Manufacturers
XP POWER HUL200-14
Description
XP Power HUL200-14 Power Supply. Compact size | 200W | 24V Nominal Output
Part Number
HUL200-14
Price
Request Quote
Manufacturer
XP POWER
Lead Time
Request Quote
Category
Power Supply
Specifications
Conducted Immunity
EN61000-4-6, 10 V Perf Criteria B
Dips & Interruptions
EN61000-4-11, 30% 10 ms, 70% 100 ms, 95% 5000 ms, Perf Criteria A, B, B
Efficiency
80% typical
EFT/Burst
EN61000-4-4, level 3 Perf Criteria B
Emissions
EN55022 and FCC, level B (level A - 300 W) conducted
ESD Immunity
EN61000-4-2, level 4 Perf Criteria B
Fan Output
12 V, 300 mA
Harmonic Currents
EN61000-3-2, class B
Hold Up Time
>15 ms at 115 VAC
Humidity
Operating:5-90% RH, non-condensing
Initial Set Accuracy
±1% max for single/main output, ±5% for auxiliary outputs
Input Current
5.0 A max at 115 VAC, 2.5 A max at 230 VAC
Input Frequency
47-63 Hz
Input Voltage
90-132 VAC, 180-264 VAC (auto-ranging)
Inrush Current
35 A at 115 VAC, 70 A max at 264 VAC, +25 ºC cold start
Isolation
3000 VAC Input to Output, 1500 VAC Input to Ground, 500 VAC Output to Ground
MTBF
100 kHrs per MIL-HDBK-217F
Operating Altitude
3000 m
Output Voltage Trim
±5% on output 1
Overload Protection
110-135% of total power, auto recovery
Overtemperature Protection
Shuts down when ambient temperature exceeds +85 °C, auto recovery
Overvoltage Protection
130% on output 1 only, recycle input to reset
Power Density
5.85 W/In3
Power Factor
Passive PFC, meets EN6100-3-2, -3
Power Fail Detect
On equals Logic high 100-500 ms after outputs with regulation; Fail equals Logic low at least 1 ms prior to loss of output
Radiated Immunity
EN61000-4-3, level 3 Perf Criteria B
Remote On/Off
On equals Logic High or Open; Off equals Logic Low or Short
Ripple & Noise
1% pk-pk (50 mV max for 3.3 V output)
Safety Approvals
EN60950, UL60950, CSA22.2 No. 950 per cUL, CE Mark
Short Circuit Protection
Trip and restart (Hiccup mode)
Start Up Delay
1 s max
StartUp Rise Time
20 ms max
Surge
EN61000-4-5, level 3 Perf Criteria B
Switching Frequency
42 kHz typical
Temperature
Operating:0°C to +60 °C, derate linearly from 100% at +40 °C to 50% at +60 °C; Storage:-20 °C to +85 °C
Temperature Coefficient
±0.1% / °C
Total Regulation
±1% max for single output models, ±5% max for multiple output models
Transient Response
5% max. deviation, recovery to within 1% in 500 µsfor a 50% load change
Vibration
5 Hz to 50 kHz, 7.35 m/s2 on 3 axis
Voltage Flicker
EN61000-3-3 amendments 1 & 2
Features
- Compact Size, Low Profile
- Convection-Cooled Ratings
- International Safety Approvals
- Power Fail Detect
- Remote On/Off
- Single and Multiple Outputs
- Up to 5.85 W/in3 Power Density
Datasheet
Extracted Text
175-300 Watts xppower.com HUL Series • Compact Size, Low Profile 3 • Up to 5.85 W/in Power Density • Single & Multiple Outputs • Convection-cooled Ratings • Remote On/Off • Power Fail Detect • 12 V Fan Supply Specification Input General Input Voltage • 90-132 VAC, 180-264 VAC (auto-ranging) Efficiency • 80% typical Input Frequency • 47-63 Hz Isolation • 3000 VAC Input to Output, 1500 VAC Input to Ground, Input Current • HUL175: 4.4 A max at 115 VAC, 500 VAC Output to Ground 2.2 A max at 230 VAC HUL200: 5.0 A max at 115 VAC, Switching Frequency • 42 kHz typical 3 3 2.5 A max at 230 VAC Power Density • HUL175: 4.51 W/In , HUL200: 5.85 W/In , 3 HUL300: 6.3 A max at 115 VAC, HUL300: 4.41 W/In 3.15 A max at 230 VAC Power Fail Detect • On = Logic high 100-500 ms after outputs Inrush Current • 35 A at 115 VAC, 70 A max at 264 VAC with regulation +25 °C cold start Fail = Logic low at least 1 ms prior to loss Power Factor • Passive PFC, meets EN6100-3-2, -3 of output Earth Leakage Current • <1.5 mA at 230 VAC / 50 Hz MTBF • 100 kHrs per MIL-HDBK-217F Output Environmental Output Voltage • See tables Operating Temperature • 0 °C to +60 °C, derate linearly from 100% Output Voltage Trim • ±5% on output 1 at +40 °C to 50% at +60 °C Initial Set Accuracy • ±1% max for single/main output Cooling • See notes ±5% for auxiliary outputs Operating Humidity • 5-90% RH, non-condensing Minimum Load • See tables & note 1 for 175 W model Storage Temperature • -20 °C to +85 °C Start Up Delay • 1 s max Operating Altitude • 3000 m Start Up Rise Time • 20 ms max Shock • 15 g (non-operation), 11 ms (half sine Hold Up Time • >15 ms at 115 VAC wave), 3 times for each axis Total Regulation • ±1% max for single output models, Vibration • 10-55 Hz (non-operation) 2 g, sweep time ±5% max for multiple output models 3 mins, 60 mins/axis Over/Undershoot • <5% max EMC & Safety Transient Response • 5% max deviation, recovery to within 1% in 500 µs for a 50% load change Emissions • EN55022 and FCC, level B Ripple & Noise • 1% pk-pk (50 mV max for 3.3 V output) (level A - 300 W) conducted Overvoltage Protection • 130% on output 1 only, recycle input to Harmonic Currents • EN61000-3-2 reset Voltage Flicker • EN61000-3-3 Overtemperature • Shuts down when ambient temperature ESD Immunity • EN61000-4-2, level 4 Perf Criteria A Protection exceeds +85 °C, auto recovery Radiated Immunity • EN61000-4-3, level 3 Perf Criteria A Overload Protection • 110-135% of total power, auto recovery EFT/Burst • EN61000-4-4, level 3 Perf Criteria A Short Circuit Protection • Trip and restart (Hiccup mode) Surge • EN61000-4-5, level 3 Perf Criteria A Temperature • ±0.1%/°C Conducted Immunity • EN61000-4-6, 10 V Perf Criteria A Coefficient Dips & Interruptions • EN61000-4-11, 30% 10 ms, Remote Sense • HUL175 only. Compensates for 0.5 V drop 70% 100 ms, 95% 5000 ms, on 3.3 V output Perf Criteria A, B, B Remote On/Off • On = Logic High or Open Safety Approvals • EN60950, UL60950, CSA22.2 No. 950 Off = Logic Low or Short per cUL, CE Mark Not available on HUL175 Fan Output • 12 V, 300 mA AC-DC AC-DC