Manufacturers
XP POWER PCM50US24
Description
XP Power PCM50US24 Power Supply - External Power Supply
Part Number
PCM50US24
Price
Request Quote
Manufacturer
XP POWER
Lead Time
Request Quote
Category
Power Supply
Specifications
Conducted Immunity
IEC61000-4-6 10 V/m, level 3; Perf Criteria B
Dips & Interruptions
IEC61000-4-11, 30% 500 ms, 60% 100 ms, 100 % 5000 ms; Perf Criteria A, A, C
Earth Leakage Current
180 µA max at 132 VAC/60Hz; 300 µA max at 264 VAC/50Hz
Efficiency
Single output models:80% typical; Multi output models:75% typical
EFT/Burst
IEC61000-4-4, level 3; Perf Criteria B
Emissions
EN55022, level B conducted; EN55022, level B radiated
ESD Immunity
IEC61000-4-2, level 3; Perf Criteria B
Harmonic Currents
EN61000-3-2, class A
Hold Up Time
10 ms min at low line
Input Current
1.35 A max
Input Frequency
47-63 Hz
Input Voltage
90-264 VAC
Inrush Current
30 A at 115 VAC or 60 A at 230 VAC at 25 °C cold start
Isolation
4000 VAC Input to Output; 1500 VAC Input to Ground; 500 VAC Output to Ground
Line Regulation
±1% max at full load for ±10% change in input
Load Regulation
±5% max
Minimum Load
No minimum load required for single output models
MTBF
100 kHrs at full load and 25°C ambient per MIL-HDBK-217F
Overcurrent Protection
110-200% with auto recovery on all outputs
Overvoltage Protection
112-132% with auto recovery on V1
Power Factor
0.55 typical
Power Frequency Magnetic Fields
IEC61000-4-8 10 A/m, Perf Criteria B
Radiated Immunity
IEC61000-4-3 10 V/m, level 3; Perf Criteria B
Ripple & Noise
2% pk-pk, 20MHz BW
Safety Approvals
UL60601-1, CSA C22.2 No. 601.1 per cUL; EN60601-1, CCC (PCM80)
Start Up Delay
2 s max
Surge
IEC61000-4-5, level 3; Perf Criteria B
Switching Frequency
64 kHz typical
Temperature
Operating:0°C to +70°C, derate from 100% load at 50°C to 50% load at +70°C; Storage:-40°C to +80°C
Temperature Coefficient
±0.05% /°C
Transient Response
5% max. deviation, 500 µs recovery time for a 50% load change
Voltage Flicker
EN61000-3-3 amendments 1 & 2
Datasheet
Extracted Text
50/80/120 Watts xppower.com PCM Series • 4000 VAC Isloation • Low Leakage Current • Single, Dual and Triple Outputs • Worldwide Medical Approvals • CCC Approved (PCM80) • Both Line and Neutral Fused • Non-standard Connectors Available Specification Input General Input Voltage • 90-264 VAC Efficiency • Single output models: 80% typical Multi output models: 75% typical Input Frequency • 47-63 Hz Isolation • 4000 VAC Input to Output Input Current • PCM50: 1.35 A max 1500 VAC Input to Ground PCM80: 1.30 A max 500 VAC Output to Ground PCM120: 1.60 A max Switching Frequency • PCM50: 64 kHz typical Inrush Current • 30 A at 115 VAC or PCM80: 55 kHz typical 60 A at 230 VAC at 25 ˚C cold start PCM120: 120 kHz typical Power Factor • PCM50: 0.55 typical MTBF • 100 kHrs at full load and 25 ˚C ambient PCM80/120: 0.94 min per MIL-HDBK-217F Earth Leakage Current • 180 µA max at 132 VAC/60Hz 300 µA max at 264 VAC/50Hz Environmental Output Operating Temperature • PCM50: 0 ˚C to +70 ˚C, derate from 100% load at 50 ˚C to 50% load at +70 ˚C Output Voltage • See tables PCM80: 0 ˚C to +70 ˚C, derate from 100% Minimum Load • No minimum load required for single load at 40 ˚C to 50% load at +70 ˚C output models. See tables for multi PCM120: 0 ˚C to +60 ˚C, derate from output models 100% load at 40 ˚C to 50% load at +60 ˚C Start Up Delay • 2 s max Storage Temperature • PCM50/80: -40 ˚C to +80 ˚C Hold Up Time • 10 ms min at low line PCM120: -20 ˚C to +85 ˚C Line Regulation • ±1% max at full load for ±10% change in input EMC & Safety Load Regulation • ±5% max Emissions • EN55022, level B conducted Transient Response • 5% max. deviation, 500 µs recovery time EN55022, level B radiated for a 50% load change Harmonic Currents • EN61000-3-2, class A Ripple & Noise • 2% pk-pk, 20MHz BW Voltage Flicker • EN61000-3-3 amendments 1 & 2 Overvoltage Protection • 112-132% with auto recovery on V1 ESD Immunity • IEC61000-4-2, level 3 Overcurrent Protection • 110-200% with auto recovery Perf Criteria B on all outputs Radiated Immunity • IEC61000-4-3 10 V/m, level 3 Temperature • ±0.05% /˚C Perf Criteria B Coefficient EFT/Burst • IEC61000-4-4, level 3 Perf Criteria B Surge • IEC61000-4-5, level 3 Perf Criteria B Conducted Immunity • IEC61000-4-6 10 V/m, level 3 Perf Criteria B Power Frequency • IEC61000-4-8 10 A/m, Perf Criteria B Magnetic Fields Dips & Interruptions • IEC61000-4-11, 30% 500 ms, 60% 100 ms, 100 % 5000 ms Perf Criteria A, A, C Safety Approvals • UL60601-1, CSA C22.2 No. 601.1 per cUL EN60601-1, CCC (PCM80) AC-DC AC-DC PCM50 Models and Ratings Maximum (1) Output Voltage Output Current Regulation Model Number Output Power 30 W 2.5 V 12.00 A 7% PCM50US2V5† 40 W 3.3 V 8.00 A 5% PCM50US3V3† 40 W 5.0 V 8.00 A 5% PCM50US05†* 42 W 7.0 V 6.00 A 5% PCM50US07† 45 W 9.0 V 5.00 A 4% PCM50US09†* 45 W 12.0 V 3.75 A 3% PCM50US12†* 45 W 15.0 V 3.00 A 3% PCM50US15†* 50 W 18.0 V 2.77 A 3% PCM50US18†* 50 W 24.0 V 2.08 A 2% PCM50US24†* 50 W 28.0 V 1.78 A 2% PCM50US28†* 50 W 36.0 V 1.38 A 2% PCM50US36† 50 W 48.0 V 1.04 A 2% PCM50US48†* Output 1 Output 2 Output 3 Output Model (1) (4, 5) (1) (1) Power Vnom Imin Imax Tol. Vnom Imin Imax Tol. Vnom Imin Imax Tol. Number 26.5 W +3.3 V 1.0 A 5.0 A 7% +5.0 V 0.4 A 2.0 A 5% PCM50UD00† 42.0 W +3.3 V 0.5 A 5.0 A 7% +12.0 V 0.2 A 2.0 A 5% PCM50UD01 42.0 W +5.0 V 0.2 A 5.0 A 5% -5.0 V 0.2 A 2.0 A 5% PCM50UD02† 42.0 W +5.0 V 0.5 A 5.0 A 5% +12.0 V 0.2 A 2.0 A 5% PCM50UD03 42.0 W +5.0 V 0.5 A 5.0 A 5% +15.0 V 0.2 A 1.5 A 6% PCM50UD04 42.0 W +5.0 V 0.5 A 5.0 A 5% +24.0 V 0.1 A 1.0 A 5% PCM50UD05 42.0 W +5.0 V 0.5 A 5.0 A 5% -24.0 V 0.1 A 1.0 A 5% PCM50UD06† 42.0 W +12.0 V 0.5 A 3.0 A 5% -12.0 V 0.2 A 1.0 A 5% PCM50UD07† 42.0 W +15.0 V 0.5 A 2.0 A 5% -15.0 V 0.2 A 1.0 A 5% PCM50UD08† 42.0 W +5.1 V 0.0 A 5.0 A 5% +7.2 V 0.2 A 2.6 A 5% PCM50UD10 42.0 W +10.5 V 0.2 A 2.0 A 5% -10.5 V 0.2 A 2.0 A 5% PCM50UD11 42.0 W +3.3 V 0.5 A 5.0 A 7% +12.0 V 0.2 A 2.0 A 5% -5.0 V 0.0 A 0.8 A 5% PCM50UT01† 42.0 W +3.3 V 0.5 A 5.0 A 7% +12.0 V 0.2 A 2.0 A 5% -12.0 V 0.0 A 0.8 A 5% PCM50UT02† 42.0 W +5.0 V 0.5 A 5.0 A 5% +12.0 V 0.2 A 2.0 A 5% -5.0 V 0.0 A 0.8 A 5% PCM50UT03† 42.0 W +5.0 V 0.5 A 5.0 A 5% +12.0 V 0.2 A 2.0 A 5% -12.0 V 0.0 A 0.8 A 5% PCM50UT04†* 42.0 W +5.0 V 0.5 A 5.0 A 5% +15.0 V 0.2 A 2.0 A 6% -15.0 V 0.0 A 0.8 A 5% PCM50UT05†* 42.0 W +5.0 V 0.5 A 5.0 A 5% +24.0 V 0.1 A 1.0 A 5% -12.0 V 0.0 A 0.8 A 5% PCM50UT06† 42.0 W +5.0 V 0.5 A 5.0 A 5% +24.0 V 0.1 A 1.0 A 5% -24.0 V 0.0 A 0.5 A 5% PCM50UT07† Notes 1. Regulation includes initial set tolerance, line regulation and load regulation. † Available from Farnell InOne. See pages 236-237 *Available from Newark InOne. See page 238 Mechanical Details All dimensions are in inches (mm) Weight: 0.88-1.21 lb (400-550 g) approx. Tolerance: 0.04 (1.0) maximum PIN CONNECTIONS Pin Single Dual Triple 1 Common Common Common 5.75 (146.0) 2 Common Common Common 3 Output Output 1 Output 1 4 Common Common Output 3 5 Output Output 2 Output 2 Notes: 1. Cable length is 48.0” (1.22m) approx. 2. For mating connector, use standard 5 pin din 180˚ socket. 3. Optional output connectors available, contact AC INPUT POWER LED sales office. IEC 320 INLET 4. Multi output models include a ferrite bead on the output connector. 3 5 2 4 1 DC OUTPUT 5 PIN PLUG 2.99 (76.0) 1.69 (43.0) PCM80 Models and Ratings Output 1 Output 2 Output 3 Output Model (1) (4, 5) (1) (1) Power Vnom Imin Imax Tol. Vnom Imin Imax Tol. Vnom Imin Imax Tol. Number 50.0 W 3.3 V 0.0 A 15.1 A 7% PCM80PS3V3† 65.0 W 5.0 V 0.0 A 13.0 A 5% PCM80PS05†* 70.0 W 7.0 V 0.0 A 10.0 A 5% PCM80PS07† 75.0 W 9.0 V 0.0 A 8.3 A 5% PCM80PS09†* 75.0 W 10.0 V 0.0 A 7.5 A 5% PCM80PS10 80.0 W 12.0 V 0.0 A 6.7 A 5% PCM80PS12†* 80.0 W 13.5 V 0.0 A 5.9 A 5% PCM80PS13V5† 80.0 W 15.0 V 0.0 A 5.3 A 5% PCM80PS15†* 80.0 W 16.0 V 0.0 A 5.0 A 5% PCM80PS16 80.0 W 17.5 V 0.0 A 4.6 A 5% PCM80PS17V5 80.0 W 18.0 V 0.0 A 4.4 A 5% PCM80PS18†* 80.0 W 24.0 V 0.0 A 3.3 A 5% PCM80PS24†* 80.0 W 27.0 V 0.0 A 3.0 A 5% PCM80PS27†* 80.0 W 30.0 V 0.0 A 2.7 A 5% PCM80PS30 80.0 W 36.0 V 0.0 A 2.2 A 3% PCM80PS36 80.0 W 48.0 V 0.0 A 1.7 A 3% PCM80PS48†* 38.0 W 3.3 V 0.5 A 7.0 A 5% 5.0 V 0.3 A 3.0 A 5% PCM80PD00 53.0 W 3.3 V 0.5 A 7.0 A 5% 12.0 V 0.2 A 2.5 A 5% PCM80PD01 60.0 W 5.0 V 0.5 A 7.0 A 5% 12.0 V 0.2 A 2.5 A 5% PCM80PD02 60.0 W 5.0 V 0.5 A 7.0 A 5% 15.0 V 0.2 A 2.0 A 5% PCM80PD03 60.0 W 5.0 V 0.5 A 7.0 A 5% 24.0 V 0.2 A 2.0 A 5% PCM80PD04 60.0 W 5.0 V 0.5 A 7.0 A 5% -24.0 V 0.2 A 2.0 A 5% PCM80PD05 65.0 W 12.0 V 0.5 A 5.0 A 5% -12.0 V 0.1 A 0.8 A 5% PCM80PD06 65.0 W 15.0 V 0.5 A 4.0 A 5% -15.0 V 0.1 A 0.8 A 5% PCM80PD07 65.0 W 24.0 V 0.5 A 2.1 A 5% -24.0 V 0.1 A 0.8 A 5% PCM80PD08 51.0 W 3.3 V 0.5 A 7.0 A 5% 12.0 V 0.2 A 2.0 A 5% -5.0 V 0.1 A 0.8 A 5% PCM80PT01† 60.0 W 5.0 V 0.5 A 6.0 A 5% 12.0 V 0.2 A 2.5 A 5% -5.0 V 0.1 A 0.5 A 5% PCM80PT03† 60.0 W 5.0 V 0.5 A 6.0 A 5% 12.0 V 0.2 A 2.1 A 5% -12.0 V 0.1 A 0.5 A 5% PCM80PT04†* 65.0 W 5.0 V 0.5 A 6.0 A 5% 15.0 V 0.2 A 2.1 A 5% -15.0 V 0.1 A 0.5 A 5% PCM80PT05†* 60.0 W 5.0 V 0.5 A 6.0 A 5% 24.0 V 0.1 A 1.2 A 5% -12.0 V 0.1 A 0.5 A 5% PCM80PT06 65.0 W 5.0 V 0.5 A 7.0 A 5% 24.0 V 0.2 A 2.0 A 5% -24.0 V 0.1 A 0.5 A 5% PCM80PT07 Notes 1. Regulation includes initial set tolerance, line regulation and load regulation. † Available from Farnell InOne. See pages 236-237 *Available from Newark InOne. See page 238 Mechanical Details All dimensions are in inches (mm) Weight: 1.76-1.98 lb (800-900 g) approx. Tolerance: 0.04 (1.0) maximum PIN CONNECTIONS Pin Single Dual Triple 6.63 (168.4) 1 Common Common Common 2 Common Output 2 Output 3 3 Output 1 Output 1 Output 1 4 Common Output 2 Output 2 5 Output 1 Output 1 Output 2 6 Common Common Common 7 Output 1 Output 1 Output 1 8 Output 1 Common Output 3 Shell Ground Ground Ground Notes: 1. Cable length is 48.0” (1.22m) approx. 2. Optional output connectors available, contact sales office. 3. Multi output models include a ferrite bead on AC INPUT POWER LED the output connector. IEC 320 INLET 8 6 7 1 3 4 5 2 DC OUTPUT 8 PIN DIN PLUG AC-DC 3.07 (78.0) 1.97 (50.0) AC-DC PCM120 Models and Ratings Maximum (1) Output Voltage Output Current Peak Current Model Number Output Power 108 W 12.0 V 9.00 A 15.00 A PCM120PS12†* 113 W 15.0 V 7.50 A 10.00 A PCM120PS15†* 120 W 18.0 V 6.50 A 9.00 A PCM120PS18†* 120 W 24.0 V 5.00 A 7.00 A PCM120PS24†* 120 W 48.0 V 2.50 A 4.00 A PCM120PS48†* Notes 1. Peak current is 5 seconds maximum duration with a 10% duty cycle. † Available from Farnell InOne. See pages 236-237 *Available from Newark InOne. See page 238 Mechanical Details All dimensions are in inches (mm) Weight: 1.90 lb (860 g) approx. Tolerance: 0.04 (1.0) maximum 7.08 (180.0) POWER LED PIN CONNECTIONS Pin All models AC INPUT 1 Return IEC 320 INLET 2 Return 3 Output +V 4 Return 5 Output +V 8 6 7 6 Return 7 Output +V 1 3 8 Output +V 4 5 2 Notes: DC OUTPUT 1. Cable length is 72.0” (1.83m) approx. 8 PIN PLUG 2. Optional output connectors available, contact sales office. Derating Curve 100 50 0 10 20 30 40 50 60 Ambient Temperature (˚C) 19-May-06 3.74 (95.0) Load (%) 1.85 (47.0)
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the PCM50US24?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
XP Power ACS Series 40-60 Watt Power Supply
XP Power AEH130PD01 Power Supplies - Output Power Max: 90 W Voltage Nom: +3.3 V AEH130 Series
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods