Manufacturers
XP POWER RTC200PM42
Description
XP Power RTC200PM42 Power Supply. AC/DC Compact PCI | 200W | 90-264V Input Voltage | +5V, +3.3V, +12V, -12V Quad Outputs
Part Number
RTC200PM42
Price
Request Quote
Manufacturer
XP POWER
Lead Time
Request Quote
Category
Power Supply
Specifications
AC version or 36 VDC for DC version
Output
Cooling
400 LFM/30 CFM required for full power
Efficiency
70% typical
Hold Up Time
10 ms minimum at full load and 90 VAC
Initial Set Accuracy
3.3 V and 5 V: ±10 mV. ±12 V: ±25 mV
Input Current
2.2/1.1 A at 115/230 VAC
Input Frequency
47-63 Hz
Input Protection
6.3 A fuse
Input Voltage
90-264 VAC or 36-72 VDC
Inrush Current
AC: 30 A at 120 VAC, 60 A at 230 VAC; DC: 40 A at 48 VDC (80 A for 400 W)
Isolation
3000 VAC Input to Output; 1500 VAC Input to Ground; 500 VAC Output to Ground
Line Regulation
±2% max
Load Regulation
±2% max (±3% for V4)
Minimum Load
No minimum load required
MTBF
100 kHrs per MIL-HDBK-217F
Operating Altitude
3000 m
Operating Humidity
10-95% RH, non-condensing
Operating Temperature
0 °C to +70 °C, derate linearly from 100% power at 50 °C to 50% power at 70 °C
Output Voltage
4 outputs with 3.3 V, 5 V and ±12 V
Output Voltage Trim
±0.25 V on each rail
Over-temperature Protection
Shuts down at 110 °C, auto recovery, warning signal at 90 °C measured internally
Over-Voltage Protection
110-135% Vnom, recycle input to reset
Overload Protection
Latching
Power Density
RTC200: 3.7 W/In3
Power Factor
0.99 typical
Power Fail
TTL compatible signal, open collector active low signal. Indicates any output below 90% and/or input below 60 VAC for
Remote Enable
On
Remote Inhibit
On
Ripple & Noise
1% pk-pk, 20MHz BW
Shock
MIL-STD-810D
Short Circuit Protection
Protected to short circuit conditions
Signals
Margining, thermal warning, power fail, enable and inhibit
Start Up Delay
2 s at 115 VAC
Storage Temperature
-40 °C to +85 °C
Switching Frequency
135 kHz typical
Temperature Coefficient
0.05% /°C
Transient Response
5% max. deviation, recovery to within 1% in 500 µs for a 25% load change
Vibration
MIL-STD-810D
Features
- AC or DC Input Versions
- Active Current Share
- Hot Swap N+1 Redundancy
- Industry Standard
- International Safety Approvals
- PICMG 2.11 Compatible
- Power Factor Corrected
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the RTC200PM42?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
XP Power ACS Series 40-60 Watt Power Supply
XP Power AEH130PD01 Power Supplies - Output Power Max: 90 W Voltage Nom: +3.3 V AEH130 Series
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods