Manufacturers
XP POWER JPM80PS07
Description
XP Power JPM80PS07 Power Supply - 80W AC/DC Industrial Type
Part Number
JPM80PS07
Price
Request Quote
Manufacturer
XP POWER
Lead Time
Request Quote
Category
Power Supply
Specifications
Approval Bodies
CE / CSA / EN / TUV / UL
External Depth
179mm
External Length / Height
45mm
External Width
99mm
Height
45mm
Input Frequency
63Hz
Input Voltage
264VAC
85V AC to 264V AC , 120V DC to 370V DC
Input Voltage VAC
85V to 264V
Input Voltage VDC
120V to 370V
Length
179.1mm
No. of Outputs
1
Output Current
10.7A
Output Power
80W
Output Type
Fixed
Output Voltage
7.5V
Power Rating
80W
Power Supply Output Type
Fixed
Power Supply Type
Switch Mode
Supply Frequency Max
63Hz
Supply Frequency Min
47Hz
Supply Voltage
264V
Supply Voltage Max
264V
Supply Voltage Min
85V
Supply Voltage Type
110V AC / 230V AC
SVHC
No SVHC (19-Dec-2011)
Weight
600g
Width
99.1mm
Datasheet
Extracted Text
80-160 Watts xppower.com JPM Series • Low Cost • High Reliability • Power Factor Corrected • Suitable for Battery-charging Applications • Low Ripple & Noise • 125% Rating at 230 VAC • Optional Remote On/Off Specification Input General Input Voltage • 85-264 VAC (120-370 VDC) Efficiency • See tables Input Frequency • 47-63 Hz Isolation • 3000 VAC Input to Output 1500 VAC Input to Ground Input Current • JPM80: 0.7 A max at 230 VAC 500 VAC Output to Ground JPM120: 1.1 A max at 230 VAC JPM160: 1.4 A max at 230 VAC MTBF • >183 kHrs per MIL-HDBK-217F (+25 °C) Inrush Current • 40 A at 230 VAC cold start Power Factor • >0.9 Environmental Earth Leakage Current • <2 mA at 230 VAC Operating Temperature • -10 °C to +60 °C, see derating curves Output Cooling • JPM80 & JPM120 convection-cooled, Output Voltage • See tables JPM160 includes internal fan Output Voltage Trim • +10%, -5% Operating Humidity • 20-90% RH, non-condensing Initial Set Accuracy • ±2% Storage Temperature • -20 °C to +85 °C Start Up Delay • 600 ms max Vibration • 2 g, 10-500 Hz, 10 min/cycle for 60 minutes each axis Start Up Rise Time • 30 ms max Hold Up Time • 25 ms min EMC & Safety Line Regulation • ±0.5% Emissions • EN55022 (CISPR22), level B conducted Load Regulation • See tables EN55022 (CISPR22), level B radiated Ripple & Noise • See tables Harmonic Currents • EN61000-3-2 Overvoltage Protection • 110-135% Vnom, recycle input to reset Voltage Flicker • EN61000-3-3 Overtemperature • Shuts down at +95 °C ±5 °C (measured ESD Immunity • EN61000-4-2, level 3 Perf Criteria A Protection internally) with auto recovery, only on JPM120 & JPM160 Radiated Immunity • EN61000-4-3, 3 V/m Perf Criteria A Overload Protection • 105-150% constant current, auto recovery EFT/Burst • EN61000-4-4, level 2 Perf Criteria A Temperature • ±0.05%/°C Surge • EN61000-4-5, level 3 Perf Criteria A Coefficient Conducted Immunity • EN61000-4-6, level 2 Perf Criteria A Remote On/Off • 4-10 VDC On, <0.8 VDC Off, optional. Magnetic Field • EN61000-4-8, 3 A/m Perf Criteria A Add suffix ‘R’ to model number Dips & Interruptions • EN61000-4-11, 30% 10 ms, 60% 100 ms, >95% 5000 ms, Perf Criteria A, B, B Safety Approvals • EN60950-1-1:2001, UL60950-1, CSA22.2 No. 60950-1, CE Mark LVD AC-DC AC-DC LOAD % (180-264 VAC Input) JPM80 Models and Ratings Output Output Output Ripple & Noise Load Model Efficiency (1,2) Power Voltage Current (pk-pk) Regulation Number 53 W 3.3 V 16.0 A 100 mV ±1.0% 70% JPM80PS03† 80 W 5.0 V 16.0 A 100 mV ±1.0% 76% JPM80PS05† 80 W 7.5 V 10.7 A 100 mV ±1.0% 78% JPM80PS07† 80 W 12.0 V 6.8 A 100 mV ±0.5% 80% JPM80PS12† 80 W 13.5 V 6.0 A 100 mV ±0.5% 80% JPM80PS13† 80 W 15.0 V 5.3 A 100 mV ±0.5% 82% JPM80PS15† 80 W 24.0 V 3.4 A 150 mV ±0.5% 84% JPM80PS24† 80 W 27.0 V 3.0 A 150 mV ±0.5% 83% JPM80PS27† 80 W 48.0 V 1.7 A 250 mV ±0.5% 82% JPM80PS48† Notes 1. Max output increases to 125% of rated power when input voltage is between 180 VAC and 264 VAC - see derating curve below. 2. Mounting vertically increases max ambient temperature. See derating curve. 3. To attach the power supply to a DIN rail, order 2 x DIN CLIP. † Available from Farnell. See pages 204-206. Mechanical Details 7.05 (179.1) All dimensions in inches (mm) 1.00 0.79 4.84 (122.9) Weight: 1.3 lb (600 g) approx. (20.1) (25.4) 1.00 4.6 (116.8) (25.4) 2.36 2.56 (65.0) (60.0) R.C.± 2 x M4 L=5mm J2 LED +V ADJ. 2.01 7 (51.1) 3.11 6 0.37 (79.0) (9.5) 3.90 5 (99.1) J1 4 4.69 1.95 (119.1) 3 (49.5) 0.31 1.5 2 (8.0) (38.1) 1 0.4 (10.2) 0.62 5 x M3 L=3mm (16.0) Function Conn Pin 4 x optional fixing lugs p/n JPMFL 0.6 1 AC Input (15.0) 2 AC Input 0.43 5.59 (142.0) 3 Ground (11.0) 1.00 (25.4) 4 DC Output -V J1 5 DC Output -V 6 DC Output +V 7 DC Output +V 9.5mm pitch M4 barrier strip 0.59 1 Remote Control + (15.0) Opt 2 Remote Control - J2 Molex type 22-23-2021 compatible 0.50 4 x M4 L=6mm (12.7) Derating Curve 100 125 80 100 60 75 40 50 20 25 12 V TO 48 V CONVECTION -10 0 10 20 30 40 50 55 60 (HORIZONTAL) 3 V TO 7 V WITH 18 CFM 55 70 (VERTICAL) 3 V TO 7 V WITH CONVECTION AMBIENT TEMPERATURE ºC LOAD % (85-180 VAC Input) 1.00 (25.4) 1.00 (25.4) 1.77 (45.0) JPM120 Models and Ratings Output Output Output Ripple & Noise Load Model Efficiency (1,2) Power Voltage Current (pk-pk) Regulation Number 79 W 3.3 V 24.0 A 100 mV ±1.0% 67% JPM120PS03† 120 W 5.0 V 24.0 A 100 mV ±1.0% 75% JPM120PS05† 120 W 7.5 V 16.0 A 100 mV ±1.0% 79% JPM120PS07† 120 W 12.0 V 10.0 A 100 mV ±0.5% 80% JPM120PS12† 120 W 13.5 V 8.9 A 100 mV ±0.5% 80% JPM120PS13† 120 W 15.0 V 8.0 A 100 mV ±0.5% 81% JPM120PS15† 120 W 24.0 V 5.0 A 150 mV ±0.5% 83% JPM120PS24† 120 W 27.0 V 4.4 A 150 mV ±0.5% 84% JPM120PS27† 120 W 48.0 V 2.5 A 250 mV ±0.5% 84% JPM120PS48† Notes 1. Max output increases to 125% of rated power when input voltage is between 180 VAC and 264 VAC - see derating curve below. 2. Mounting vertically increases max ambient temperature. See derating curve. 3. To attach the power supply to a DIN rail, order 2 x DIN CLIP † Available from Farnell. See pages 204-206. Mechanical Details 7.83 (198.9) All dimensions in inches (mm) 1.37 0.78 5.24 (133.1) Weight: 1.54 lb (700 g) approx. (19.8) (34.8) 1.00 4.60 (116.8) (25.4) 2.76 2.56 (65.0.) (70.0) R.C.