DIALOGIC D600JCT2E1120W

Datasheet JCT Media Boards ® Dialogic JCT Media Boards ® Dialogic JCT Media Boards can be used by developers to provide cost-effective, scalable, high-density communications applications. The applications include those requiring digital network interfaces as well as multimedia resources, such as voice and software-based speech recognition or fax in a single Personal Computer (PC) slot. These boards offer a rich set of advanced features and support Digital Signal Processor (DSP) technology, Continuous Speech Processing (CSP), and industry-standard PCI or PCI Express bus, and CT Bus technologies. Products Discussed in This Datasheet ® ® • Dialogic D/600JCT-1E1 Media Board • Dialogic D/480JCT-1T1 Media Board ® ® • Dialogic D/600JCT-2E1 Media Board • Dialogic D/480JCT-2T1 Media Board CSP technology — the DSP-based solution optimized for speech recognition — enables a friendly user interface and seamless integration of speech recognition software from leading speech technology vendors. CSP reduces system latency, increases recognition accuracy, and improves overall system response time for high-density speech solutions. Onboard DSP-based fax and support for software-based speech recognition lets developers maximize the number of boards in the system for multimedia communications applications, such as web-enabled call centers, voice portals, uniŢed messaging, or speech-enabled Interactive Voice Response (IVR). The option to use voice coders, such as Global System for Mobile Communications (GSM) and G.726, provides the capability to build uniŢed messaging solutions while extending ® existing legacy messaging systems. In addition, Dialogic Global Call Software facilitates global deployment to meet the growing needs of your business. Features Benefits 48 to 60 independent voice channels, and 24 to 48 T1 or 30 to Lower costs while creating larger high-density systems with 60 E1 network channels in a single PCI or PCI Express slot fewer boards per chassis Supports G.726 bit exact and GSM coders Enables implementation of uniŢed messaging applications that meet VPIM standards Silence-compressed recording Eliminates silence and preserves hard disk space ® UniŢed call control access through Dialogic Global Call Provides worldwide application portability and shortens Software interface development time by using the same API for almost any network protocol Separate models available with Universal PCI or PCI Express Universal PCI form factor compatible with 3.3 V and 5.0 V bus edge connector signals enabling deployment in a wide variety of PCI chassis from popular manufacturers; PCI Express form factor compatible with 1x slot (x1 or higher compatible) also available Supports DSP-based onboard fax and host-based speech Maximizes the number of boards in the system recognition on select boards (fax and host-based speech recognition are mutually exclusive) ® Datasheet Dialogic JCT Media Boards Technical Specifications D/480JCT-1T1 and D/480JCT-2T1 Number of ports 48 Maximum boards per system 10. Number may be limited by application, system performance, and the number of CT Bus loads per board CT Bus loads per board Approximately 4 Maximum CT Bus loads per system 20 Digital network interface Onboard DSX-1 interface Resource sharing bus H.100 CT Bus Control microprocessors 4 Intel486 GX processors Digital signal processor Freescale DSP56303 @ 100 MHz, with 128Kx24 private ® Supported operating systems Windows ; Linux. Details at http://www.dialogic.com/systemreleases CSP Yes Signaling Digital ISDN PRI (CAS) Host Interface — PCI Bus compatibility PCI. Complies with PCISIG Bus SpeciŢcation, Rev. 2.2 Bus speed 33 MHz maximum Bus mode 32- to 16-bit conversion in target mode Shared memory 4 × 64 KB page I/O ports None Support 3.3 V or 5 V signaling environment (universal connectivity) Platform — PCI Form factor PCI long card 12.3 in. (31.24 cm) long (without edge retainer) or 13.3 in. (33.78 cm) long (with edge retainer) 0.79 in. (2 cm) wide (total envelope) 3.87 in. (9.83 cm) high (excluding edge connector) Power Requirements — PCI +5 VDC 3.36 A typical; 4.03 A maximum +12 VDC 7.3 mA typical; 8.0 mA maximum –12 VDC Not required Host Interface — PCI Express Bus compatibility Complies with PCI-SIG PCI Express Base SpeciŢcation, Rev. 1.1 Bus speed 2.5 GHz maximum per direction Bus mode x1 lane conŢguration (x1 or higher compatible) Shared memory 32 KB to 64 KB page Interrupt level Message Signaled Interrupt (MSI) I/O ports None Platform — PCI Express Form factor PCI Express x1 lane conŢguration (or higher) 12.3 in. (31.24 cm) long (without edge retainer) or 13.3 in. (33.78 cm) long (with edge retainer) 0.79 in. (2 cm) wide (total envelope) 3.87 in. (9.83 cm) high (excluding edge connector) Power Requirements — PCI Express +3.3 VDC 1.12 A typical, 1.4 A maximum +12 VDC 800 mA typical, 900 mA maximum 2 ® Dialogic JCT Media Boards Datasheet Technical Specifications (cont.) Environmental Requirements — PCI and PCI Express Operating temperature +32°F (0°C) to +122°F (+50°C) Storage temperature -4°F (–20°C) to 158°F (+70°C) Humidity 8% to 80% noncondensing Telephone Interface Clock rate 1.544 Mb/s ±32 ppm Level 3.0 V (nominal) Pulse width 323.85 ns (nominal) Line impedance 100 Ohm ±10% Other electrical characteristics Complies with AT&T TR62411 and ANSI T1.403-1989 Framing SF (D3/D4) ESF for ISDN Line coding AMI AMI with B7 stufŢng B8ZS Clock and data recovery Complies with AT&T TR62411 and Telcordia TA-TSY-000170 Jitter tolerance Complies with AT&T TR62411 and ANSI T1.403-1989 Connectors RJ-48C Telephony bus connector H.100-style 68-pin Ţne pitch card edge connector Loopback Supports switch-selectable local analog loopback and software-selectable local digital loopback Approvals and Compliance Hazardous substances RoHS Compliance Information at http://www.dialogic.com/rohs Safety and EMC Canada ICES-003 Class A ULc CSA 60950-1 File E96804 Japan VCCI Class A United States FCC Part 15 Class A UL 60950-1 File E96804 Telecom Approvals Canada IC: 885 5959 A Japan D/480JCT-1T1: C00-0879JP/L00-0238 United States US:EBZUSA-20078-XD-N Country-speciŢc approvals See the Product Declarations & Global Approvals list at http://www.dialogic.com/declarations/ or contact your Authorized Distributor Reliability/Warranty Estimated MTBF Per Telcordia Method PCI: 154,000 hours PCI Express: 154,000 hours Warranty Warranty information at http://www.dialogic.com/warranties 3 ® Datasheet Dialogic JCT Media Boards Technical Specifications (cont.) D/600JCT-1E1 and D/600JCT-2E1 Number of ports 60 Maximum boards per system 10. Number may be limited by application, system performance, and the number of CT Bus loads per board CT Bus loads per board Approximately 4 Maximum CT Bus loads per system 20 Digital network interface Onboard E-1 interface Resource sharing bus H.100 CT Bus Control microprocessors 4 Intel486 GX processors Digital signal processor Freescale DSP56303 @ 100 MHz, with 128Kx24 private ® Supported operating systems Windows ; Linux. Details at http://www.dialogic.com/systemreleases CSP One E1 span only Signaling R2MF Host Interface — PCI Bus compatibility PCI. Complies with PCISIG Bus SpeciŢcation, Rev. 2.2 Bus speed 33 MHz maximum Bus mode 32- to 16-bit conversion in target mode Shared memory 4 × 64 KB page I/O ports None Support 3.3 V or 5 V signaling environment (universal connectivity) Platform — PCI Form factor PCI long card 12.3 in. (31.24 cm) long (without edge retainer) or 13.3 in. (33.78 cm) long (with edge retainer) 0.79 in. (2 cm) wide (total envelope) 3.87 in. (9.83 cm) high (excluding edge connector) Power Requirements — PCI +5 VDC 3.7 A typical; 4.3 A maximum +12 VDC 7.4 mA typical; 8.8 mA maximum –12 VDC Not required Environmental Requirements — PCI Operating temperature +32°F (0°C) to +122°F (+50°C) Storage temperature -4°F (–20°C) to 158°F (+70°C) Humidity 8% to 80% noncondensing Host Interface — PCI Express Bus compatibility Complies with PCI-SIG PCI Express Base SpeciŢcation, Rev. 1.1 Bus speed 2.5 GHz maximum per direction Bus mode x1 lane conŢguration (x1 or higher compatible) Shared memory 32 KB to 64 KB page Interrupt level Message Signaled Interrupt (MSI) I/O ports None Platform — PCI Express Form factor PCI Express x1 lane conŢguration (or higher) 12.3 in. (31.24 cm) long (without edge retainer) or 13.3 in. (33.78 cm) long (with edge retainer) 0.79 in. (2 cm) wide (total envelope) 3.87 in. (9.83 cm) high (excluding edge connector) 4 ® Dialogic JCT Media Boards Datasheet Technical Specifications (cont.) Power Requirements — PCI Express +3.3 VDC 1.12 A typical, 1.4 A maximum +12 VDC 800 mA typical, 900 mA maximum Environmental Requirements — PCI Express Operating temperature +32°F (0°C) to +122°F (+50°C) Storage temperature -4°F (–20°C) to 158°F (+70°C) Humidity 8% to 80% noncondensing Telephone Interface Network clock rate 2.048 Mb/s ±50 ppm Internal clock rate 2.048 Mb/s ±32 ppm Level 2.37 V (nominal) for 75 Ohm lines 3.0 V (nominal) for 120 Ohm lines Pulse width 244 ns (nominal) Line impedance 75 Ohm, unbalanced 120 Ohm, balanced Other electrical characteristics Complies with ITU-T Rec. G.703 Framing ITU-T G.704-1988 with CRC4 Line coding HDB3 Clock and data recovery Complies with ITU-T Rec. G.823-1988 Jitter tolerance Complies with ITU-T Rec. G.823, G.737, G.739, G.742-1988 Connectors BNC for 75 Ohm lines RJ-48C for 120 Ohm lines Telephony bus connector H.100-style 68-pin Ţne pitch card edge connector Loopback Supports switch-selectable local analog loopback and software-selectable local digital loop- back Approvals and Compliance Hazardous substances RoHS Compliance Information at http://www.dialogic.com/rohs Safety and EMC Europe EN60950 EN55022 EN55024 International IEC60950-1 CISPR 22 CISPR 24 Telecom Approvals Country-speciŢc approvals See the Product Declarations & Global Approvals list at http://www.dialogic.com/declarations/ or contact your Authorized Distributor Reliability/Warranty Estimated MTBF Per Telecordia Method 1 PCI: 154,000 hours PCI Express: 154,000 hours Warranty Warranty information at http://www.dialogic.com/warranties 5 ® Datasheet Dialogic JCT Media Boards Springware/JCT Technical Specifications Facsimile Fax compatibility ITU-T G3 compliant (T.4, T.30) ETSI NET/30 compliant Data rate 14,400 b/s (v.17) send 9600 b/s receive Variable speed selection Automatic step-down to 12,000 b/s, 9600 b/s, 7200 b/s, 4800 b/s, and lower Transmit data modes ModiŢed Huffman (MH) ModiŢed Read (MR) Receive data modes MH, MR File data formats Tagged Image File Format-Fax (TIFF-F) for transmit/receive MH and MR ASCII-to-fax conversion Host-PC-based conversion Direct transmission of text Ţles ® All Windows fonts supported Page headers generated automatically Error correction Detection, reporting, and correction of faulty scan lines Image widths 8.5 in. (21.6 cm) 10 in. (25.4 cm) 11.9 in. (30.23 cm) Image scaling Automatic horizontal and vertical scaling between page sizes Polling modes Normal Turnaround Image resolution Normal (203 pels/in. × 98 lines/in., 203 pels/2.5 cm × 98 lines/2.5 cm) Fine (203 pels/in. × 196 lines/in., 203 pels/2.5 cm × 196 lines/2.5 cm) Fill minimization Automatic Ţll bit insertion and stripping Audio Signal Receive range (T-1) –40 dBm0 to +2.5 dBm0 nominal, conŢgurable by parameter** (E-1) –43 dBm0 to +2.5 dBm0 nominal, conŢgurable by parameter** Automatic gain control Application can enable/disable Above –18 dBm0 (T-1) or –21 dBm0 (E-1) results in full-scale recording, conŢgurable by parameter** Silence detection –38 dBm0 nominal, software adjustable** Transmit level (weighted average) (T-1) –9 dBm0 nominal, conŢgurable by parameter** (E-1) –12.5 dBm0 nominal, conŢgurable by parameter** Transmit volume control 40 dB adjustment range, with application-deŢnable increments and legal limit cap Frequency Response 24 kb/s 300 Hz to 2600 Hz ±3 dB 32 kb/s 300 Hz to 3400 Hz ±3 dB 48 kb/s 300 Hz to 2600 Hz ±3 dB 64 kb/s 300 Hz to 3400 Hz ±3 dB 6 ® Dialogic JCT Media Boards Datasheet Springware/JCT Technical Specifications (cont.) Audio Digitizing 13 kb/s GSM @ 8 kHz sampling 24 kb/s OKI ADPCM @ 6 kHz sampling 32 kb/s OKI ADPCM @ 8 kHz sampling 32 kb/s G.726 @ 8 kHz sampling 48 kb/s A-law G.711 PCM @ 6 kHz sampling 48 kb/s µ-law G.711 PCM @ 6 kHz sampling 64 kb/s A-law G.711 PCM @ 8 kHz sampling 64 kb/s µ-law G.711 PCM @ 8 kHz sampling Digitization selection Selectable by application