OC-3 Multiplexer OPTI-3 Single OC-3 to Three DS3s Product Features Service providers are continually challenged The unit requires only a fraction of the to provide cost-effective DS3 service off footprint normally needed for optical deploy- � One GR-253 compliant OC-3 SONET rings and point-to-point. Some ments. The space-saving OPTI-3 occupies port, three DS3 ports common types of deployment are to cell standard slots in either a small two rack unit � 1+1 optical and 1:1 electrical ® sites and customer premises. The ADTRAN high wallmount chassis (WMC) or one rack protection, 1+1 SONET TM OPTI-3 sets a new mark for OC-3 multi- unit high rackmount chassis (RMC). The Automatic Protection Switch (APS) plexers, delivering three DS3 circuits from a OPTI-3 can also be configured to operate single OC-3 feed. Designed to meet the redundantly with optional protection. It can � Interoperable with industry- standard SONET multiplexers growing demand for DS3 deployment in upgrade online from unprotected to today’s economy, the OPTI-3 eliminates the protected status. � Two or, with redundancy, four need for expensive SONET multiplexer equip- SM fibers at 1310 nm over a The DS3 BNC coax connectors are located ment in terminal mode applications and 40 km range or 1550 nm over on the rear of the OPTI-3 chassis. This permits an 80 km range provides the fullest use of OC-3 capacity. easy access to the customer side of the � DS3 signals, channelized/ The OPTI-3 is interoperable with other network for a convenient demarcation point, unchannelized SONET devices complying with GR-253 for or to extend services to DS3 multiplexer � Space-saving wallmount easy deployment in new and existing SONET applications. The fiber optics enter the chassis (WMC) or a one rack networks. A carrier-class device, the OPTI-3 chassis from the front of the unit and termi- unit high 19-in. or 23-in. rack- meets the needs of applications that require nate on the card with a dual SC connector for mounted chassis (RMC) extended temperature range operation such simple installation. The unit provides for � Single card, hot swappable as remote terminals. The fully integrated external auxiliary alarm inputs, and the RMC solution increases reliability design supports optional redundancy and is chassis provides additional alarm outputs for and reduces cost easily managed with support for TL1 CO alarms. � Management functions over commands over the Data Communications the DCC, TL-1 (including GNE), Channel (DCC). Additional management and SNMP features include a local craft interface, remote � Local craft port interface for alarm transport via DCC, and alarm reporting local management and Telnet to legacy alarm systems. Front panel LEDs for remote menu operation conveniently display status information. � Telcordia OSMINE compliant and NMA (via DCC) supported � Alarm history � Management of subtended units via IP/DCC � NEBS Level 3 compliant � Industry-leading 10-year warranty OC-3 Multiplexer ADTRAN, Inc. OPTI-3 Single OC-3 to Three DS3s 901 Explorer Boulevard Huntsville, AL 35806 Rack or Rackmount Chassis Wallmount Chassis Central Office Remote Site P.O. Box 140000 OC-3, 4 fibers, 40 km DS3 #1 DS3 #1 OPTI-3 1184002L1 Huntsville, AL 35814-4000 OPTI-3 OPTI-3 CRAFT DS3 #2 1184002L1 1184003L1 1184002L1 DS3 #2 APS TEST ACO 1:1 protected optics, APS as per GR-253, 1:1 protected DS3 OPTI-3 CRAFT CRAFT 1184002L1 ENABLE APS TEST ACO DS3 #3 DS3 #3 ENABLE CRAFT 256 963 8000 voice 256 963 8030 fax DS3 #1 DS3 #1 OPTI-3 1184002L1 OC-3, 2 fibers, 40 km OPTI-3 OPTI-3 877 457 5007 fax back 1184002L1 1184003L1 1184002L1 DS3 #2 APS TEST ACO CRAFT DS3 #2 CRAFT CRAFT ENABLE OPTI-3 1184002L1 unprotected optics, unprotected DS3 DS3 #3 APS TEST ACO DS3 #3 CRAFT ENABLE