± 2 x M4 L=5mm J2 LED +V ADJ. 2.00 7 (50.8) 3.11 6 0.37 (79.0) (9.5) 3.89 5 (98.8) J1 4 4.69 1.95 (119.1) 3 (49.5) 0.31 1.5 2 (8.0) (38.1) 1 0.40 (10.2) 0.62 5 x M3 L=3mm (16.0) Function Conn Pin 4 x optional fixing lugs p/n JPMFL 0.60 1 AC Input (15.2) 2 AC Input 0.43 3 Ground 5.59 (142.0) (10.9) 4 DC Output -V 1.0 (25.4) J1 5 DC Output -V 6 DC Output +V 7 DC Output +V 9.5mm pitch M4 barrier strip 0.59 1 Remote Control + Opt (15.0) 2 Remote Control - J2 Molex type 22-23-2021 compatible 0.50 4 x M4 L=6mm (12.7) Derating Curve High Line 125 12 V TO 48 V CONVECTION 3 V TO 7 V WITH 18 CFM Low Line 100 75 3 V TO 7 V 50 CONVECTION 25 -10 0 10 20 30 40 45 50 (HORIZONTAL) 45 50 55 (VERTICAL) AMBIENT TEMPERATURE ºC AC-DC LOAD % 1.00 (25.4) 1.00 (25.4) 1.97 (50.0) AC-DC LOAD % (180-264 VAC Input) JPM160 Models and Ratings Output Output Output Ripple & Noise Load Model Efficiency (1,2) Power Voltage Current (pk-pk) Regulation Number 105 W 3.3 V 32.0 A 100 mV ±1.0% 65% JPM160PS03† 160 W 5.0 V 32.0 A 100 mV ±1.0% 71% JPM160PS05† 160 W 7.5 V 21.0 A 100 mV ±1.0% 76% JPM160PS07† 160 W 12.0 V 13.4 A 100 mV ±0.5% 79% JPM160PS12† 160 W 13.5 V 11.8 A 100 mV ±0.5% 80% JPM160PS13† 160 W 15.0 V 10.6 A 100 mV ±0.5% 81% JPM160PS15† 160 W 24.0 V 6.7 A 150 mV ±0.5% 83% JPM160PS24† 160 W 27.0 V 6.0 A 150 mV ±0.5% 83% JPM160PS27† 160 W 48.0 V 3.3 A 250 mV ±0.5% 84% JPM160PS48† Notes 1. Max output increases to 125% of rated power when input voltage is between 180 VAC and 264 VAC and ambient temperature is less than +50 ˚C. 2. To attach the power supply to a DIN rail, order 2 x DIN CLIP. † Available from Farnell. See pages 204-206. Mechanical Details 7.83 (198.9) 0.78 1.37 All dimensions in inches (mm) 5.24 (133.1) (19.8) (34.8) Weight: 1.76 lb (800 g) approx. 1.00 4.60 (116.8) (25.4) 2.75 (69.9) 2.56 (65.0) 2 x M4 L=5mm R.C.± J2 LED +V ADJ. 2.00 7 (50.8) 3.11 6 0.37 (79.0) (9.5) 3.89 5 J1 (98.8) 4 4.69 1.95 (119.1) 3 (49.5) 0.31 1.50 2 (8.0) (38.1) 1 0.40 (10.2) 0.62 5 x M3 L=3mm (16.0) Function Conn Pin 4 x optional fixing lugs p/n JPMFL 0.59 1 AC Input (15.0) 2 AC Input 0.47 3 Ground 5.59 (142.0) (11.9) 4 DC Output -V 1.00 J1 (25.4) 5 DC Output -V 6 DC Output +V 7 DC Output +V 9.5mm pitch M4 barrier strip 0.59 1 Remote Control + Opt (15.0) 2 Remote Control - J2 Molex type 22-23-2021 compatible 0.50 4 x M4 L=6mm (12.7) Derating Curve 100 125 80 100 12 V TO 48 V CONVECTION 60 75 3 V TO 7 V WITH 18 CFM 3 V TO 7 V WITH CONVECTION 50 40 20 25 -10 0 10 20 30 40 50 55 60 AMBIENT TEMPERATURE ºC 17-Apr-07 LOAD % (85-180 VAC Input) 1.00 (25.4) 1.00 (25.4) 1.97 (50.0)
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the JPM80PS07?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
XP Power ACS Series 40-60 Watt Power Supply
XP Power AEH130PD01 Power Supplies - Output Power Max: 90 W Voltage Nom: +3.3 V AEH130 Series
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods