ASTEC SA45-3129
Specifications
Cable/connector
DC cable with 2.5mm center plug, barrel type DC plug center +Ve; DC plug outer -Ve
Current limit
± 5% @ constant current mode
Efficiency
>80% @ full load, 115VAC (DC Conversion)
EMI/RFI
EN55022 Curve B, FCC Part 15, Subpart B Class B.
Frequency
47 - 63 Hz
Hold-up time
5 ms. typical at full load @ 115VAC
Input current
1.2A rms @ 90 VAC; 0.5A @ 264VAC
Input range
90 - 264 VAC (wide range)
Maximum Power (Po)
45W
MTBF
>100,000 hours at full load and 25°C ambient conditions
Output Voltage (Vo)
16V, 18V or 24V
Output Voltage regulation
± 5% @ constant voltage mode
Over Voltage Protection (OVP)
AC recycle
Short circuit protection
Output short circuit (
Temperature
Operating:0°C to +40°C ambient; Storage:-10°C to +70°C
Features
- Built in EMI filter (CISPR 22 Class B)
- CE Mark
- Constant voltage/current
- Fully regulated output
- High efficiency
- High MTBF
- IEC320 AC receptacle, 2 pin (type C8)
- IEC801-2, -4, -5
- Miniature size
- Overload and short circuit protection
- Universal AC input
Datasheet
Extracted Text
SA45-312x 45 Watts SA45-312x • Adaptor Series Total Power 45 Watts Input Voltages 90 - 264 VAC # of Outputs Single Product may vary slightly from photo. Electrical Specifications Special Features • CE Mark Input • Universal AC input Input range .......................... 90 - 264 VAC (wide range) • Miniature size Frequency ............................ 47 - 63 Hz • Fully regulated output Input current ......................... 1.2A rms @ 90 VAC; 0.5A @ 264VAC • Overload and short circuit protection Efficiency ............................. >80% @ full load, 115VAC (DC Conver- • Constant voltage/current sion) • High efficiency EMI/RFI ................................ EN55022 Curve B, FCC Part 15, • High MTBF Subpart B Class B. • IEC320 AC receptacle, 2 pin (type C8) • Built in EMI filter (CISPR 22 Class B) Output • IEC801-2, -4, -5 Voltage (Vo) ......................... 16V, 18V or 24V Voltage regulation ............... ± 5% @ constant voltage mode Current limit ......................... ± 5% @ constant current mode Maximum Power (Po)........... 45W Environmental Hold-up time ........................ 5 ms. typical at full load @ 115VAC Operating temperature: Protection ............................. Over Voltage Protection (OVP), AC 0°C to +40°C ambient recycle Short circuit protection: output short Storage temperature: circuit (<0.03 ohm), auto recovery -10°C to +70°C Cable/connector .................. DC cable with 2.5mm center plug, barrel type DC plug center +Ve; DC plug MTBF: >100,000 hours at full load and 25°C outer -Ve ambient conditions Safety SA45-3123 SA45-3124 SA45-3129 UL 1950 E132002 E132002 E132002 CSA 22.2 No.234 LR53982C LR53982C LR53982C ERG-GS (GS/77.00) /0408/9703 /0284/9610 /0265/9608 NEMKO P97100686 P97100686 P96102693 P96102291 MITI 91-53393 91-53577 91-53577 CB 3501 3006 2853 IEC 950 EN 60950 / with Nordic deviation CE EMC & LVD 46 Europe (UK): +44 (0)1384-842211 France: +33 (0)1 4305 8680 Germany: +49 (0)6621 50570 NEW PC Series PC Series SA45-312x • Adaptor Series 60.0 ASTEC STANDARD POWER EUROPE ASTEC FRANCE S.A.R.L. ASTEC STANDARD POWER GERMANY Astec House, Waterfront Business Park 424 La Closerie, Mont D’est Robert-Heil-Str. 8 Merry Hill, Dudley 93194 Noisy Le Grand 36251 Bad Hersfeld West Midlands, DY5 1LX, UK France Germany Telephone: +44 (0)1384 842211 Telephone: +33 (0)1 4305 8680 Telephone: +49 (0)6621 50570 Facsimile: +44 (0)1384 8433558 Facsimile: +33 (0)1 4304 6033 Facsimile: +49 (0)6621 505720 Ordering Information 2 Model Power Vo CV/CC Io min Io max Ripple OVP max 1 Max P/P (PARD) SA45-3123 45W 16V CV/CC 0 A 2.8 A 160 mV 22.6V SA45-3124 45W 18V CV only 0 A 2.5 A 180 mV 26.0V SA45-3129 45W 24V CV/CC 0 A 1.87 A 240 mV 32.0V 1. Peak-to-peak with 20 MHz bandwidth and 10 μF in parallel with a 0.1 μF capacitor. 2. CV - Constant Voltage CC - Constant Current DIMENSIONS 25.4 106.5 R350 110 REF. NOTES 1. Specification subject to change without notice. 2. All dimensions are in inches (mm). 3. Warranty: 1 year 4. Weight: 0.56 lb / 0.25 Kg Power Fax +1 760-930-0881 Doc No: 1125 • REV 22.4.98 47
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the SA45-3129?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods