ARCOM AIM104-386EX-R5
Specifications
Form Factor
PC/104
BIOS
Embedded Datalight BIOS (Millennium compliant)
Comms Ports
3 x RS232; 1 x RS485
Connectors
50-way IDC header; 10-way header for TTL I/O
Datalight
ROM-DOS pre-installed
Event Timer
Fixed 500msec clock
Memory
1MB SRAM; 1MB Flash
MTBF
155,000 hrs
Operating temp.
-40 to +75°C
PC/104 form factor
96mm (3.8 in) high by 90mm (3.5 in) wide
PC/104 interface
16-bit PC/104 (IEEE996) bus
Power requirements
500mA @ + 5V (150mA in power-down mode)
Processor
i386EX embedded processor
Intel i386EX
RTC
Dallas DS1302
Watchdog Timer
Power-up start-up or software trigger
Features
- 16-bit PC/104 expansion interface
- 1MB Flash memory - including Flash filing system
- 1MB SRAM (off-board battery-backed)
- 3 x RS232 ports; 1 x non-isolated RS485 port
- 50-way ribbon cable header for serial I/O; 10-way TTL I/O header
- Enhanced 5V monitor/reset
- Extended temperature 33MHz i386EX CPU, configured for PC-compatibility
- One user-assigned jumper link input, and two LED outputs
- Real-Time Clock (off-board battery-backed); Event timer/Watchdog timer
- ROM-DOS operating system and Arcom Flash Filing System (AFFS) - both supplied pre-installed in Flash
Datasheet
Extracted Text
386EX PC/104 Single Board Computer The AIM104-386EX is a low cost PC/104 format single board computer, based on the Intel 386EX embedded processor. The module includes 1Mbyte of onboard SRAM (which can be battery- backed from an off board source), plus 1Mbyte of factory-fitted Flash memory (supplied with ROMDOS and Flash Filing system software), four serial ports and a real time clock. Datalight's ROM-DOS is a low-cost 'workalike' of MS-DOS 6.22, with extra features for the embedded environment. The PC/104 format is an industrial form factor measuring 3.8” x 3.5” (96mm x 90mm). Features 3 year product warranty Extended temperature 33MHz i386EX CPU, configured for PC-compatibility 1MB SRAM (off-board battery-backed) 1MB Flash memory - including Flash filing system ROM-DOS operating system and Arcom Flash Filing System (AFFS) - both supplied pre-installed in Flash 3 x RS232 ports; 1 x non-isolated RS485 port 16-bit PC/104 expansion interface Real-Time Clock (off-board battery-backed); Event timer/Watchdog timer Enhanced 5V monitor/reset 50-way ribbon cable header for serial I/O; 10-way TTL I/O header One user-assigned jumper link input, and two LED outputs Driver utilities disks Specification Processor i386EX embedded processor Operating System Datalight ROM-DOS pre-installed Memory 1MB SRAM; 1MB Flash BIOS Embedded Datalight BIOS (Millennium compliant) PC/104 form factor 96mm (3.8 in) high by 90mm (3.5 in) wide PC/104 interface 16-bit PC/104 (IEEE996) bus Connectors 50-way IDC header; 10-way header for TTL I/O Comms Ports 3 x RS232; 1 x RS485 RTC Dallas DS1302 Watchdog Timer Power-up start-up or software trigger Event Timer Fixed 500msec clock MTBF 155,000 hrs Power requirements 500mA @ + 5V (150mA in power-down mode) Software ‘C’ example code Operating temp. -40 to +75°C Standard peripheral I/O ports on the module include a 16-bit PC/104 interface; a 50-way right-angle ribbon header for serial I/O and battery connections; and a 10-way header for TTL I/O (eg keypad). Onboard peripheral functions include four serial comms ports - configured as three RS232 ports (two 16450 and one 16550), plus one non-isolated RS485 port (16550). The maximum supported rate is 115Kbaud. The AIM104-386EX also includes a 10-way header for TTL I/O for connection to simple push-button keypads or alpha-numeric displays. For time and date, AIM104-386EX has a Dallas DS1302 Real-Time Clock, which can be backed-up by an off-board battery (typically 1µA at 3.6V). RTC operation under ROM-DOS is Y2K-compliant. The on-board 500millisec event timer is used to interrupt power-down mode. It can trigger periodic recovery from power-down mode, allowing a low average current consumption. The onboard programmable watchdog timer is used for general reset. System reset will occur if the watchdog timer is allowed to time-out. The time-out period is set to 6 seconds. An enhanced 5V monitor/reset circuit provides full power-down and brown-out protection. A user-assigned jumper link provides a simple level of configuration for the application software. The utility disks, supplied with the module, includes ‘C’ library routines for setting-up and controlling the module for users who prefer not to use the ROM-DOS environment. Ordering Information AIM104-386EX AIM104-386EX-R5
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the AIM104-386EX-R5?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods