NEW  DESKTOP POWER SUPPLIES  UNIVERSAL INPUT �������  COMPACT ��������� ������������ DESCRIPTION The HUP15 Series of AC-DC switching power supplies provide 15 watts of continuous output power. They are enclosed in a 94V-0 rated polyphenylene oxide case with an IEC 320 inlet connector to mate with an interchangable cord for worldwide use. All models meet CISPR Class B and FCC Class B emission limits, and are approved to UL, CSA, and TUV safety standards. FEATURES 100% Burn-in Built-in EMI filter Small size, light weight Short circuit protection Input surge current protection Wide input voltage 90-264 VAC Approved to UL, CSA, and TUV safety standards CE Mark OUTPUT VOLTAGE/CURRENT RATINGS CHART Output Maximum Output Model Vnom Imin Imax Tol. Power HUP15A-00 3.3V 0A 2.50A 5% 12W HUP15A-10 5V 0A 2.40A 5% 12W HUP15A-10-1 7V 0A 1.70A 5% 15W HUP15A-11 10V 0A 1.50A 5% 15W HUP15A-12 12V 0A 1.25A 5% 15W HUP15A-13 15V 0A 1.00A 5% 15W HUP15A-13-1 18V 0A 0.80A 5% 15W HUP15A-14 24V 0A 0.62A 5% 15W HUP15A-16 30V 0A 0.50A 5% 15W HUP15A-17 36V 0A 0.40A 5% 15W HUP15A-18 48V 0A 0.30A 5% 15W 84 GENERAL SPECIFICATIONS INPUT SPECIFICATIONS All specifications are typical at nominal line, full load, and 25°C. Input voltage: 90 to 264 VAC Efficiency: 60% min at 15W output Input frequency: 47 to 63 Hz Hold-up time: 5msec minimum Input current: 0.4A maximum Line regulation: ±0.5% maximum at full load Safety ground: Inrush current: 15 amps@115 VAC, or leakage current: 0.75mA max. @ 240VAC 50Hz 30 amps@230 VAC at 25°C cold start Withstand voltage: 3000 VAC from input to output 1500 VAC from input to ground OUTPUT SPECIFICATIONS 500 VAC from output to ground Output voltage: See rating chart Insulation resistance: 50 Mohm min. from output to ground Output current: See rating chart Operating temperature: 0°C to +70°C* Output power range: 0 to 15 Watts Storage temperature: –40°C to +85°C Ripple and noise: 1% peak to peak maximum MTBF: 100,000 hours minimum at Overcurrent protection: All outputs protected to short full load at 25°C ambient circuit conditions EMI requirements: Meets conducted and radiated Temperature coefficient: All outputs ±0.04%/°C maximum limits of: Transient response: Maximum excursion of 4% or better a) FCC20780 Level B on all models. Recovers to 1% of b) CISPR 22 Class B final value within 500us after a Safety requirements: Approved to: 25% step load change. a) UL 1950 b) CSA C22.2 No. 234 c) EN60950 * Derate linearly from 100% load at 40°C to 50% load at 70°C MECHANICAL SPECIFICATIONS NOTES: 1. Dimensions shown in inches (mm). 2. Tolerance 0.02 (0.5) maximum. 3. Output connector is 5.5mm outer diameter barrel. Inner diameter is 2.5mm with center positive (+)/outer shell negative(-) polarity. 4. Output cable length is 72.0”. 5. Optional input/output connectors available. Please consult factory. 3.58 (91) 6. Weight: 135 grams approx. + 1.42 (36) 1.50 (38)