Manufacturers
XP POWER JPS250PQ46
Description
XP Power JPS250PQ46 Power Supply - PSU, Open Frame, 250W Power 4O/P
Part Number
JPS250PQ46
Price
Request Quote
Manufacturer
XP POWER
Lead Time
Request Quote
Category
Power Supply
Specifications
General
1500 VAC Input to Ground
200 W convection cooling
24 V model: 24 V at 80 mA, all other models: 12 V at 112 mA
500 VAC Output to Ground
Cooling
250 W with 18 CFM airflow
Current Share
Single wire current sharing on single output models & V1 & V2 of multi-output models (4 supplies can be paralleled)
Earth Leakage Current
2.0 mA max 264 VAC/60 Hz
Efficiency
Up to 88%
Fan Output
5 V model: 5 V at 390 mA,
Hold Up Time
20 ms min at low line & rated load
Initial Set Accuracy
At 60% rated load ±1% on V1 & V2, ±5% on V3 & V4
Input Current
2.75 A/1.40 A max at 115 VAC/230 VAC
Input Frequency
47-63 Hz
Input Protection
Internal 5 A, 250 V fuse
Input Voltage
90-264 VAC (170-370 VDC)
Inrush Current
30 A at 115 VAC, 60 A at 230 VAC
Isolation
3000 VAC Input to Output
Line Regulation
±0.5% at rated load across input voltage range
Load Regulation
±1% for single output models & V1 & V2 of multi-output models, ±5% for V3 & V4
Minimum Load
Single output models: No minimum load required. Multi-output models, see note 4
MTBF
255 kHrs per MIL-HDBK-217F at +25 °C
Operating Altitude
3000 m
Operating Humidity
5-95% RH, non-condensing
Operating Temperature
0 °C to +70 °C, (see derating curve) Full power to +50 °C
Output Voltage Trim
±10% on output 1 only
Overload Protection
110-130% of max rated load on all O/Ps, trip & restart (Hiccup mode), auto recovery
Overtemperature
Shuts down at +110 °C, auto recovery Protection measured internally
Overvoltage Protection
115-140% on single outputs & V1 of quad output models, recycle input to reset
Power Density
4.96 W/In3
Power Factor
0.99 typical
Remote On/Off
On - Logic Low or Open, Off - Logic High
Remote Sense
Compensates for up to 0.5 V drop
Ripple & Noise
±1% max pk-pk, 20 MHz BW
Short Circuit Protection
Trip and restart (Hiccup mode)
Signals
AC OK, DC OK, Remote On/Off (see control and supervisory signals)
Start Up Delay
2 s typical
Start Up Rise Time
80 ms typical
Storage Temperature
-20 °C to +85 °C
Switching Frequency
120 kHz typical for PFC and PWM
Temperature Coefficient
±0.05%/°C
Transient Response
4% max deviation, recovery to within 1% in 500 µs for a 25% load change
Vibration
2 g, 10 Hz to 55 Hz, 3 mins/cycle for 30 mins each axis
Features
- 200 W with Convection Cooling
- AC OK & DC OK Signals
- Current Share
- High Efficiency - up to 88%
- Meets 1U, Low Profile Requirements
- Remote On/Off & Remote Sense
- Zero Voltage Switching Technology
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the JPS250PQ46?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
XP Power ACS Series 40-60 Watt Power Supply
XP Power AEH130PD01 Power Supplies - Output Power Max: 90 W Voltage Nom: +3.3 V AEH130 Series
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods