Introduction and ADAM-5000/TCP System Feature Features: • 10/100 Base-T Auto-negotiation high speed communication port • Support Modbus/TCP Communication Protocol for easy integration • Up to 100m communication distance w/o repeater • Allowed remote configuration via Ethernet • Allowed 8 host PCs Access concurrently • 8 I/O slots for up to 128 points data monitoring and control isolation for Ethernet Communication • 1500 V DC • System status diagnostic with LED indicators • Built-in Watchdog Timer for system auto-reset • ARM 32-bit RISC CPU • Windows Utility - I/O modules configuration and calibration - Network auto-searching - Local Control functions - Current status monitoring and latch output Introduction Undoubtedly, Ethernet is becoming to a big trend of industrial application. Longer communication distance, higher communication speed, and more advantages attract people developing their system based on this network. For fitting user's requirement, Advantech announces the new DA&C system, ADAM-5000/TCP, the Ethernet I/O Modbus/TCP Protocol solution for people developing their eAutomation architecture. Modbus/TCP is one of the most popular standard for industrial Ethernet network. Following this communication protocol, ADAM-5000/TCP Communication Network is easy to integrate with any HMI software packages or user develop Adopting by 32-bit RISC CPU, ADAM-5000/TCP has greatly advanced applications which support Modbus. Users do not have to prepare a the ability in data processing, especially for network communication. specific driver for ADAM-5000/TCP when they install the DA&C system There is a standard RJ-45 modular jack Ethernet port on ADAM-5000/ with their own operating application. It will certainly reduce engineer TCP's CPU board, and the field signals of I/O modules would be able effort. Moreover, ADAM-5000/TCP works as an Modbus data server. It to link to Ethernet directly without any other converter or data gateway. allows eight PCs or tasks to access its current data concurrently, no The communication speed can be auto-switched between 10M and matter connecting from LAN, intranet, or internet. 100Mbps data transfer rate depends on network environment. Hardware Capacity & Diagnostic Communicating Isolation ADAM-5000/TCP is designed with high I/O capacity and supports all High speed transient suppressors isolate ADAM-5000/TCP Ethernet types of ADAM-5000 I/O modules. Providing 8 slots for any mixed port from dangerous voltage up to 1500 V power spikes and avoid modules, this DA&C system handles up to 128 I/O points (only four DC surge damage to whole system. ADAM-5024 allowed). Different from other main units, ADAM-5000/ TCP not only has higher I/O capacity, but it also has smarter diagnostic ability. There are eight indicators on the front case of the CPU module. Users can read the system status clearly, includes power, CPU, Ethernet link, communication collision, communication rate, etc. In addition, there are also Tx and Rx LEDs on the Ethernet port, indicating data transferring and receiving. ADAM-5000/TCP Distributed DA&C System based on Ethernet ADAM-5000/TCP devices on the network Software Architecture Modbus/TCP OPC without configuration. Server Basing on Modbus standard, the ADAM- There are also some advanced functions, such 5000/TCP firmware is built-in Modbus/TCP As we know, OPC is a data exchange tool in as the scaling function, helps users converting server. Therefore, Advantech provides DLL worldwide. Almost each Hardware and various field signals to engineer units; and driver, OPC Server, and Windows Utility for software venders support this standard. And latch output function, forces a data or status user to client data from ADAM-5000/TCP. Modbus/TCP OPC Server is design for as system simulation. Moreover, Windows Users can configure this DA&C system via connecting with Modbus devices on Ethernet. Utility is designed with security concept. If Windows Utility; integrate with HMI software It acquires data from ADAM-5000/TCP, then