General Information 800 9ADTRAN SONET Multiplexer, IR or LR OC-3, 4 fibers, 40 km DS3 #1 DS3 #1 info@adtran.com OPTI-3 1184002L1 GR-253 CRAFT DS3 #2 compliant DS3 #2 www.adtran.com OPTI-3 1:1 protected optics, APS as per GR-253, 1:1 protected DS3 1184002L1 APS TEST ACO DS3 #3 DS3 #3 ENABLE CRAFT Pre-Sales Technical Support SONET Multiplexer, IR or LR DS3 #1 DS3 #1 888 5ADTRAN OPTI-3 1184002L1 GR-253 OC-3, 2 fibers, 40 km DS3 #2 DS3 #2 compliant CRAFT support@adtran.com OPTI-3 1184002L1 DS3 #3 DS3 #3 APS TEST ACO unprotected optics, unprotected DS3 www.adtran.com/support CRAFT ENABLE DS3 #1 Where to Buy DS3 #1 OPTI-3 OC-3, 2 fibers, 40 km 1184002L1 Active OPTI-3 OPTI-3 DS3 #2 1184002L1 1184003L1 1184002L1 CRAFT 800 827 0807 APS TEST ACO DS3 #2 CRAFT CRAFT OPTI-3 ENABLE 1184002L1 "Y Cable" - electronics protected Protect APS TEST ACO www.adtran.com/where2buy DS3 #3 CRAFT DS3 #3 1:1 protected DS3 ENABLE Post-Sales Technical Support 800 726 8663 Product Specifications support@adtran.com Regulatory Standards Front Panel Features www.adtran.com/support � � NEBS Level 3 GR-1089-CORE, Issue 3 LEDs Regional Offices � � � Board status � Optics status � DS3-1 NRTL Safety Listed GR-63-CORE, Issue 2 Dallas, TX � � � DS3-2 DS3-3 ACO 972 830 9070 Environmental Denver, CO Switches Rackmount Chassis 303 471 9150 � � ACO Test/APS enable � Operating temperature: –40°C to +65°C (19 in. and 23 in.) Irvine, CA � � 949 260 3500 APS Craft interface connector � Storage temperature: –40°C to +85°C (19 in. and 23 in.) Kansas City, KS � Relative humidity: 5 to 95 percent, noncondensing Mechanical 800 471 8649 Newark, NJ � Dimensions of WMC: 3.5 in. H x 6 in. W x 12 in. D Wallmount Chassis 800 471 8656 � � Operating temperature: –40°C to +70°C Mounting of WMC: Wall, shelf, or cabinet mountable Ontario, Canada � � Dimensions of RMC: 1.75 in. H x 13.5 in. W x 12 in. D Storage temperature: –40°C to +50°C 416 290 0585 Quebec, Canada � � Relative humidity: 5 to 95 percent, noncondensing Mounting of RMC: 19-in. or 23-in. rack mountable 877 923 8726 San Antonio, TX Interfaces 888 223 7671 � Single OC-3 standard optical interface to Ordering Information network with dual SC connector Equipment Part # International Inquiries � GR-253 compliant, 1310 nm or 1550 nm +1 256 963 8716 voice OPTI-3 wallmount chassis 1184001L1 +1 256 963 6300 fax � 3 DS3 level signals with standard 75 ohm BNC OPTI-3 card (1310 nm) 1184002L3 international@adtran.com connectors, DS3 or DS3 UNI www.adtran.com/international OPTI-3 card (1550 nm) 1184002L4 � 2 BITS clock inputs, wire wrap OPTI-3 19-in. or 23-in. rackmount chassis 1184003L1 Electrical Bundles Power Requirements WMC OPTI-3 with redundancy 4184001L1 � –48 VDC nominal (–42 to –56 VDC) or RMC OPTI-3 with redundancy 4184003L1 +24 VDC nominal (+22 to +26 VDC) or ADTRAN is an WMC OPTI-3 no redundancy 4184001L2 ISO 9001:2000 registered company. –24 VDC nominal (–22 to –26 VDC) RMC OPTI-3 no redundancy 4184003L2 � 8.5 watts nominal at –48 VDC WMC OPTI-3 with redundancy and battery backup 4184001L3 RMC OPTI-3 with redundancy and battery backup 4184003L3 ADTRAN is a TL 9000 registered company. Specifications are subject to change without notice. OPTI-3 is a trademark and 6118400xLx-8F April 2005 ADTRAN is a registered trademark of ADTRAN, Inc. All other registered trade- Copyright © 2005 ADTRAN, Inc. marks and trademarks mentioned in this publication are the property of their All rights reserved. respective owners. STATUS OPTICS DS3-1 DS3-2 DS3-3 ACO STATUS OPTICS DS3-1 DS3-2 DS3-3 ACO STATUS OPTICS DS3-1 DS3-2 DS3-3 ACO STATUS OPTICS DS3-1 DS3-2 DS3-3 ACO STATUS OPTICS DS3-1 DS3-2 DS3-3 ACO STATUS OPTICS DS3-1 DS3-2 DS3-3 ACO STATUS OPTICS DS3-1 DS3-2 DS3-3 ACO STATUS OPTICS DS3-1 DS3-2 DS3-3 ACO