Video | AUTODOME 7000 IP AUTODOME 7000 IP www.boschsecurity.com u Day/night IP camera with 28x or 36x optical zoom (12x digital zoom), Wide Dynamic Range (WDR), and Sodium Vapor White Balance mode that restores objects to their original color u New Intelligent Tracking and alarm rules engine with on-board Intelligent Video Analytics (IVA) u Enhanced system flexibility with dual recording options (iSCSI, SD card) u Fully configurable quad streaming with individually configurable SD streams, based on Bosch’s new Common Product Platform (CPP4) u Easy and intuitive installation with multiple pre- configured user modes that allow users to select the camera configuration that is ideal for their applications The AUTODOME 7000 IP is an easy to install, high- for outstanding clarity and image detail. The camera speed PTZ dome camera, in a field-proven housing also incorporates Wide Dynamic Range (WDR) suitable for indoor or outdoor installation, that technology that allows for the capture of clear images delivers unmatched picture quality and network from both bright and dark areas in the same frame. performance day and night. WDR ensures that bright areas are not saturated and The camera provides complete network-based control that dark areas are not too dark. of all dome functionality including pan/tilt/zoom Day/night capabilities and outstanding sensitivity make operation, presets, tours and alarms as well as web- the camera an exceptional performer in all lighting based configuration of all dome settings. It also conditions. In low light, the camera switches provides direct network video streaming using H.264 automatically from color to monochrome by removing compression / bandwidth throttling to efficiently the IR filter to boost the infrared illumination manage bandwidth and storage requirements while sensitivity, while maintaining superior image quality. delivering outstanding image quality. For operation in the darkest conditions, the SensUp control feature automatically reduces the shutter Functions speed to as little as one second. This increases sensitivity by more than 50 times. High-performance PTZ day/night camera Progressive scan The camera has a 1/4-in. CCD sensor, with 4CIF/D1 The camera is ideally suited for IP imaging resolution and sensitivity to below 1.0 lux, and is applications. The progressive scan technology in the available with a choice of 28x and the industry-leading camera provides smooth and clear images when 36x optical zoom lens. Both camera options have a full viewing images from the camera. 12x digital zoom and provide D1 horizontal resolution 2 | AUTODOME 7000 IP Sodium vapor lamp white balance The AUTODOME comes with Bosch’s Intelligent Video The camera is an exceptional performer when Analysis (IVA) built-in. IVA is state-of-the-art intelligent capturing video under a sodium vapor lamp (a street video analysis that reliably detects, and analyzes lamp or tunnel lamp, for example). Images under these moving objects while suppressing unwanted alarms conditions may have a yellowish tint, which may make from spurious sources in the image. identification difficult. In the Sodium Vapor White The IVA functionality built into the AUTODOME is able Balance mode, the camera automatically compensates to detect idle and removed objects as well as loitering, for the light from a sodium vapor lamp to restore multiple line crossing, and trajectories. IVA also objects to their original color. supports BEV (Bird’s Eye View) People counting. Assisted Self Calibration and configurable detection Virtual masking filters improve reliability and reduce operator work The camera offers Virtual Masking, which gives users load. flexibility to mask parts of the scene which should not be considered for flow analysis to trigger Intelligent AUTODOME 7000 PTZ drive and mechanism Tracking. This allows users to mask background The AUTODOME 7000 supports 256 pre-positions and motion in the scene such as moving trees, pulsating two styles of Guard Tours: Preset and Record/ lights, busy roads, etc. Playback. Users can configure the preset standard tour with as many as 256 sequential pre-positions, with a Intelligent Tracking configurable dwell time between pre-positions. The The camera utilizes the built-in Intelligent Video AUTODOME Series also provides support for two Analytics (IVA) to follow an individual or an object recorded tours, which are recorded macros of an continuously. Objects detected by IVA when the operator’s movements, including pan, tilt, and zoom camera is in a stationary position activate the activities, and can be played back with the click of a Intelligent Tracking feature, which controls the pan/ button. tilt/zoom actions of the camera to keep the tracked Pan and tilt preset repeatability are accurate to within object in the scene. ±0.1 degrees to ensure that the correct scene is The new Intelligent Tracking is based on robust flow captured every time. The camera delivers variable pan/ detection algorithms which can reliably track moving tilt speeds from a crawl speed of only 0.1 degrees per objects even under challenging scenes. second to a full 400 degrees per second. The camera The tracking and detection reliability can be enhanced is capable of pan speeds of 400 degrees per second further with virtual masking for scenes with a lot of and tilt speeds of 300 degrees per second between background motion such as trees or other objects prepositions. The camera provides a tilt angle 18 creating constant motion in the scene. degrees above the horizon, and a pan range of up to The camera supports three modes for Intelligent 360 degrees continuous rotation. Tracking: The AutoScaling (proportional zoom) and AutoPivot Auto mode: When configured in this mode, the camera (automatically rotates and flips the camera) features actively analyzes the video to detect any moving ensure optimal control. object. If it detects movement, it begins to track the object. This mode is most useful for scenarios where Five (5) pre-programmed user modes normally no motion is expected. Five pre-programmed but configurable user modes, One Click mode: In this mode, users can click an optimized with the best settings for a variety of typical object moving in the live video image to enable the applications, make camera programming on-site easy camera to track the movement of the selected object. and user-friendly. Users select from the menu the This mode is most useful for scenarios where normal mode that best defines the environment in which the scene activity is expected. camera is installed: • Outdoor – general day-to-night changes with sun IVA-triggered mode: In this mode, the camera highlights and street lighting continuously analyzes the scene for IVA alarms or IVA • Indoor – general day-to-night changes without sun rule violations. If an IVA rule is violated, it triggers the highlights and street lighting advanced tracking feature of the camera to start • Low light –optimized for sufficient details at low light following the object / person that triggered the alarm. • Motion – monitoring traffic or fast moving objects; This unique combination of robust IVA and Intelligent motion artifacts are minimized Tracking allows the camera to track moving objects of • Vibrant – enhanced contrast color reproduction and interest without getting distracted by other moving sharpness objects in the scene. Users have the ability to customize these modes, if Intelligence necessary, for the specific requirements of the site. With built-in video content analysis, the AUTODOME reinforces the Intelligence-at-the-Edge concept where edge devices become increasingly intelligent. 3 | AUTODOME 7000 IP Superior privacy masking Indoor/outdoor pendant housings are rated to provide The camera provides 24 individual, easy to configure IP66 protection and offer an operating temperature privacy masks, with up to 8 displayed in the same range down to -40 °C (-40 °F). The indoor/outdoor scene. As the camera is zoomed, each mask changes pendant comes fully assembled with a sunshield and size smoothly and quickly, ensuring that the covered ready for wall or pipe applications with the proper object cannot be seen in most cases. mounting hardware (sold separately). In addition, the camera models with pendant housing come equipped Comprehensive streaming capabilities on Bosch’s with a low-impact, high-resolution acrylic bubble for Common Product Platform (CPP4) The camera has an advanced, efficient H.264 encoder enhanced image clarity. You can easily convert the (CPP4) embedded for DVD-quality streaming video outdoor pendant for indoor applications by removing and very efficient streaming and network capabilities. the sunshield. Bosch offers a full complement of hardware and The new platform supports simultaneous streaming of individually configurable SD streams (H.264 and M- accessories (sold separately) for wall, corner, mast, JPEG), and allows a choice of SD resolution. roof, pipe mount, and in-ceiling applications, which allow the camera to be adapted easily to individual Recording and storage management site requirements. A memory card (SD (Secure Digital), SDHC (Secure Digital High Capacity), or SDXC (Secure Digital Video management system support eXtended Capacity)) can be used for local alarm The camera ships with Bosch Video Client (BVC), an recording or for scheduled local recording to improve easy-to-use software from Bosch that is suitable for the overall recording reliability. Recording midsize installations. For large enterprise systems, management can be controlled by the Bosch Video AUTODOME cameras can be used with Bosch Video Recording Manager (VRM), or the camera can use Management System (BVMS), which allows enhanced iSCSI targets directly without any recording software. video management and viewing capabilities. In addition, the camera is supported/integrated into all Advanced networking capabilities of the leading third party video management systems. The AUTODOME offers advanced capabilities so you can configure the camera to take advantage of the ONVIF conformant latest networking technology. The AUTODOME Series conforms to the ONVIF Profile The AUTODOME offers Quality of Service (QoS) S specification allowing easy integration with the configuration options to ensure fast network response conformant devices and VMS. to PTZ data and images. Quality of Service (QoS) is For more information about ONVIF, visit the set of techniques to manage network resources. www.onvif.org. QoS manages the delay, delay variation (jitter), The camera conforms to the ONVIF (Open Network bandwidth, and packet loss parameters to guarantee Video Interface Forum) specification which guarantees the ability of a network to deliver predictable results. interoperability between network video products QoS identifies the type of data in a data packet and regardless of manufacturer. ONVIF conformant devices divides the packets into traffic classes that can be are able to exchange live video, audio, metadata and prioritized for forwarding. control information. They are automatically discovered The AUTODOME also supports the IPv6 internet-layer and connected to network applications such as video protocol for packet-switched internetworking across management systems. multiple IP networks. IPv6 uses 128-bit addresses Fiber Optic Kit (IPv4 uses 32-bit addressing), which allows for many Bosch offers the optional VG4-SFPSCKT, a unique more devices and users on the internet as well as media converter module for use with AUTODOME extra flexibility in allocating addresses and efficiency cameras. This media converter module is designed to for routing traffic. accept a wide-range of 10/100 Mbps SFP modules for use with Multimode or Singlemode optical fiber with Ease of installation and servicing The camera has been designed for quick and easy LC or SC connectors. installation; a key feature from Bosch CCTV products. The media converter module along with the SFP All housings feature recessed screws and latches for module is user-installed directly into the camera‘s increased tamper resistance. power supply box to provide an integrated fiber optic AUTODOME in-ceiling housings provide IP54 solution. protection. With an optional, impact-resistant, rugged Unsurpassed reliability polycarbonate bubble (sold separately), they are rated As with all Bosch products, the AUTODOME Series has IK 8 (IEC 62262) to protect the camera from been subjected to the industry’s most comprehensive vandalism. The rugged bubble can withstand impacts and demanding battery of endurance tests such as equivalent to a 4.5 kg (10 lb) weight dropped from a HALT (highly accelerated life testing) to make sure it height of 3 m (10 ft). will hold up through years of use. And of course, it comes with Bosch’s industry-leading 3-year warranty. 