Manufacturers
ADVANTECH PCL-731
Description
Advantech PCL-731 48-bit digital I/O card
Part Number
PCL-731
Price
Request Quote
Manufacturer
ADVANTECH
Lead Time
Request Quote
Category
I/O Module
Specifications
Connectors
2x50-pin male ribbon-cable connectors
Dimensions
185 mm (L) x 100 mm (H) (7.3" x 3.9")
I/O lines
48
Interrupt
Bit 0 of one port can generate an interrupt to IRQ 2~15
Interrupt triggering
Rising or falling edge triggering, jumperselectable
Operating humidity
5 ~ 95% RH non-condensing (refer to IEC 68-2-3)
Operating temperature
0 ~ +60° C (32 ~ 140° F)
Power consumption
+5 V @ 0.5 A typical +5 V @ 0.8 A max.
Programming mode
8255 PPI mode 0
Storage temperature
-20 ~ +70° C (-4 ~ 158° F)
Features
- 48 digital I/O lines
- Buffered circuits for higher driving capacity than the 8255
- Emulates 8255 PPI mode 0
- Interrupt handling
- Output status readback
- Pin compatible with Opto-22 I/O module racks
Datasheet
Extracted Text
PCL-731 48-bit Digital I/O Card Features • 48 digital I/O lines • Emulates 8255 PPI mode 0 • Buffered circuits for higher driving capacity than the 8255 • Interrupt handling • Output status readback • Pin compatible with Opto-22 I/O module racks Introduction The PCL-731 offers 48 programmable digital I/O lines. Each port General emulates the operation of an 8255 Programmable Peripheral • Power consumption:+5 V @ 0.5 A typical Interface (PPI) chip in mode 0, but provides a higher driving capacity +5 V @ 0.8 A max. than the 8255. • Operating temperature: 0 ~ +60° C (32 ~ 140° F) The card's DIO ports are combined into 8-bit ports, six for the • Storage temperature: -20 ~ +70° C (-4 ~ 158° F) PCL-731. You can configure each port individually by software for 7 either input or output. The card can directly interface with SSR • Operating humidity: 5 ~ 95% RH non-condensing (refer to IEC module carrier boards through a 50-pin Opto-22 compatible 68-2-3) connector. • Connectors: 2x50-pin male ribbon-cable connectors The PCL-731 is a low-cost alternative of the PCL-722. Like the • Dimensions: 185 mm (L) x 100 mm (H) (7.3" x 3.9") PCL-722 it provides a readback feature which lets you monitor the status of the output by reading back the output port directly. Pin Assignments PC 7 1 2 GND PC 6 3 4 GND Applications PC 5 5 6 GND PC 4 7 8 GND PC 3 9 10 GND PC 2 11 12 GND • Digital I/O control PC 1 13 14 GND PC 0 15 16 GND 17 18 GND PB 7 • Industrial monitoring and control 19 20 GND PB 6 21 GND PB 5 22 23 GND PB 4 24 25 GND • Interfacing with parallel I/O devices PB 3 26 GND PB 2 27 28 PB 1 29 30 GND PB 0 31 32 GND • Interfacing with Opto-22 compatible I/O module racks PA 7 33 34 GND PA 6 35 36 GND PA 5 37 38 GND PA 4 39 40 GND PA 3 41 42 GND PA 2 43 44 GND Specifications PA 1 45 46 GND PA 0 47 48 GND +5 V 49 50 GND • I/O lines: 48 Ordering Information • Programming mode: 8255 PPI mode 0 PCL-731: 48-bit digital I/O card and manual • Interrupt: Bit 0 of one port can generate an interrupt to IRQ 2~15 PCL-10150-1.2: 50-pin flat cable, 1.2 m • Interrupt triggering: Rising or falling edge triggering, jumper- PCLD-782B: 24/16-ch. opto-isolated digital input board selectable PCLD-785B: 24/16-ch. relay output board • Digital output: Logic 0: 0.4 V max. @ 24 mA (sink) PCLD-7216: 16-ch. carrier board for SSR I/O modules Logic 1: 2.4 V min. @ 15 mA (source) PCLD-885: 16-ch. power relay (Form A) output board • Digital input: Logic 0: 0.4 V max. PCLS-OCX: ActiveX Control for data acquisition and control. Logic 1: 2.4 V min. ADAM-3950: 50-pin flat cable wiring terminal for DIN-rail mounting DA&C Series www.advantech.com 7-39 Plug-in Data Acquisition and Control
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the PCL-731?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Advantech ADAM-5000E I/O Module. 8-slot Distributed DA&C System for RS-485 Networks
Advantech ADAM-5450 REV.A1 RTD Module - 6-ch RTD Module with Modbus
Advantech ADAM-5550KW CPU Board - 8-slot Programmable Automation Controller
Advantech ADAM-6150EI - ADAM-6100 Series 15-ch Isolated Digital I/O EtherNet/IP Module
Advantech ADAM-6151EI - ADAMN-6100 Series 16-ch Isolated Digital Input EtherNet/IP Module
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods