SMQ600.qxd 15/5/03 11:13 am Page 1 AC/DC U-Channel 600 Watts XPiQ inc. Intelligent Design Quality Product SMQ600 Series High Power Density • • High Peak Load Rating • Active PFC • Universal Input • Single Outputs from 3.3 V to 54 V • International Safety Approvals Specification Input General Input Voltage • 90-264 VAC Efficiency • 70% minimum at 230 VAC, 65% min for Vo <=5V Input Frequency • 47-63 Hz 3 Power Density • 6.16 W/in Power Factor • 0.99 typical MTBF • 100,000 hrs per MIL-HDBK-217F Inrush Current • 70 A Peak at 230 VAC Isolation Voltage • 3000 VAC Input to Output Input Current • 10 A at 90 VAC 1500 VAC Input to Ground Leakage Current • <3.5 mA 500 VAC Output to Ground Remote On/Off • On = TTL Logic HIGH, or open circuit Signals • Green LED for Power On Off = TTL Logic LOW or short circuit DC OK TTL HIGH within 100-500 ms LOW at least 1 ms before loss Output of regulation Output Voltage • 3.3 VDC to 54 VDC Size • 9.17” x 4.25” x 2.50” Output Power • See Table Weight • 0.5 Ib (1.1 kg) approx Output Voltage • ±5% Adjustment Environmental Minimum Load • No minimum load required Operating • 0°C to +70°C derate linearly from Line Regulation • ±0.5% from low line to high line Temperature 100% load at +50 °C to 50% load Load Regulation • ±1% at +70°C Ripple & Noise • 50mV (Vo<=5V), 1% (Vo>=12V) Cooling • Via internal fan Transient Response • 5% max deviation, 2.5 ms recovery Relative Humidity • 5% to 90%, non-condensing time to within 1% for a 50% load Storage • -20 °C to +85°C change Temperature Hold up Time • 20ms minimum at 120 VAC and 80% load EMC & Safety Turn On Time • 1 second max at 120 VAC Safety Approvals • UL1950, CSA C22.2 No 950 Overvoltage • 130% recycle input to reset EN60950, CE Mark LVD Protection EMI/EMC • Meets EN61000-3-2, -3 Overcurrent • 110% to 135% with auto recovery FCC Part 15 and CISPR 22 Class B Protection conducted Overtemperature • >85°C ambient with auto recovery Protection measured internally Remote Sense • Compensates for up to 0.5 V drop • • PH: 508 429.9883 FAX: 800 226.2100 Email: sales@xpiq.com Holliston, MA 01746 USA www.XPiQ.com SMQ600.qxd 15/5/03 11:13 am Page 2 OUTPUT VOLTAGE & CURRENT RATINGS SMQ600 Maximum Output Output Current Ripple Model (1) (3) Power Voltage Maximum Peak & Noise Number 396 W 3.3 V 120.00 A 180.00 A 50 mV SMQ600PS03-C 500 W 5.0 V 100.00 A 160.00 A 50 mV SMQ600PS05-C 600 W 12.0 V 50.00 A 75.00 A 120 mV SMQ600PS12-C 600 W 15.0 V 40.00 A 56.00 A 150 mV SMQ600PS15-C 600 W 18.0 V 33.33 A 54.00 A 180 mV SMQ600PS18-C 600 W 24.0 V 25.00 A 40.00 A 240 mV SMQ600PS24-C 600 W 27.0 V 22.20 A 40.00 A 270 mV SMQ600PS27-C 600 W 48.0 V 12.50 A 18.80 A 480 mV SMQ600PS48-C 600 W 54.0 V 11.10 A 18.80 A 540 mV SMQ600PS54-C Notes 1. Standard models have foldback mode current protection with a high peak load capability. This peak can be taken for 1 ms only. 2. For optional constant current versions, add suffix ‘B’ to model number (current limit range is 95-105% of max output current). Not available on 3.3 V and 5 V models. 3. Ripple and noise measured using 0.1 µF ceramic and 22 µF electrolytic capacitor, 20 MHz bandwidth. 4. Part numbers in bold are stocking models. Others are build to order. 5. Other output voltages are available, contact factory for details. • Mechanical Details CN4 (Signals) Pin Function 1 ON/OFF NOTES: 2DCOK 1. Dimensions in inches (mm). 3RTN 2. Remote ON/OFF CN4 mates with JST XHP-3 or equivalent CN5 (Remote Sense) 3. Fan Connector CN3 is wired in parallel to the internal fan. No auxilary output is available. Pin Function 4. Remote sense CN5 mates with JST XHP-2 or equivalent. 1+ RS 5. Weight: 0.5 Ib (1.1 kg) approx. 2- RS PH: 508 429.9883 FAX: 800 226.2100 Email: sales@xpiq.com Holliston, MA 01746 USA www.XPiQ.com Rev 1.0