you assigned the configuring authority to a package via Modbus/TCP driver or Modbus/ links with OPC Client from HMI. So any HMI specific password, no other one would be TCP OPC Server. Even more, you can use software package is possible and easy to allowed to change the configuration. DLL drive to develop your own applications. integrate with ADAM Ethernet solution. Windows Utility For system configuration, Windows Utility offers a friendly operating environment to calibrate I/O modules, monitor current data, set IP address etc. As you execute this program, it will automatically search each ADAM-5000/TCP Specification System Communication Mechanical • CPU: 32-bit RISC CPU • Ethernet: 10/100 Base T • Case: KJW with captive mounting hardware • Memory: 4 MB RAM • Wiring: UTP, category 5 or greater 512 KB Flash ROM for user's AP • Plug-in Screw Terminal Block: • Bus Connection: RJ45 modular jack Accepts 0.5 mm 2 to 2.5 mm 2 , 1 - #12 • Operating System: Real-time OS • Comm. Protocol: Modbus/TCP, TCP, or 2 - #14 to #22 AWG • I/O Capacity: 8 slots (four ADAM-5024 UDP, IP, ARP allowed) • Data Transfer Rate: Up to 100 Mbps Environment • Status Indicator: Power (3.3V, 5V), CPU, • Max Communication Distance: 100 • Operating Temperature: - 10° to 70°C Communication(Link, Active, 10/100 (14° to 158°F) meters W/O repeater Mbps, Tx, Rx) • Even Response Time: <5 ms • Storage Temperature: - 25° to 85°C • CPU Power Consumption: 5.0 W (-13° to 185°F) Power Requirements • Reset Push Bottom: Yes • Humidity: 5% to 95%, non-condensing • Unregulated 10 to 30 V DC Isolation • Protection: Over-voltage and power Order Information • Ethernet Communication: 1500 V DC reversal � � � � � ADAM-5000/TCP • I/O Module: 3000 V DC Distributed DA&C System based on Software Support • Comm. Power: 3000 V Ethernet DC Diagnostic • Windows Utility: Network setting, I/O configuration & • Power-up Self Test: Hardware and calibration, Local control functions Software • Modbus/TCP OPC Server ADAM-5013 3-channel RTD Input Module ADAM-5017 8-channel Analog Input Module ADAM-5017H 8-channel High Speed Analog Input Module ADAM-5013 ADAM-5017 ADAM-5017H 3-Channel RTD Input 8-Channel Analog Input 8-Channel High Speed Module Module Analog Input Module • Channels: 3 • Channels: 8 differential • Channels: 8 differential • Effective resolution: 16-bit • Effective resolution: 16-bit • Effective resolution: 12-bit plus sign bit • lnput type: PT100 or Ni RTD • lnput type: mV, V, mA • Input type: mV, V, mA • RTD types and temperature ranges • lnput range: • Input range: ±250 mV, ±500 mV, IEC RTD 100 ohms ±150 mV, ±500 mV, ±1 V, ±5 V, ±1 V, ±5 V, ±10 V, 0 ~ +250 mV, ±10 V; ±20 mA 0 ~ +500 mV, 0 ~ +1 V, 0 ~ +5 V, Pt -100° C to +100° C α=0.00385 0 ~ +10 V, 0 ~ 20 mA, 4 ~ 20 mA Pt 0° C to +100° C α=0.00385 • Isolation voltage: 3000 VDC Pt 0° C to +200° C α=0.00385 • Isolation voltage: 3000 VDC • Fault and overvoltage protection: Pt 0° C to +600° C α=0.00385 withstands overvoltage up to ±35 V • Sampling rate: various according to base JIS RTD 100 ohms unit • Sampling rate: 10 samples/sec. (total) ADAM-5000/485&5000/MOD&5000E Pt -100° C to +100° C α=0.00392 • Input impedance: 2 MΩ 1000 samples/sec: one ADAM-5017H Pt 0° C to +100° C α=0.00392 installed, 2's complement format Pt 0° C to +200° C α=0.00392 • Bandwidth: 13.1 Hz @ 50 Hz, 15.72 Hz @ 600 samples/sec: one ADAM-5017H Pt 0° C to +600° C α=0.00392 60 Hz installed, engineering format Ni RTD • Accuracy: ±0.1% or better ADAM-5510 & ADAM-5511 Ni -80° C to +100° C • Zero drift: ±1.5 mV/ ° C 8000 samples/sec max: Ni 0° C to +100° C one ADAM-5017H installed • Span drift: ±25 PPM/ ° C • Isolation voltage: 3000 VDC • Input impedance: • CMR @ 50/60 Hz: 92 dB min. • Sampling rate: 10 samples/sec. (total) 20 MΩ (voltage inputs) • Power consumption: 1 W (typical); • Input impedance: 2 MΩ 125 Ω (current inputs) 1.25 W (max) • Bandwidth: 1000 Hz • Bandwidth: 13.1 Hz @ 50 Hz, 15.72 Hz • Analog Signal Range: ±15 V max. @60 Hz • Signal input bandwidth: 1 kHz for both Note: The voltage difference between any voltage and current inputs • Input connections: 2, 3 or 4 wire two pins must not exceed ±15 V. • Accuracy: ±0.1% or better • Accuracy: ±0.1 % or better • Zero drift: ±0.015° C/ ° C • CMR @ 50/60 Hz: 92 dB min • Power consumption:1.75 W (typical); • Span drift: ±0.01° C/ °C 2.2 W (max) • CMR @ 50/60 Hz: 150 dB • Distinct range settings allowed on each • NMR @ 50/60 Hz: 100 dB channel • Power consumption:0.85 W (typical); Note: The voltage difference between any 1.1 W (max) two pins must not exceed ±15 V. ADAM 5000 Series ADAM-5018 7-channel Thermocouple Input Module ADAM-5024 4-channel Analog Output Module ADAM-5050 16-channel Universal Digital I/O Module ADAM-5018 ADAM-5024 ADAM-5050 7-Channel Thermocouple 4-Channel Analog 16-Channel Universal Input Module Output Module Digital I/O Module • Channels: 7 differential • Channels: 4 • Channels: 16 • Effective resolution: 16-bit • Effective resolution: 12-bit • I/O Type: bit-wise selectable by DIP switch • lnput type: mV, V, mA, Thermocouple • Output type: mA, V • Digital input: • lnput range: • Output range: Dry Contact: ±15 mV, ±50 mV, ±100 mV, 0 ~ 20 mA, 4 ~ 20 mA, 0 ~10 V Logic level 0: Close to GND ±500 mV, ±1 V, ±2.5 V, ±20 mA • Isolation voltage: 3000 VDC Logic level 1: Open • T/C type and temperature range: • Accuracy: ° Wet Contact: J 0 ~ 760 C ±0.1% of FSR for current output ° K 0 ~ 1370 C Logic level 0: +2 V Max ±0.2% of FSR for voltage output ° T -100 ~ 400 C ° Logic level 1: +4 V to +30 V • Resolution: ±0.015% of FSR E 0 ~ 1000 C ° R 500 ~ 1750 C • Digital output: • Zero drift: ° S 500 ~ 1750 C Voltage output: ±30 mV/ ° C Open Collector to 30 V, ° B 500 ~ 1800 C Current output: ±0.2 mA/ ° C 100 mA and 450 mW max. load • Isolation voltage: 3000 VDC • Span temperature coefficient: • Power consumption:0.35 W (typcal); ±25 PPM/ ° C • Fault and overvoltage protection: 1.2 W (max) withstands overvoltage up to ±35 V • Programmable output slope: 0.125 ~ 128.0 mA/sec.; • Sampling rate: 10 samples/sec. (total) 0.0625 ~ 64.0 V/sec. • Input Impedance: 2 MΩ • Current load resistor: • Bandwidth: 13.1 Hz @ 50 Hz, 15.72 Hz @ 0 ~ 500 Ω (source) 60 Hz • Power consumption: 1.4 W (typical); • Accuracy: ±0.1% or better 2.9 W (max) • Zero drift: ±0.3 mV/ ° C • Span drift: ±25 PPM/ ° C • CMR @ 50/60 Hz: 92 dB min • Power consumption:0.5 W (tpical); 0.63 W (max) ADAM 5000 Series ADAM-5068 8-channel Relay Output Module ADAM-5080 4-channel Counter/Frequency Module ADAM-5090 4-port RS-232 Module ADAM-5068 ADAM-5080 ADAM-5090 8-channel Relay Output 4-channel Counter/ 4-port RS-232 Module • Ports: 4 serial ports Module Frequency Module • Data bits: 5, 6, 7, 8 • Channels: 8, form A • Channels: 4 • Stop bits: 1, 1.5, 2 • Contact rating: • Maximum count: 4,294,967,285 (32 bit) AC: 120 V @ 0.5 A; • Parity: None, even, old • Input frequency: DC: 30 V @ 1 A 0.3 ~ 1000 Hz max. (frequency mode) • UARTs: 1 x 16C954 (128-byte FIFO) • Breakdown voltage: 5000 Hz max. (counter mode) • Speed: 50 ~ 115.2 Kbps 500 VAC (50/60 Hz) • Input level: Isolated or TTL level • Data signals: T x D, R x D, RTS, CTS, • Relay on time (typical): 7 msec. • Minimum pulse width: DTR, DSR, DCD, RI, GND • Relay off time (typical): 3 msec. 500μ sec. (Frequency mode) • Connector: RJ-45 100μ sec. (Counter mode) • Total switching time: 10 msec. • LED display: TX, RX • Minimum input current: 2 mA (Isolated) • Insulation resistance: • Power consumption: 0.6 W (max) 1000 MW minimum at 500 VDC • Isolation input level: • Supports ADAM-5510, ADAM-5511 only max • Power consumption:0.25 W (typical); Logic level 0: +1 V 1.8 W(max) Logic level 1: +3.5 V to 30 V • TTL input level: Logic level 0: 0 V to 0.8 V Logic level 1: 2.3 V to 5 V • Isolation voltage: 1000 VRMS • Mode: Counter (Up/Down, Bi-direction) Frequency • Counter Aux. function: Initial preset, Hi-Low alarm setting, alarm digital output Mapping, Overflag • Programmable digital noise filter: 8 ~ 65000 Msec • Power consumption:1.3 W (Typical); 1.5 W (max) ADAM 5000 Series Available Soon