4 | AUTODOME 7000 IP Access security Outdoor Pendant Access security Quantity Item Various security levels are available for accessing the 1 AUTODOME 7000 Pendant camera with clear acrylic network, the camera, and the data channels. As well bubble and sunshield as password protection with three levels, 802.1x authentication using a RADIUS (Remote Authentication 1 Product DVD (which includes complete Operation Manual) Dial In User Service) server is supported. To secure 1 Packet of printed Safety literature Web browser access, use HTTPS with a SSL certificate stored in the camera. For total data protection, the Notes: video and audio communication channels can be • The pendant can be converted to an indoor pendant independently AES encrypted with 128-bit keys by by removing the sunshield. installing the optional encryption site license. • Mounting hardware and accessories are available separately. Easy upgrade Remotely upgrade the camera whenever new firmware Technical specifications becomes available. This ensures up-to-date products, thus protecting investment with little effort. Camera 36x Day/Night Imager 1/4 in.-type Exview HAD CCD (progressive Certifications and approvals scan) Electromagnetic Complies with FCC Part 15, ICES-003, and CE Effective Picture PAL: Approx. 440,000; 752(H) x 582(V) Compatibility (EMC) regulations, including EN50130-4, EN55022 Elements NTSC: Approx. 380,000; 768 (H) x 494 (V) Class A, EN61000-3-3, EN61000-6-1, and EN61000-6-2 Lens 36x Zoom (3.4–122.4 mm) F1.6 to F4.5 Product Safety Complies with CE regulations, UL, CSA, EN, Focus Automatic with manual override and IEC Standards Iris Automatic with manual override EN60950-1 Environmental In-ceiling: IP54, Plenum rated (with acrylic Zoom Movement Speed NTSC PAL bubble) • Optical WIDE / Optical TELE – 4.0 sec. 4.0 sec. Also: IK8 rating when using optional Focus Tracking ON Polycarbonate bubble, sold separately Indoor/Outdoor Pendant: IP66, NEMA 4X • Optical WIDE / Optical TELE – 2.7 sec. 2.7 sec. Focus Tracking OFF ONVIF conformance EN 50132-5-2 • Optical WIDE / Digital TELE 6.0 sec. 6.2 sec. Notice • Digital WIDE / Digital TELE 2.1 sec. 2.3 sec. Conformity to EN 50130-4 Optical Zoom Field of View 1.7° to 57.8° One of the following power supply units is (FOV) required to conform to the EN 50130-4 standard: VG4-A-PSU0, VG4-A-PSU1, VG4-A-PSU2, VG4-A- Minimum Working Distance 320 mm (wide) to 1500 mm (tele) PA0, VG4-A-PA1, or VG4-A-PA2. Gain Control Auto/Manual/Max. (–3 dB to 28 dB, 2 dB steps) Parts included Synchronization Line-Lock (–120° to 120° vertical In-ceiling phase adjust) or internal crystal Quantity Item Aperture Correction Horizontal and vertical 1 AUTODOME 7000 In-Ceiling camera with acrylic bubble Digital Zoom 12x and white trim ring 1 Sensitivity (typical) 30 IRE 50 IRE 1 Interface box Day Mode 1 Optional black trim ring SensUp Off 0.66 lux 1.4 lux 1 Ceiling gasket (for IP54 conformance) (NTSC: 1/60s (0.061 fc) (0.13 fc) PAL: 1/50s) Product DVD (which includes complete Operation Manual) SensUp On 0.04 lux 0.1 lux Packet of printed Safety literature (NTSC: 1/4s, 15X; (0.0037 fc) (0.0092 fc) PAL 1/3s, 16.7X) Night Mode 5 | AUTODOME 7000 IP SensUp Off 0.104 lux 0.209 lux SensUp On 0.02 lux 0.04 lux (0.0097 fc) (0.0194 fc) (NTSC: 1/4s, 15X; (0.002 fc) (0.004 fc) PAL 1/3s, 16.7X) SensUp On 0.0052 lux 0.0103 lux (NTSC: 1/4s, 15X; (0.0005 fc) (0.001 fc) Night Mode PAL 1/3s, 16.7X) SensUp Off 0.066 lux 0.166 lux Electronic Shutter Speed NTSC: 1/4 to 1/10,000 sec., 20 (0.006 fc) (0.015 fc) steps SensUp On 0.0026 lux 0.0082 lux PAL: 1/3 to 1/10,000 sec., 20 (NTSC: 1/4s, 15X; (0.0002 fc) (0.0008 fc) steps PAL 1/3s, 16.7X) Wide Dynamic Range (WDR) 92 dB (50 dB with WDR Off) Electronic Shutter Speed NTSC: 1/4 to 1/10,000 sec., 20 Signal-to-Noise Ratio (SNR) >50 dB (Weighting ON) steps PAL: 1/3 to 1/10,000 sec., 20 White Balance 2000 K to 10,000 K steps 1. Unless otherwise stated, test conditions are: F1.6; shutter = NTSC 1/60s, PAL 1/50s; max AGC; no bubble. Clear Wide Dynamic Range (WDR) 92 dB (50 dB with WDR Off) bubble adds 0.09 f-stop loss (90% light transmission). Tinted bubble adds 0.47 f-stop loss (60% light transmission). Signal-to-Noise Ratio (SNR) >50 dB (Weighting ON) Camera 28x Day/Night White Balance 2000 K to 10,000 K Imager 1/4 in.-type Exview HAD CCD (progressive 2. Unless otherwise stated, test conditions are: F1.6; shutter = NTSC 1/60s, PAL 1/50s; max AGC; no bubble. Clear scan) bubble adds 0.09 f-stop loss (90% light transmission). Tinted bubble adds 0.47 f-stop loss (60% light transmission). Effective Picture PAL: Approx. 440,000; 752(H) x 582(V) Mechanical Elements NTSC: Approx. 380,000; 768 (H) x 494 (V) Lens 28x Zoom (3.5–98.0 mm) F1.35 to F3.7 In-Ceiling Pendant Focus Automatic with manual override Pan Range 360° cont. 360° cont. Iris Automatic with manual override Tilt Angle 1° above horizon 18° above horizon Zoom Movement Speed NTSC PAL Pre-position Speed Pan: 400°/s Pan: 400°/s Tilt: 300°/s Tilt: 300°/s • Optical WIDE / Optical TELE – 2.5 sec. 2.5 sec Focus Tracking ON Pan/Tilt Modes • Optical WIDE / Optical TELE – 1.7 sec. 1.7 sec. • Turbo Mode Pan: 0.1°/s – 400°/s Focus Tracking OFF (Manual Control) Tilt: 0.1°/s – 300°/s • Optical WIDE / Digital TELE – 4.5 sec. 4.9 sec. • Normal Mode 0.1°/s-120°/s 0.1°/s-120°/s Focus Tracking ON Preset ± 0.1° typ. ± 0.1° typ. • Optical WIDE / Digital TELE – 1.7 sec. 1.7 sec. Accuracy Focus Tracking OFF Electrical • Digital WIDE / Digital TELE 2.0 sec. 2.5 sec. In-Ceiling Pendant Optical Zoom Field of View 2.1° to 55.8° (FOV) Input Voltage 21-30 VAC , 21-30 VAC, 50/60 Hz 50/60 Hz or High PoE Minimum Working Distance 300 mm (wide) to 1500 mm (tele) High PoE or PoE+ (IEEE Gain Control Auto/Manual/Max. 802.3at, class 4 (–3 dB to 28 dB, 2 dB steps) standard) Synchronization Line-Lock (-120° to +120° vertical Power Consumption, 24 W / 44 VA 60 W / 69 VA (heaters phase adjust) or internal crystal typical on) or Aperture Correction Horizontal and vertical 3 24 W / 44 VA Digital Zoom 12x (heaters off) 2 3. Without heater connected in power supply box for indoor applications. Sensitivity (typical) 30 IRE 50 IRE Day Mode SensUp Off 0.33 lux 0.66 lux (0.031 fc) (0.061 fc) 6 | AUTODOME 7000 IP Surge Suppression Protocols IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, Protection on Peak current 17 A, peak power 300 W ARP, DHCP, SNTP, SNMP (V1, MIB II), 802.1x, Alarm Inputs (8/20 μs) DNS, DNSv6, DDNS (DynDNS.org, selfHOST.de, no-ip.com), SMTP, iSCSI, UPnP (SSDP), Protection on Peak current 2 A, peak power 300 W DiffServ (QoS), LLDP, SOAP, Dropbox, CHAP, Alarm Outputs (8/20 μs) digest authentication Protection on Peak current 7.3 A, peak power 600 W Advanced IPv6, QoS Relay Output (10/1000 μs) Networking Protection on Power Peak current 7.3 A, peak power 600 W Audio Input (Dome) (10/1000 μs) • Standard G.711, 8 kHz sampling rate Protection on Power Peak current 21.4 A, peak power 1500 W L16, 16 kHz sampling rate Output (Arm Power (10/1000 μs) AAC, 16 kHz sampling rate Supply) • Signal-to- >50 dB 10/100 Ethernet Peak current 14 A, peak power 200 W Noise Ratio Data Lines (8/20 μs) • Audio Bidirectional (full duplex) Software Control Streaming Camera Setup/ Via web browser (such as Internet Explorer Local Storage Control version 7.0 or later), Bosch Configuration Manager, Bosch Video Management System Memory Card Slot User-supplied SD/SDHC/SDXC memory card (BVMS), or Bosch Video Client (BVC) (maximum 2TB – SDXC) Software Update Network firmware upload Recording Continuous recording of video and audio Network Fiber Optic Kit Video H.264 (ISO/IEC 14496‑10), M‑JPEG VG4-SFPSCKT compression 5 Description Fiber Optic Ethernet Media Converter kit . Encoding / Streaming Requires a small form-factor pluggable (SFP) module (sold separately). H.264 MJPEG Data Interface Ethernet Scenario Data Rate 10/100 Mbps Stream 1 Stream 2 Stream 3 Stream 4 IEEE 802.3 Compliant Full Duplex or Half Duplex Electrical Port 1 4CIF@30ips 4CIF@30ips I-frame 4CIF@30ips Full Duplex Optical Port only from Stream 1 Compatible Receiver CNFE2MC 2 4CIF@30ips Copy of I-frame 4CIF@30ips Installation Installed inside a VG4-A-PA0, VG4-A-PA1, Stream 1 only from VG4-A-PA2, VG4‑A‑PSU1, or a VG4‑A‑PSU2 Stream 1 power supply box with supplied mounting hardware 3 Downscaled Downscaled I-frame Downscaled stream stream only from stream from 5. Kit available separately and must be installed inside the AUTODOME power supply box. Stream 1 Stream 1 GOP Structure IP, IBP, IBBP SFP Modules Data Rate 9.6 kbps to10 Mbps (per stream) Description Interchangeable modules available for use with MMF or SMF optical fiber. Overall IP Delay 240 ms Data Interface Ethernet Resolution (Horizontal x Vertical, PAL/NTSC) Data Rate 10/100 Mbps • 4CIF/D1 704 x 576/480 (25/30 ips, or 50/60 fields/s IEEE 802.3 Compliant for interlaced fields) Mechanical • CIF 352 x 288/240 (25/30 ips, or 50/60 fields/s for interlaced fields) Dimensions (LxWxH) Ethernet 10-Base T/100 Base-TX, auto-sensing, half/full • SFP-2 and SFP-3 55.5 x 13.5 x 8.5 mm (2.2 x 0.5 x 0.3 in.) duplex, RJ45 • SFP-25, SFP-26 63.8 x 13.5 x 8.5 mm (2.5 x 0.5 x 0.3 in.) 7 | AUTODOME 7000 IP Weight (all SFP 0.23 kg (.05 lb) Alarm Outputs (4) 1 dry contact relay; 3 open collector/ modules) transistor outputs 32 VDC @ 150 ma max. Type Connector Wavelength Max. Distance (transmit / Audio 1 x mono line in, 1 x mono line out receive) • Signal line in 12 kOhm typical, 1 Vrms max SFP-2 MMF Duplex LC 1310 nm / 2 km • Signal line out 1 Vrms at 1.5 kOhm, typical 1310 nm (1.2 miles) SFP-3 SMF Duplex LC 1310 nm / 20 km Environmental 1310 nm (12.4 miles) In-Ceiling Pendant SFP-25 MMF Single SC 1310 nm / 2 km 7 1550 nm (1.2 miles) Ingress IP54, Plenum rated IP66 Protection NEMA 4X for: SFP-26 MMF Single SC 1550 nm / 2 km Rating/ • Access to Hazardous parts 1310 nm (1.2 miles) Standard • Ingress of solid foreign objects (falling dirt, Fiber Compatibility circulating dust, settling dust) • Ingress of water (dripping and light splashing, Optical Fiber 50/125 µm MMF. For 50/125 µm fiber, hosedown and splashing) Compatibility, MMF subtract 4 dB from the specified optical • Corrosive agents budget value. Must meet or exceed fiber standard ITU-T G.651. Operating -10°C to 40°C -40°C to 55°C Temp. (14°F to 104°F) (-40°F to 131°F) Optical Fiber 8–10/125 µm SMF. Must meet or exceed or Compatibility, SMF fiber standard ITU-T G.652. -10°C to 55°C 6 (14°F to 131°F) Optical Distance Specified transmission distances are limited to Specifications the optical loss of the fiber and any additional Storage -40°C to 60°C -40°C to 60°C loss introduced by connectors, splices, and Temp. (-40°F to 140°F) (-40°F to 140°F) patch panels. The modules are designed to operate over the entire optical loss budget Humidity 0% to 90% relative, non- 0% to 100% relative, range, so they do not require a minimum loss condensing condensing in order to operate. 6. Without heater connected in power supply box for indoor applications. 7. Meets requirements for NEMA 4X certification with use of a polycarbonate bubble. Miscellaneous Meets requirements for NEMA 4X, except impact test, with use of an acrylic bubble. Sectors/Titling 16 independent sectors with a 20-character title/sector Construction Masking 24 individually configurable privacy masks Dimensions See dimensional drawings Pre-positions 256, each with a 20-character title Weight Guard Tours Two (2) types of tours: • In-ceiling 2.58 kg (5.69 lb) • Recorded tours – two (2) • Indoor/Outdoor 3.06 kg (6.75 lb) • Preset tour – one (1), consisting of up to 256 scenes, consecutively Pendant Supported English, Chinese, Dutch, French, German, Bubble Size 153.1 mm diameter (6.03 in.) Languages Italian, Japanese, Polish, Portuguese, and Construction Material Spanish • Housing In-ceiling: Magnesium User Connections Pendant: Cast aluminum Power, Camera RJ-45 10/100 Base-TX Ethernet (High • Bubble In-ceiling: High-resolution acrylic, rugged Power-over-Ethernet (High PoE)) or PoE+ polycarbonate, or HD high-resolution (IEEE 802.3at, class 4 standard) acrylic 21-30 VAC, 50/60 Hz Pendant: High-resolution acrylic or rugged polycarbonate Power, Heater RJ-45 10/100 Base-TX Ethernet (High Power-over-Ethernet (High PoE)) Standard Color White (RAL 9003) 21-30 VAC, 50/60 Hz Standard Finish Powder coated, sand finish Video and Control RJ-45 10/100 Base-TX Ethernet Alarm Inputs (7) 2 supervised; 5 non-supervised Programmable for “normally open” or "normally closed" 8 | AUTODOME 7000 IP Mounts/Accessories Outdoor Power Supply Box (120/230 VAC VG4-A-PSU1 / Transformer) VG4-A-PSU2 Bubbles Fiber Optic Kit VG4-SFPSCKT In-ceiling Dimensional Drawings Clear high-resolution acrylic VGA-BUBBLE-CCLA (Included with in-ceiling PAL camera models.) Tinted high-resolution acrylic VGA-BUBBLE-CTIA (Included with in-ceiling NTSC camera models.) Clear rugged polycarbonate VGA-BUBBLE-CCLR Tinted rugged polycarbonate VGA-BUBBLE-CTIR Clear HD high-resolution acrylic VGA-BUBHD-CCLA Tinted HD high-resolution acrylic VGA-BUBHD-CTIA Pendant Clear high-resolution acrylic VGA-BUBBLE-PCLA (Included with pendant camera models.) AUTODOME 7000 – Slot for SD card Tinted high-resolution acrylic VGA-BUBBLE-PTIA 1 Slot for SD card Clear rugged polycarbonate VGA-BUBBLE-PCLR Tinted rugged polycarbonate VGA-BUBBLE-PTIR 22.86 86.7 [0.90] [3.42] Pendant Arm Mounts Wall Arm (No Transformer) VG4-A-PA0 299.4 Wall Arm (120/230 VAC Transformer) VG4-A-PA1 / [11.79] VG4-A-PA2 Pendant Arm with Wiring VGA-PEND-ARM 189.0 [7.44] R 76.6 Mounting plate for VGA-PEND-ARM VGA-PEND-WPLATE [3.01] 224.0 [8.82] 188.0 Trim skirt for VG4 Series Power Supplies VG4-A-TSKIRT 549.6 [7.40] 169.9 [21.64] [6.69] 532.1 158.0 [20.95] Optional Mounting Plates for Arm Mounts [6.22] 469.1 11.0 [18.47] [0.43] Corner Mounting Plate VG4-A-9542 60.0 Mast (Pole) Mounting Plate VG4-A-9541 [6.30] 366.9 Pendant Pipe Mounts [14.44] 201.2 [7.92] Pipe Mount Cap VG4-A-9543 86.1 216.4 [7.33] [8.52] 233.0 [9.17] Pendant Roof Mounts R 76.6 [3.01] 189.0 134.6 [7.44] mm [5.30] Roof (Parapet) Mount VGA-ROOF-MOUNT 224.0 [in.] [8.82] (VG4-A-9543 Pipe Mount Cap required. Available separately.) AUTODOME 7000 Dimensions – Pendant, Pipe Optional Mounting Plates for Roof Mounts 1 Power supply box and 4 Power supply box Flat Roof Adapter for Parapet Mount LTC 9230/01 sunshield In-ceiling Support Kits 2 Sunshield removed 5 Trim skirt 3 Mounting plate Bracket for suspended or drop ceilings VGA-IC-SP Power Supplies High PoE Midspan 60W, single port, AC in NPD-6001A Outdoor Power Supply Box, no transformer VG4-A-PSU0 9 | AUTODOME 7000 IP ø 175.99 AUTODOME 7000 IP 36x Indoor/Outdoor Pendant NTSC [6.929] with Clear Bubble Order number VG5-7036-E2PC4 Accessories 206.89 VG4-A-PSU0 24 VAC Power Supply Unit [8.145] 24 VAC, 100 W, white, for an AutoDome Series camera Order number VG4-A-PSU0 21.29 [0.838] VG4-A-PSU1 120 VAC Power Supply Unit 120 VAC, 100 W, white, for an AutoDome Series 95.88 99.76 camera [3.775] [3.928] HD IP Order number VG4-A-PSU1 74.65 [2.939] ø 204.49 VG4-A-PSU2 230 VAC Power Supply Unit HD [8.051] mm 230 VAC, 100 W, white, for an AutoDome Series 78.04 [3.072] [in.] IP camera Order number VG4-A-PSU2 AUTODOME 7000 Dimensions – In-ceiling VG4-A-PA0 Pendant Arm Mount 88.9 Pendant arm mount with power supply box for a 3.50 58 2.3 AutoDome Series cameras, no transformer, white 6.35 Typ. 175 88.9 0.25 6.9 Order number VG4-A-PA0 3.50 111 Typ. 5 10.2 4.37 Ø 10.4 0.40 0.41 193 254 7.6 10.00 VG4-A-PA1 Pendant Arm Mount with 120 VAC Trans- 16.0 Typ. 0.63 279.4 152.4 11.00 6.0 former 1-1/2 NPT 378 1190.8 69.9 14.88 Pendant arm mount with power supply box for 46.88 2.75 38 6.35 1.5 0.25 AutoDome Series cameras with a 120 VAC 170.0 133.4 133.4 6.69 616 5.25 11.0 5.25 24.25 178 04.3 134.6 6 7.0 transformer, white 5.30 101.6 Typ. Order number VG4-A-PA1 4.0 160.0 203 216.4 8.0 236 346.2 6.30 8.52 9.3 13.63 10.4 8 x 0.41 219.1 mm 114.3 8.63 976.1 50.8 VG4-A-PA2 Pendant Arm Mount with 230 VAC Trans- in. 4.50 Typ. 2.00 228.6 38.43 88.1 9.0 3.47 1022.4 105.0 279.4 former 4.13 40.25 11.0 Pendant arm mount with power supply box for AUTODOME Dimensions - Mounts AutoDome Series cameras with a 230 VAC transformer, white 1 Mast Mount 4 Roof Mount Order number VG4-A-PA2 2 Corner Mount 5 Roof Mount Adapter VGA-PEND-ARM Pendant Arm with Wiring 3 Pipe Mount 6 Power Supply for Pipe and Compatible with an AutoDome Series pendant housing Roof Mounts Order number VGA-PEND-ARM Ordering information VGA-PEND-WPLATE Mounting Plate Mounting plate for VGA-PEND-ARM, compatible with AUTODOME 7000 IP 28x In-ceiling PAL with Clear Bub- ble an AutoDome Series camera Order number VGA-PEND-WPLATE Order number VG5-7028-C1PC4 VGA-ROOF-MOUNT Roof Mount AUTODOME 