HUL175 Models and Ratings Output 1 Output 2 Output 3 Output 4 Model Voltage Conv Max Voltage Conv Max Voltage Conv Max Voltage Conv Max Number Nom Cooled 18.7 CFM Nom Cooled 18.7 CFM Nom Cooled 18.7 CFM Nom Cooled 18.7 CFM 5.0 V 10.0 A 15.0 A 3.3 V 10.0 A 20.0 A 12.0 V 2.2 A 3.0 A -5.0 V 0.7 A 1.0 A HUL175-40-3† 5.0 V 10.0 A 15.0 A 3.3 V 10.0 A 20.0 A 12.0 V 2.2 A 3.0 A -12.0 V 0.7 A 1.0 A HUL175-42-3† 5.0 V 10.0 A 15.0 A 3.3 V 10.0 A 20.0 A 24.0 V 1.5 A 2.0 A -12.0 V 0.7 A 1.0 A HUL175-45-3† 5.0 V 10.0 A 15.0 A 3.3 V 10.0 A 20.0 A 15.0 V 2.2 A 3.0 A -15.0 V 0.7 A 1.0 A HUL175-46-3† Notes 1. Minimum load is 2.0 A for V1, 0.0 A for V2 & V4, and 0.3 A for V3. 2. Total regulation for V1, V2 and V3 = ±5%; V4 = ±3%. Total regulation includes tolerance, line regulation and load regulation. 3. Total combined output power for the 3.3 V and 5.0 V not to exceed 126 W with 18.7 CFM or 70 W with convection cooling. 4. Maximum load continuous output power is 175 W with minimum 18.7 CFM forced air cooling or 100 W with convection cooling. 5. Outputs are fully isolated. † Available from Farnell. See pages 204-206. Mechanical Details All dimensions are in inches (mm). Tolerance: 0.02 (0.5) max. Weight: 1.32 lbs (600 g) approx. 0.65 0.2 (16.5) (5.1) B M3 x 0.5 STAND OFF 4 PLACES 2 P2 1 A M4 x 0.7 NUT FASTENER 8 PLACES 24 3.80 P1 (96.5) G N P3 2.50 L (63.5) 1 P2 Connector A Pin Function 1 Fan + 2 Fan - B 6.40 (162.5) P3 Connector Pin Function 1 +3.3 V Sense+ 4.58 (116.3) 2, 14 Output 2 2.90 (73.7) 3, 15 Output 2 0.80 4, 16 Return (20.3) 5, 17 Return 6, 18 Return A A 7, 19 Output 1 1.50 8, 20 Output 1 1.25 (38.1) 9, 21 Output 3 (31.8) 10, 22 Return 11,23 Output 4 12 Power Fail Detect 5.20 (132.1) 0.24 13 +3.3 V Sense- 6.00 (152.4) (6.00) 24 Return 6.80 (172.7) Notes 1. Input connector P1 mates with Molex housing 09-91-0500 and Molex 2478/2578/8818 series crimp terminal. 2. Output connector P3 mates with Molex housing 39-01-2240 and Molex 44476 series crimp terminal. 3. Fan connector P2 mates with JST housing XHP-2 and JST SXH-002T-P0.6 crimp terminals. Fan output is 12 V/160 mA. 4. Covered versions are available, add suffix: ‘-C’ to model number for cover only, dimensions: 3.80” x 6.80” x 1.66” (96.5 x 172.7 x 42.1 mm), add suffix: ‘-FC’ to model number for fan cover, dimensions: 3.80” x 6.80” x 2.48” (96.5 x 172.7 x 63.0 mm). 5. Cable harnesses with 11.81” (300 mm) wire available, order part HUL175 LOOM KIT†. For mating connectors only, order part HUL175 CONN KIT†. 6. Covers are available separately. Order part HUL175 COVER† or HUL175 F/COVER† for Fan Cover. 7. Max penetration of screws 0.12” (3.0 mm). HUL200 Models and Ratings (3) Output 1 Output 2 Output 3 Output 4 Model Current Current Current Current Voltage Voltage Voltage Voltage (1) Number Nom Min Max Nom Min Max nom Min Max nom Min Max 3.3 V 0.5 A 30.0 A HUL200-10-1† 5.0 V 0.5 A 40.0 A HUL200-10† 12.0 V 0.5 A 16.7 A HUL200-12† 15.0 V 0.5 A 13.3 A HUL200-13† 24.0 V 0.5 A 8.3 A HUL200-14† 48.0 V 0.5 A 4.1 A HUL200-18† +5.0 V 0.5 A 20.0 A +12.0 V 0.0 A 8.0 A HUL200-23† +5.0 V 0.5 A 20.0 A +15.0 V 0.0 A 6.6 A HUL200-24† +5.0 V 0.5 A 20.0 A +24.0 V 0.0 A 4.2 A HUL200-25† +5.0 V 0.5 A 20.0 A +12.0 V 0.0 A 8.0 A F 12.0 V 0.0 A 1.0 A HUL200-31† +5.0 V 0.5 A 20.0 A +15.0 V 0.0 A 5.0 A F 15.0 V 0.0 A 1.0 A HUL200-32† +5.0 V 0.5 A 20.0 A +12.0 V 0.0 A 6.0 A -5.0 V 0.0 A 1.0 A F 12.0 V 0.0 A 1.0 A HUL200-40† +5.0 V 0.5 A 20.0 A +24.0 V 0.0 A 3.0 A -12.0 V 0.0 A 1.0 A F 12.0 V 0.0 A 1.0 A HUL200-45† +5.0 V 0.5 A 20.0 A +15.0 V 0.0 A 5.0 A -5.0 V 0.0 A 1.0 A F 15.0 V 0.0 A 1.0 A HUL200-46† +12.0 V 0.5 A 3.0 A +36.0 V 0.0 A 5.0 A +5.0 V 0.0 A 3.0 A -12.0 V 0.0 A 1.0 A HUL200-47 +5.0 V 0.5 A 5.0 A +36.0 V 0.0 A 2.5 A +12.0 V 0.0 A 1.0 A -12.0 V 0.0 A 1.0 A HUL200-47-2 +5.0 V 0.5 A 3.0 A +24.0 V 0.0 A 8.0 A +12.0 V 0.0 A 0.1 A -12.0 V 0.0 A 0.1 A HUL200-47-3 +5.0 V 0.5 A 5.0 A +12.0 V 0.0 A 2.5 A +24.0 V 0.0 A 2.5 A -12.0 V 0.0 A 1.0 A HUL200-47-1 Notes 1. Use part number UL200-XX for product without harmonic correction. e.g.: UL200-10. 2. Total output power for HUL200-10-1 is 73 W convection-cooled, 100 W with 18.7 CFM forced air cooling. 3. Output 4 is floating except for -47 models. It can be connected externally for positive or negative output. 4. Total output power for HUL200 single output models is 150 W convection-cooled, 200 W with 18.7 CFM forced air cooling. 5. Total output power for HUL200 multi output models is 100 W convection-cooled, 200 W with 18.7 CFM forced air cooling. 6. Tolerance 5% all outputs, except single output units - tolerance 2%. † Available from Farnell. See pages 204-206. Mechanical Details All dimensions are in inches (mm). Tolerance: 0.02 (0.5) max. Weight: 1.76 lbs (800 g) approx. 1.25 2.5 (63.5) (31.8) P2 Connector Mounting holes: L N G Pin Single Output Multi Output A: M4 x 0.7, 8 places A A 1 B B: 6-32, 8 places 1 Output 1 Output 3 P1 B B 2 Output 1 Return A 3 Output 1 Return 4 Output 1 Return 5 Output 1 Return 6 Output 1 Output 1 6.40 (162.5) 7 Return Output 1 5.77 8 Return Output 1 (146.7) 9 Return Output 1 6.80 10 Return Output 2 (172.7) 11 Return Output 4 12 Return Output 4 Return P3 Connector Pin Single Output Multi Output A 1 Fan + Multi-outputs have 3 B FAN B P2 separate 2 pin B P3 2 Return connectors for Fan, A 3 Return A Pin 1 Pin 1 Power Good and Remote 1.27 3.80 (96.5) 4 Power Fail Detect (32.3) ±0.3 (7.6) ON/OFF. These are (7) 5 Remote On/Off clearly marked on the 1.50 6 Return - PCB. (38.1) Notes 1. Input connector P1 mates with Molex housing 09-91-0500 and Molex 2478/2578/8818 series crimp terminal. 2. Output connector P2 mates with Molex housing 09-91-1200 and Molex 2478/2578/8818 series crimp terminal. 3. Fan connector mates with JST housing XHP-2 and JST SXH-002T-P0.6 crimp terminals. 