DSX-3 Coaxial Cable Assemblies, Connectors and Tools To complement ADC’s DSX-3 products, a variety of coaxial cable assemblies, connectors, and tools are available. These products are designed to support technicians in patching, testing, and cross-connecting operations. Features: • Manufactured to exacting specifications, meeting the industry’s highest standards • Configurable cable assemblies and jumpers support specific network requirements • Patch cord kits and tool kits simplify ordering Patch Cords DSX-3 Patch Cords with RG59 Type Cable To patch between DSX-3 jacks Catalog Number PCH-MMXB-003 PCH-___ XB- ___ Plug Type** Patch Cord Length* MM Midsize plugs (both ends) XXX Length in feet SS Standard size plugs (both ends) (001 thru 050) BB BNC connector (both ends) Ordering Example: PCH-SSXB-003 Catalog number PCH-MMXB-012: 12' (3.66 m) patch cordwith MIDSIZE plugs on both ends. **Midsize Plug: **Standard Size Plug: Diameter = .298" (.76 cm) Diameter = .375" (.92 cm) *Standard patch cords length: 3', 6', 9', 12', 15', 18', 20', 25', 30', 35', 40', 45', 50' (.92, 1.83, 2.75, 3.66, 4.58, 5.49, 6.1, 7.63, 9.15, 10.68, 12.22, 13.73, 15.25 m) PCH-BBXB-003 Conversion Patch Cords with RG59 Type Cable To patch between different size jacks, such as DSX-3 jacks to test set jacks Catalog Number PCH-MSXB-003 PCH-___ XB- ___ Plug Type** Patch Cord Length* MS Midsize plug to Standard size plug XXX Length in feet BM BNC connector to Midsize plug (001 thru 050) BS BNC connector to Standard size plug Ordering Example: PCH-BMXB-003 Catalog number PCH-MSXB-012: 12' (3.66 m) patch cord with MIDSIZE plug on one end and STANDARD size plug on the other end. **Midsize Plug: **Standard Size Plug: Diameter = .298" (.76 cm) Diameter = .375" (.92 cm) *Standard patch cords length: 3', 6', 9', 12', 15', 18', 20', 25', 30', 35', 40', 45', 50' (.92, 1.83, 2.75, 3.66, 4.58, 5.49, 6.1, 7.63, 9.15, 10.68, 12.22, 13.73, 15.25 m) PCH-BSXB-003 www .adc.com • +1-952-938-8080 2 8/00 • 292 Coaxial Cable Assemblies Patch Cords Start-up Kits These convenient kits contain a variety of cords and plugs for inital circuit turn-up and on-going maintenance such as testing, patching and cutover operations. Ordering Information Description Midsize Plugs Standard Size Plugs Small Start-up Kit: for remote offices, CEVs, ACK-PCH-M1 ACK-PCH-S1 OSP cabinets, customer premises Kit includes: (2) 75 Ω termination plugs CP1501N CP1900 (2) 9" (22.86 cm) looping cords PCH-MMXB-000-009 PCH-SSXB-000-009 (2) patch cords - 3' (.92 m) PCH-MMXB-003 PCH-SSXB-003 (2) patch cords - 6' (1.83 m) PCH-MMXB-006 PCH-SSXB-006 (2) BNC conversion cords - 6' (1.83 m) PCH-MBXB-006 PCH-BSXB-006 (2) Midsize plug to standard size plug PCH-MSXB-006 PCH-MSXB-006 conversion cords - 6' (1.83 m) Medium Start-up Kit: for local central offices ACK-PCH-M2 ACK-PCH-S2 Kit includes: (12) 75 Ω termination plugs CP1501N CP1900 (12) 9" (22.86 cm) looping cords PCH-MMXB-000-009 PCH-SSXB-000-009 (4) patch cords - 3' (.92 m) PCH-MMXB-003 PCH-SSXB-003 (4) patch cords - 6' (1.83 m) PCH-MMXB-006 PCH-SSXB-006 (2) BNC conversion cords - 6' (1.83 m) PCH-MBXB-006 PCH-BSXB-006 (2) Midsize plug to standard size plug PCH-MSXB-006 PCH-MSXB-006 conversion cords - 6' (1.83 m) Large Start-up Kit: for large local or toll offices ACK-PCH-M3 ACK-PCH-S3 Kit includes: (24) 75 Ω termination plugs CP1501N CP1900 (24) 9" (22.86 cm) looping cords PCH-MMXB-000-009 PCH-SSXB-000-009 (8) patch cords - 3' (.92 m) PCH-MMXB-003 PCH-SSXB-003 (8) patch cords - 6' (1.83 m) PCH-MMXB-006 PCH-SSXB-006 (8) patch cords - 12' (3.66 m) PCH-MMXB-012 PCH-SSXB-012 (2) BNC conversion cords - 6' (1.83 m) PCH-MBXB-006 PCH-BSXB-006 (2) Midsize plug to standard size plug PCH-MSXB-006 PCH-MSXB-006 conversion cords - 6' (1.83 m) www .adc.com • +1-952-938-8080 3 8/00 • 292 Coaxial Cable Assemblies Cross-Connect Jumpers Cross-connect jumpers are available in a variety of configurations to match the type of DSX-3 cross-connect interface and meet specific network requirements. All cross-connect jumpers are equipped with a messenger wire and tracer pins to provide tracer lamp identification between the two DSX-3 positions being connected together. Options Connector Interface Types Connector types must be matched to the type of DSX-3 cross-connect interface. Typically both ends of the cross-connect jumper have the same type of connector interfaces. Only in rare conditions are the connectors different between ends; for example, when matching up to different type DSX systems. Cross-connect jumpers are available with connectors factory terminated on both ends, or with one end factory terminated and the second connector shipped unattached for field termination by the cus- tomer. This allows the customer to fit the jumper to the installation and eliminate excess jumper slack. Cable Types This is a customer preference depending on system density requirements and transmission limits. For example, the miniature type coaxial cables (i.e. 735A and 0222 type) greatly reduce jumper conges- tion. In addition, the miniature coaxial jumpers are available in dual cable types (2 coaxial conductors contained in one overall jacket) providing the convenience of installing one dual jumper as opposed to two single jumpers. The dual jumper's two coaxial conductors are color-coded (red and white) for identifying transmission directions. The overall outer jacket provides additional physical protection. Lengths Cross-connect jumpers are available in one foot (.305 m) increments up to 50 feet (.305 to 15.25 m). Typically a customer will stock an in-house supply containing a limited variety of lengths depend- ing on the size of the DSX environment (i.e. 3', 6', 9', 12', 15', 18', 20', etc.) www .adc.com • +1-952-938-8080 4 8/00 • 292 Coaxial Cable Assemblies Cross-Connect Jumpers Rear Cross-Connect DSX-3 Products, Factory or Field Terminated Catalog Number XCC- ___ ___ X ___ - ___ Connector Interface Type on First End of Jumper B Factory terminated BNC connector Jumper Length* (4J, 4U, 4H, 4M compatible) Factory terminated TNC connector T XXX Length in feet (4U, 4H, 4M compatible) (001 thru 050) Connector Interface Type on *Standard Jumper Lengths (Factory Terminated): Second End of Jumper 3', 6', 9', 12', 15', 18', 20', 25', 30', 35', 40', 45', 50' (.92, 1.83, 2.75, 3.66, 4.58, 5.49, B Factory terminated BNC connector 6.1, 7.63, 9.15, 10.68, 12.2, 13.73, 15.25 m) (4J, 4U, 4H, 4M compatible) T Factory terminated TNC connector Ordering Example: (4U, 4H, 4M compatible) Catalog number XCC-BBXD-015: 15' (4.58 m) dual cross-connect jumper using 735A type coaxial cable with tracer messenger wire, (2) BNC OR connectors and tracer pin factory terminated on both ends of cable. Connector Interface Type on Second End of Jumper *Standard Jumper Lengths (Field Terminated): Field terminated BNC connector 1 10', 20', 30', 40', 50' (3.05, 6.1, (4J, 4U, 4H, 4M compatible) 9.15, 12.2, 15.25 m) 0 Field terminated TNC connector Ordering Example: (4U, 4H, 4M compatible) Catalog number XCC-B1XD-010: 10' (3.05 m) dual cross-connect jumper using 735A type coaxial cable with tracer messenger wire, (2) BNC connectors and tracer pin factory terminated on one end of cable, (2) Coaxial Cable Type BNC connectors and tracer pin shipped unattached for B Single RG59 with tracer messenger wire field termination by customer on other end of cable. (4M compatible) C Single 735A with tracer messenger wire (4J, 4U, 4H, 4M compatible) D Dual 735A with tracer messenger wire (4J, 4U, 4H, 4M compatible) XCC-BBXD-003 J Single 0222 with tracer messenger wire Connector(s) and tracer (4J, 4U, 4H, 4M compatible) pins are factory terminat- K Dual 0222 with tracer messenger wire ed on both ends. (4J, 4U, 4H, 4M compatible) XCC-B1XD-003 Connector(s) and tracer pin are factory terminat- ed on one end. The con- nector(s) and tracer pin for the other end are shipped unattached for customer termination. www .adc.com • +1-952-938-8080 5 8/00 • 292 Coaxial Cable Assemblies Cross-Connect Jumpers Front Cross-Connect DSX-3 Products, Factory Terminated Catalog Number XCC- ___ ___ X ___ - ___ Connector Interface Type on First End of Jumper P Midsize plug (4F compatible) M Midsize plug (4B, 4M compatible) S Standard size plug (4M compatible) B BNC connector (4S compatible) Connector Interface Type on Second End of Jumper P Midsize plug (4F compatible) M Midsize plug (4B, 4M compatible) S Standard size plug (4M compatible) B BNC connector (4S compatible) Coaxial Cable Type B Single RG59 with tracer messenger wire (4M compatible) C Single 735A with tracer messenger wire (4B, 4M, 4S compatible) D Dual 735A with tracer messenger wire (4B, 4M, 4S compatible) J Single 0222 with tracer messenger wire Jumper Length* (4B, 4F, 4M, 4S compatible) XXX Length in feet K Dual 0222 with tracer messenger wire (001 thru 050) (4B, 4F, 4M, 4S compatible) *Standard Jumper Lengths: 3', 6', 9', 12', 15', 18', 20', 25', 30', 35', 40', 45', 50' (.92, 1.83, 2.75, 3.66, 4.58, 5.49, 6.1, 7.63, 9.15, 10.68, 12.2, 13.73, 15.25 m) Ordering Example: Catalog number XCC-MMXD-015: 15' (4.58 m) long dual cross-connect jumper using 735A type coaxial cable with tracer messenger wire, (2) midsize plugs and tracer pin factory terminated on both ends of cable XCC-MMXB-003 XCC-MMXD-003 Connectors and tracer pins factory terminated on both ends. www .adc.com • +1-952-938-8080 6 8/00 • 292 Coaxial Cable Assemblies Equipment Cable Pre-Terminated Equipment Cable Pre-terminated equipment cable is available with connectors on one or both ends of the cable. Cable types include single RG59, 734 and 735A coaxial cables. In addition, the miniature 735A type cable is available in bundled cable with an outer overall jacket enclosing 2, 3, 6, 9 or 12 individually numbered coaxial conductors. Catalog Number PCH- ___ ___ X ___ - ___ Connector Interface Type on First End of Jumper Cable Length BNC connector B XXX Length in feet R Right angle BNC connector (order in 25' [7.63 m] TNC connector T increments) Connector Interface Type on Second End of Jumper Ordering Example: Catalog number PCH-BXXT-150: B BNC connector 150' (45.75m) 6 pack cable using Right angle BNC connector R 735A type coaxial cable with BNC T TNC connector connectors on one end only. No connector (customer provided) X Coaxial Cable Type B Single RG59 E Single 734 C Single 735A D Dual 735A (2 coaxial conductors) R 3 pack 735A (3 coaxial conductors) T 6 pack 735A (6 coaxial conductors) W 9 pack 735A (9 coaxial conductors) X 12 pack 735A (12 coaxial conductors) PCH-BXXX-025 Bulk Equipment Cable Ordering Information Description Catalog Number Single RG59 HDW-100237 Single 734 DSX-3-CMP Single 735A 3AC-BB Dual 735A (2 coaxial conductors) 3AC-2BB 3 pack 735A (3 coaxial conductors) 3AC-3BB 6 pack 735A (6 coaxial conductors) 3AC-6BB 9 pack 735A (9 coaxial conductors) 3AC-9BB 12 pack 735A (12 coaxial conductors) 3AC-12BB www .adc.com • +1-952-938-8080 7 8/00 • 292 Coaxial Cable Assemblies Coaxial Connectors Straight BNC Connectors Ordering Information Description BNC-3 BNC-7 BNC-2 BNC-1 BNC-4 Cable type 735A 0222 RG59 734 728 Cable dimensions: Outer jack diameter 0.127" 0.155" 0.241" 0.236" 0.305" Center conductor 26 gauge 24 gauge 23 gauge 20 gauge 20 gauge Connector crimp dimensions: Sleeve 0.178" 0.197" 0.255" 0.255" 0.324" Center pin* 0.042" 0.042" 0.042" 0.042" 0.042" Coaxial tools: Crimp tool WT-2 WT-2 WT-2 WT-2 WT-2 Crimp die set WD-2 WD-3 WD-1/WD-2 WD-1/WD-2 WD-1/WD-2 Complete stripping tool STC-13B STC-13B STC-12B STC-12B STC-11B Replacement cassette CCS-BLK CCS-BLK CCS-BLK CCS-BLK CCS-BLK *In addition to the .042" square pin crimp, all connectors listed above are compatible with a 12 point method of crimping. Tools for connector termination are available on pages 10 and 11. BNC-3 Right Angle BNC Connectors Ordering Information Description BNC-RA-3 BNC-RA-7 BNC-RA-2 BNC-RA-1 BNC-RA-4 Cable type 735A 0222 RG59 734 728 Cable dimensions: Outer jack diameter 0.127" 0.155" 0.241" 0.236" 0.305" Center conductor 26 gauge 24 gauge 23 gauge 20 gauge 20 gauge Connector crimp dimensions: Sleeve 0.178" 0.197" 0.255" 0.255" 0.324" Center pin* 0.042" 0.042" 0.042" 0.042" 0.042" Coaxial tools: Crimp tool WT-2 WT-2 WT-2 WT-2 WT-2 Crimp die set WD-2 WD-3 WD-1/WD-2 WD-1/WD-2 WD-1/WD-2 Complete stripping tool STC-13B STC-13B STC-12B STC-12B STC-11B Replacement cassette CCS-BLK CCS-BLK CCS-BLK CCS-BLK CCS-BLK *In addition to the .042" square pin crimp, all connectors listed above are compatible with a 12 point method of crimping. Tools for connector termination are available on pages 10 and 11. BNC-RA-3 www .adc.com • +1-952-938-8080 8 8/00 • 292 Coaxial Cable Assemblies Coaxial Connectors Straight TNC Connectors Ordering Information Description TNC-3 TNC-7 TNC-2 TNC-1 TNC-4 Cable type 735A 0222 RG59 734 728 Cable dimensions: Outer jack diameter 0.127" 0.155" 0.241" 0.236" 0.305" Center conductor 26 gauge 24 gauge 23 gauge 20 gauge 20 gauge Connector crimp dimensions: Sleeve 0.178" 0.197" 0.255" 0.255" 0.324" Center pin* 0.042" 0.042" 0.042" 0.042" 0.042" Coaxial tools: Crimp tool WT-2 WT-2 WT-2 WT-2 WT-2 Crimp die set WD-2 WD-3 WD-1/WD-2 WD-1/WD-2 WD-1/WD-2 Complete stripping tool STC-13B STC-13B STC-12B STC-12B STC-11B Replacement cassette CCS-BLK CCS-BLK CCS-BLK CCS-BLK CCS-BLK *In addition to the .042" square pin crimp, all connectors listed above are compatible with a 12 point method of crimping. Tools for connector termination are available on pages 10 and 11. TNC-3 www .adc.com • +1-952-938-8080 9 8/00 • 292 Coaxial Cable Assemblies Tool Kit Ordering Information Description Catalog Number Tool Kit Includes: BNC-TOOL-1 • Crimp Tool (WT-2) • BNC crimp die set for 735, RG59 and 734 cables (WD-2) • Stripping tool with cassette for 735/0222 cables (STC-13B) • Stripping tool with cassette for RG59/734 cables (STC-12B) • Cable termination tray (LCA-000009) • Insertion/withdrawal tool for BNC BNC-TOOL-1 connectors (BT2000) • Carrying case To order individual tools, see ordering information on next page. www .adc.com • +1-952-938-8080 10 8/00 • 292 Coaxial Cable Assemblies Individual Tools Ordering Information Description Catalog Number Adjustable cable termination tray for 19" or 23" chassis LCA-000009 Insertion/withdrawal tool BNC connector BT2000 TNC connector TT1000 Crimp tool WT-2 Crimp die set for WT-2 tool 735, RG59 and 734 cables WD-2 0222 cable WD-3 RG59, 734 and 728 cables WD-1 Coaxial cable cutter DSX-3 CCUT Stripping tool with black cassette for BNC or TNC connector 735A/0222 cables STC-13B RG59/734 cables STC-12B 728 cables STC-11B Replacement cassette for BNC or TNC connector 735A/0222/RG59/734/728 cables CCS-BLK BT2000 TT1000 WT-2 STC-13B LCA-000009 DSX-3 CCUT www .adc.com • +1-952-938-8080 11 8/00 • 292 Coaxial Cable Assemblies Web Site: www.adc.com Web Site: www.adc.com From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-946-3292 From North/South America, Call Toll Free: 1-800-366-3891 or +1-952-938-8080 • Outside North/South America: +1-358-8-520-5600 For a complete listing of ADC's global sales office locations, please refer to our web site. From North/South America, Fax: +1-952-946-3292 • Outside North/South America, Fax: +1-358-8-520-5750 ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101 For a Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our head- quarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features contained herein may be covered by one or more U.S. or foreign patents. 292 08/00 Revision © 1997, 2000 ADC Telecommunications, Inc. All Rights Reserved An Equal Opportunity Employer ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products,