weather conditions. Electrical overstress can be introduced on cables extending outside the walls of a single standalone building or structure (i.e., off-premise), such as in a campus environment or other multi- building facility. Severe electrical overstress caused by misuse of this interface product with cables extending outside the walls of a single standalone building or structure could cause property damage and/or personal injury and/or death. Such misuse voids the warranty for this interface product. Audio Input Interface Input impedance 1000 Ohms, AC coupled Maximum input level 600 mVpp Connector 1/8 in. (.31 cm) mini-phone jack Facsimile Specifications Fax resources 2 Fax compatibility V.17 Transmission speed 14.4 kb/s Automatic step-down 12 kb/s, 9.6 kb/s, 7.2 kb/s, 4.8 kb/s Transmit/receive data modes MH, MR, MMR, all with or without ECM Binary Ţle transfer Yes Image width A3, A4, B4 Image resolution Normal (203 lines/in. x 98 lines/in., 203 lines/2.5 cm x 98 lines/2.5 cm) Fine (203 lines/in. x 196 lines/in., 203 lines/2.5 cm x 196 lines/2.5 cm) Conferencing Conference resources 9 Conference size 2 to 9 conferees Number of conferences Up to 3 Features Automatic gain control Dynamic create/destroy Dynamic add/delete Echo cancellation Coach/pupil mode DTMF volume control Tone clamping Active talker notiŢcation 3 ® Datasheet Dialogic DI/0408-LS Switching Board Technical Specifications (cont.) Approvals and Compliance Hazardous substances RoHS Compliance information at http://www.dialogic.com/rohs Safety and EMC CertiŢcations Canada ICES-003 Class A ULc CSA 950 File E96804 Europe** EN60950 EN55022 EN55024 Japan VCCI Class A United States FCC Part 15 Class A UL 1950 File E96804 International IEC60950 CISPR 22 CISPR 24 Telecom Approvals United States EBZUSA-43010-VM-T Canada IC:885 10992 A European Union DoC 01/10/2003 China LN: 13-2296-011544 Hong Kong ML 502054 Korea T-B41-01-1362 Malaysia TADJ/04A/0502/S Singapore PSTN2-0020-2002 Country-speciŢc approvals See the Product & Global Approvals list at http://www.dialogic.com/declarations/ or contact your Authorized Distributor Reliability/Warranty Estimated MTBF Per Telecordia Method I PCI: 101,000 hours Warranty Warranty information at http://www.dialogic.com/warranties DI/0408-LS Hardware Variants DI0408LSW United States, Canada, International approvals, equipped for use with external MSI-Global Power Module DI0408LSWEU EU approvals, equipped for use with external MSI-Global Power Module Hardware System Requirements • PC with processor compatible to a Pentium processor with full-size PCI card slots that are 32-bit, 33 MHz, and 3.3 V or 5 V signaling compatible ® ® • Additional system hardware requirements based on Windows NT or Windows 2000 operating system requirements • Additional system hardware requirements based on application requirements 4 ® Dialogic DI/0408-LS- Switching Board Datasheet Technical Specifications (cont.) Additional Components MSI-Global Power Module The MSI-Global Power Module generates –24 V and –70 V to power the DI station interface loop. One power module is required per DI board when station modules are used. The power module connects to a pre-wired power cable attached to the DI/0408-LS board. Connectors Input connector Standard North American AC input Output connector 6-pin female mini-DIN Internal fusing Not user replaceable Power Requirements Input voltage 90 VAC to 265 VAC, 47 Hz to 63 Hz Output voltage –24 VDC: 1.0 A –70 VDC: 300 mA Output ripple Less than 100 mV (peak-to-peak main) Percent regulation ± 2.5% for –24 V ± 7.5% for –70 V Operating temperature +32°F (0°C) to +122°F (+50°C) Dimensions Length: 6.5 in. (16.25 cm) Width: 3.75 in. (9.375 cm) Height: 2.17 in. (2.425 cm) Warranty Warranty information at http://www.dialogic.com/warranties Country-speciŢc approvals See the Product & Global Approvals list at http://www.dialogic.com/declarations/ or contact your Authorized Distributor Safety Certifications UL 1950 3rd edition File No: E148586 TUV EN60950 File No: B970624072005 CE CUL (CSA 950) File No: E160908 DENAN: PS-E MEL 080801-NC 4339 Telephone Interface Adapters and Cable Options The DI/0408-LS Breakout Kit includes three RJ-61 cables and an RJ-11 breakout box. The RJ-61 cables connect trunk and stations loops from the DI/0408-LS boards to the RJ-11 breakout box. The RJ-11 breakout box splits the RJ-61 leads into modular RJ-11 jacks for four individual loop start trunk interface inputs and eight individual analog station interface outputs. The RJ-61 Tri-Dongle Kit includes three RJ-61 cables equipped with a four-way RJ-11 splitter at one end. This kit can be used to break out trunks and stations from the DI/0408-LS boards to RJ-11 jacks. Ordering Information Product Code Order Code Description DI0408LSW 884-440 8-port Analog Station, PCI DI0408LSWEU 884-424 8-port Analog Station, PCI, Europe DI0408BOBKIT18W 886-402 DI/0408 Breakout Kit: Breakout panel to 12 RJ-11 jacks, 3 RJ-61 cables included DI0408CBLKITQ 885-062 RJ-61 Tri-Dongle Kit: RJ-61 cable with integrated RJ-11 (4 jack) splitter, 3 per kit 5 To learn more, visit our site on the World Wide Web at http://www.dialogic.com Dialogic Corporation 9800 Cavendish Blvd., 5th ţoor Montreal, Quebec CANADA H4M 2V9 INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH PRODUCTS OF DIALOGIC CORPORATION (“DIALOGIC”). NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN A SIGNED AGREEMENT BETWEEN YOU AND DIALOGIC, DIALOGIC ASSUMES NO LIABILITY WHATSOEVER, AND DIALOGIC DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF DIALOGIC® PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT OF A THIRD PARTY. Dialogic products are not intended for use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility applications. Dialogic may make changes to speciŢcations, product descriptions, and plans at any time, without notice. Dialogic is a registered trademark of Dialogic Corporation. Dialogic’s trademarks may be used publicly only with permission from Dialogic. Such permission may only be granted by Dialogic’s legal department located at the address given above. Any authorized use of Dialogic’s trademarks will be subject to full respect of the trademark guidelines published by Dialogic from time to time and any use of Dialogic’s trademarks requires proper acknowledgement. Windows is a registered trademark of the Microsoft Corporation in the United States and/or other countries. Other names of actual companies and products mentioned herein are the trademarks of their respective owners. Dialogic encourages all users of its products to procure all necessary intellectual property licenses required to implement their concepts or applications, which licenses may vary from country to country. None of the information provided in this datasheet other than what is listed under the section entitled Technical SpeciŢcations forms part of the speciŢcations of the product and any beneŢts speciŢed are not guaranteed. Positive Answering Machine Detection/Positive Voice Detection These performance results were measured using speciŢc computer systems and/or components within speciŢc lab environments and under speciŢc system conŢgurations. Any difference in system hardware, software design, or conŢguration may affect actual performance. The results are furnished for informational use only and should not be construed as a commitment by Dialogic. Dialogic assumes no responsibility or liability for any errors or inaccuracies. Outbound Dialing/Telemarketing Outbound dialing systems may be subject to certain laws or regulations. Dialogic makes no representation that Dialogic products will satisfy the requirements of any such laws or regulations (including, without limitation, any regulations dealing with telemarketing). **Approvals apply to DI0408LSWEU version only Copyright © 2007 Dialogic Corporation All rights reserved. 10/07 8484-06 www.dialogic.com