7000 IP 28x In-ceiling NTSC with Tinted Roof parapet mount, white Bubble (VG4-A-9543 Pipe Mount Cap required. Available Order number VG5-7028-C2PT4 separately.) AUTODOME 7000 IP 28x Indoor/Outdoor Pendant PAL Order number VGA-ROOF-MOUNT with Clear Bubble LTC 9230/01 Flat Roof Mount Adapter Order number VG5-7028-E1PC4 For mounting a unit in an upright position on a flat AUTODOME 7000 IP 28x Indoor/Outdoor Pendant NTSC surface for roof parapet mount VGA-ROOF-MOUNT with Clear Bubble Order number LTC 9230/01 Order number VG5-7028-E2PC4 AUTODOME 7000 IP 36x Indoor/Outdoor Pendant PAL with Clear Bubble Order number VG5-7036-E1PC4 10 | AUTODOME 7000 IP VG4-A-9541 Pole Mount Adapter VGA-BUBBLE-PTIR Tinted Rugged Bubble for a Pendant Pole mount adapter for a for an AutoDome Series Housing pendant arm or a VEI-30 or NEI-30 Dinion Infrared Impact resistant polycarbonate bubble Imager, designed for poles with a diameter of Order number VGA-BUBBLE-PTIR 100‑380 mm (4‑15 in.), white VGA-BUBBLE-PCLA Clear High-resolution Bubble for a Order number VG4-A-9541 Pendant Housing VG4-A-9542 Corner Mount Adapter Low-impact acrylic bubble Corner mount adapter for an AutoDome Series Order number VGA-BUBBLE-PCLA pendant arm or a VEI-30 or NEI-30 Dinion Infrared VGA-BUBBLE-PTIA Tinted High-resolution Bubble for a Imager Pendant Housing Order number VG4-A-9542 Low-impact acrylic bubble VG4-A-9543 Pipe Mount Order number VGA-BUBBLE-PTIA Pipe mount, white, for an AutoDome Series pendant VGA-BUBHD-CCLA Clear HD High-Resolution Acrylic housing Bubble for In-Ceiling AUTODOME cameras Order number VG4-A-9543 Order number VGA-BUBHD-CCLA VGA-IC-SP In-ceiling Support Kit for Various Bosch VGA-BUBHD-CTIA Tinted HD High-Resolution Acrylic Dome Cameras Bubble for In-Ceiling AUTODOME cameras Suspended ceiling support kit for various families of Order number VGA-BUBHD-CTIA Bosch dome cameras Order number VGA-IC-SP NPD-6001A High PoE Midspan 60W, single port, AC in High Power, 60 W Single Port PoE Midspan with AC in VGA-SBOX-COVER Cover for AutoDome Power Supply Order number NPD-6001A Boxes Order number VGA-SBOX-COVER VG4‑SFPSCKT Fiber Optic Ethernet Media Converter Kit Ethernet media converter video transmitter/data VG4-A-TSKIRT Trim Skirt for AutoDome Power Supply receiver fiber optic kit Boxes Order number VG4-SFPSCKT Trim skirt for the following AutoDome Series power supply boxes: VG4-A-PSU0, VG4-A-PSU1, and VG4-A-PSU2 Order number VG4-A-TSKIRT VGA-BUBBLE-CCLR Clear Rugged Bubble for an In-ceil- ing Housing Impact resistant polycarbonate bubble Order number VGA-BUBBLE-CCLR VGA-BUBBLE-CTIR Tinted Rugged Bubble for an In-ceil- ing Housing Impact resistant polycarbonate bubble Order number VGA-BUBBLE-CTIR VGA-BUBBLE-CCLA Clear High-resolution Bubble for an In-ceiling Housing Low-impact acrylic bubble Order number VGA-BUBBLE-CCLA VGA-BUBBLE-CTIA Tinted High-resolution Bubble for an In-ceiling Housing Low-impact acrylic bubble Order number VGA-BUBBLE-CTIA VGA-BUBBLE-PCLR Clear Rugged Bubble for a Pendant Housing Impact resistant polycarbonate bubble Order number VGA-BUBBLE-PCLR 11 | AUTODOME 7000 IP Represented by: Americas: Europe, Middle East, Africa: Asia-Pacific: China: America Latina: Bosch Security Systems, Inc. Bosch Security Systems B.V. Robert Bosch (SEA) Pte Ltd, Security Bosch (Shanghai) Security Systems Ltd. Robert Bosch Ltda Security Systems Division 130 Perinton Parkway P.O. Box 80002 Systems 201 Building, No. 333 Fuquan Road Via Anhanguera, Km 98 Fairport, New York, 14450, USA 5617 BA Eindhoven, The Netherlands 11 Bishan Street 21 North IBP CEP 13065-900 Phone: +1 800 289 0096 Phone: + 31 40 2577 284 Singapore 573943 Changning District, Shanghai Campinas, Sao Paulo, Brazil Fax: +1 585 223 9180 Fax: +31 40 2577 330 Phone: +65 6571 2808 200335 China Phone: +55 19 2103 2860 security.sales@us.bosch.com emea.securitysystems@bosch.com Fax: +65 6571 2699 Phone +86 21 22181111 Fax: +55 19 2103 2862 www.boschsecurity.us www.boschsecurity.com apr.securitysystems@bosch.com Fax: +86 21 22182398 al.securitysystems@bosch.com www.boschsecurity.asia www.boschsecurity.com.cn www.boschsecurity.com © Bosch Security Systems 2013 | Data subject to change without notice 8369443723 | en, V8, 05. Jun 2013