on function call-by-call basis Playback speed control Pitch controlled Available on OKI ADPCM and G.711 PCM Adjustment range: ±50% Adjustable through application or programmable DTMF control DTMF Tone Detection DTMF digits 0 to 9, *, #, A, B, C, D per ITU-T Q.23 Dynamic range –36 dBm0 to –3 dBm0 (T-1) or –39 dBm0 to 0 dBm0 (E-1) per tone, conŢgurable by parameter** Minimum tone duration 40 ms, can be increased with software conŢguration Interdigit timing Detects like digits with a >40 ms interdigit delay Detects different digits with a 0 ms interdigit delay Acceptable twist and frequency variation (T-1) Meets Telcordia LSSGR Sec 6 and EIA 464 requirements (E-1) Meets appropriate ITU-T speciŢcations** Noise tolerance Meets Telcordia LSSGR Sec 6 and EIA 464 requirements for Gaussian, impulse, and power line noise tolerance Cut-through (T-1) Local echo cancellation permits 100% detection with a >4.5 dB return loss line (E-1) Digital trunks use separate transmit and receive paths to network Performance dependent on far-end handset’s match to local analog loop Talk-off Detects less than 20 digits while monitoring Telcordia TR-TSY-000763 standard speech tapes (LSSGR requirements specify detecting no more than 470 total digits) Detects 0 digits while monitoring MITEL speech tape #CM 7291 Global Tone Detection Tone type Programmable for single or dual Maximum number of tones Application-dependent Frequency range Programmable within 300 Hz to 3500 Hz Maximum frequency deviation Programmable in 5 Hz increments Frequency resolution ±5 Hz. Separation of dual frequency tones is limited to 62.5 Hz at a signal-to-noise ratio of 20 dB. Timing Programmable cadence qualiŢer, in 10 ms increments Dynamic range (T-1) Programmable, default set at –36 dBm0 to –0 dBm0 (single tone), –3 dBm0 (dual tone) (E-1) Programmable, default set at –39 dBm0 to +0 dBm0 per tone Global Tone Generation Tone type Generate single or dual tones Frequency range Programmable within 200 Hz to 4000 Hz Frequency resolution 1 Hz Duration 10 ms increments Amplitude (T-1) –43 dBm0 to –3 dBm0 per tone nominal, programmable (E-1) –40 dBm0 to +0 dBm0 per tone nominal, programmable 7 ® Datasheet Dialogic JCT Media Boards Springware/JCT Technical Specifications (cont.) MF Signaling (T-1) R1 MF digits 0 to 9, KP, ST, ST1, ST2, ST3 per Telcordia LSSGR Sec 6, TR-NWT-000506 and ITU-T Q.321 Transmit level Complies with Telcordia LSSGR Sec 6, TR-NWT-000506 Signaling mechanism Complies with Telcordia LSSGR Sec 6, TR-NWT-000506 Dynamic range for detection –25 dBm0 to –3 dBm0 per tone Acceptable twist 6 dB Acceptable frequency variation Less than ±1 Hz MF Signaling (E-1) R2 MF digits All 15 forward and backward signal tones per ITU-T Q.441 Transmit level –8 dBm0 per tone, nominal, per ITU-T Q.454; programmable Signaling mechanism Supports the R2 compelled signaling cycle and non-compelled pulse requirements per ITU-T Q.457 and Q.442 Dynamic range for detection –35 dBm0 to –5 dBm0 per tone Acceptable twist 6 dB Acceptable frequency variation Less than ±1 Hz Call Progress Analysis Busy tone detection Default setting designed to detect 74 out of 76 unique busy/congestion tones used in 97 countries as speciŢed by ITU-T Rec. E., Suppl. #2 Default uses both frequency and cadence detection Application can select frequency only for faster detection in speciŢc environments Ring back detection Default setting designed to detect 83 out of 87 unique ring back tones used in 96 countries as speciŢed by ITU-T Rec. E., Suppl. #2 Uses both frequency and cadence detection Positive voice detection Standard Positive voice detection speed Detects voice in as little as 1/10th of a second Positive answering machine detection Standard Fax/modem detection Preprogrammed Intercept detection Detects entire sequence of the North American tri-tone Other intercept tone sequences can be programmed Dial tone detection Application enable/disable Supports up to three different user-deŢnable before dialing dial tones Programmable dial tone dropout debouncing Tone Dialing DTMF digits 0 to 9, *, #, A, B, C, D per Telcordia LSSGR Sec 6, TR-NWT-000506 Frequency variation Less than ±1 Hz Rate 10 digits/s, conŢgurable by parameter** Level –7.5 dBm0 per tone, nominal, conŢgurable by parameter** Pulse Dialing 10 digits 0 to 9 Pulsing rate 10 pulses/s, nominal, conŢgurable by parameter** Break ratio 60% nominal, conŢgurable by parameter** Analog Display Services Interface (ADSI) FSK generation per Telcordia TR-NWT-000030 CAS tone generation and DTMF detection per Telcordia TR-NWT-001273 8 ® Dialogic JCT Media Boards Datasheet Additional Components • Multidrop CT Bus cables – CBLCTB68C3DROP – CBLCTB68C4DROP – CBLCTB68C8DROP – CBLCTB68C12DROP – CBLCTB68C16DROP Ordering Information Product Code Order Code Description D480JCT2T1W 881-772 48-port Digital T1, PCI D480JCT1T1W 881-771 48-port Digital T1, PCI D600JCT2E1120W 881-778 60-port Digital E1, PCI D600JCT2E175W 881-779 60-port Digital E1, PCI D600JCT1E1120W 881-776 60-port Digital E1, PCI D600JCT1E175W 881-777 60-port Digital E1, PCI D480JCT2T1EW 884-589 48-port Digital T1, PCIe D480JCTT1EW 884-588 24-port Digital T1, PCIe D600JCT2E1120EW 884-592 60-port Digital E1, PCIe D600JCT2E175EW 884-593 60-port Digital E1, PCIe D600JCTE1120EW 884-590 30-port Digital E1, PCIe D600JCTE175EW 884-591 30-port Digital E1, PCIe 9 To learn more, visit our site on the World Wide Web at http://www.dialogic.com. Dialogic Corporation 9800 Cavendish Blvd., 5th ţoor Montreal, Quebec CANADA H4M 2V9 INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH PRODUCTS OF DIALOGIC CORPORATION (“DIALOGIC”). NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN A SIGNED AGREEMENT BETWEEN YOU AND DIALOGIC, DIALOGIC ASSUMES NO LIABILITY WHATSOEVER, AND DIALOGIC DISCLAIMS ANY EXPRESS OR IMPLIED ® WARRANTY, RELATING TO SALE AND/OR USE OF DIALOGIC PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT OF A THIRD PARTY. Dialogic products are not intended for use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility applications. Dialogic may make changes to speciŢcations, product descriptions, and plans at any time, without notice. Dialogic is a registered trademark of Dialogic Corporation. Dialogic’s trademarks may be used publicly only with permission from Dialogic. Such permission may only be granted by Dialogic’s legal department located at the address given above. Any authorized use of Dialogic’s trademarks will be subject to full respect of the trademark guidelines published by Dialogic from time to time and any use of Dialogic’s trademarks requires proper acknowledgement. Windows is a registered trademark of the Microsoft Corporation in the United States and/or other countries. Other names of actual companies and products men- tioned herein are the trademarks of their respective owners. Dialogic encourages all users of its products to procure all necessary intellectual property licenses required to implement their concepts or applications, which licenses may vary from country to country. None of the information provided in this datasheet other than what is listed under the section entitled Technical SpeciŢcations forms part of the speciŢcations of the product and any beneŢts speciŢed are not guaranteed. Positive Answering Machine Detection/Positive Voice Detection These performance results were measured using speciŢc computer systems and/or components within speciŢc lab environments and under speciŢc system conŢgu- rations. Any difference in system hardware, software design, or conŢguration may affect actual performance. The results are furnished for informational use only and should not be construed as a commitment by Dialogic. Dialogic assumes no responsibility or liability for any errors or inaccuracies. Outbound Dialing/Telemarketing Outbound dialing systems may be subject to certain laws or regulations. Dialogic makes no representation that Dialogic products will satisfy the requirements of any such laws or regulations (including, without limitation, any regulations dealing with telemarketing). **ConŢgurable to meet country-speciŢc PTT requirements. Actual speciŢcation may vary from country to country for approved products. Copyright © 2007 Dialogic Corporation All rights reserved. 10/07 7131-08 www.dialogic.com