4. Signals connector P3 mates with JST housing XHP-6 and JST SXH-002T-P0.6 crimp terminals or 3 off JST housing XHP-2 and JST SXH-002T-P0.6 crimp terminals. 5. Covered versions are available: add suffix: ‘-C’ to model number for cover only - dimensions: 3.80” x 6.80” x 1.66” (96.5 x 172.7 x 42.1 mm), add suffix: ‘-FC’ to model number for fan cover - dimensions: 3.80” x 6.80” x 2.48” (96.5 x 172.7 x 63.0 mm). 6. Covers are available separately. Order part HUL200 COVER† or HUL200 F/COVER† for Fan Cover. 7. Output is turned off by taking the Remote On/Off pin low (connect to Return). 8. Cable harnesses with 11.81” (300 mm) wire available, order part number HUL200 LOOM-S for single output models, HUL200 LOOM-D for dual output models, HUL200 LOOM-T for triple output models or HUL200 LOOM-Q for quad output models. 9. For mating connectors only, order part HUL200 CON KT†. 10. Max penetration of screws 0.12” (3.0 mm) AC-DC AC-DC HUL300 Models and Ratings (2) Output 1 Output 2 Output 3 Output 4 Model Current Current Current Current Voltage Voltage Voltage Voltage (1) Number Nom Min Max Nom Min Max nom Min Max nom Min Max 3.3 V 0.5 A 60.00 A HUL300-10-1† 5.0 V 0.5 A 60.00 A HUL300-10† 12.0 V 0.5 A 25.00 A HUL300-12† 15.0 V 0.5 A 20.00 A HUL300-13† 24.0 V 0.5 A 12.50 A HUL300-14† 48.0 V 0.5 A 6.25 A HUL300-18† +5.0 V 0.5 A 30.00 A +12.0 V 0.0 A 12.5 A HUL300-23† +5.0 V 0.5 A 30.00 A +15.0 V 0.0 A 10.0 A HUL300-24† +5.0 V 0.5 A 30.00 A +24.0 V 0.0 A 6.3 A HUL300-25† +5.0 V 0.5 A 30.00 A +12.0 V 0.0 A 10.5 A F 12.0 V 0.0 A 2.0 A HUL300-31† +5.0 V 0.5 A 30.00 A +15.0 V 0.0 A 8.0 A F 15.0 V 0.0 A 2.0 A HUL300-32† +5.0 V 0.5 A 30.00 A +12.0 V 0.0 A 10.0 A -5.0 V 0.0 A 2.0 A F 12.0 V 0.0 A 2.0 A HUL300-40† +5.0 V 0.5 A 30.00 A +24.0 V 0.0 A 4.3 A -12.0 V 0.0 A 2.0 A F 12.0 V 0.0 A 2.0 A HUL300-45† +5.0 V 0.5 A 30.00 A +15.0 V 0.0 A 7.4 A -5.0 V 0.0 A 2.0 A F 15.0 V 0.0 A 2.0 A HUL300-46† Notes 1. Use part number UL300-XX for product without harmonic correction. e.g. UL300-10. 2. Output 4 is floating. It can be connected externally for positive or negative output. 3. Total output power for HUL300-12,13,14,18 models is 200 W convection-cooled, 300 W with 30 CFM forced air cooling. 4. Total output power for all other HUL300 models is 150 W convection-cooled, 300 W with 30 CFM forced air cooling. 5. Tolerance 5% all outputs, except single output units - tolerance 2%. † Available from Farnell. See pages 204-206. Mechanical Details All dimensions are in inches (mm). Tolerance: 0.02 (0.5) max. Weight: 2.20 lbs (1.0 kg) approx. 0.25 (6.35) 2.50 (63.5) P2 Connector 0.50 P1 (12.7) Pin Single Output Multi Output 1.09 L N G (27.8) 1 Output 1 Output 3 2 Output 1 Output 1 3 Output 1 Output 1 M4 x 0.7 NUT FASTENER (12 PLACES) 4 Output 1 Output 1 5 Output 1 Output 1 6 Output 1 Return 8.00 (203.2) 7 Output 1 Return 7.50 8 Return Return (190.5) 7.00 (177.8) 9 Return Return 5.81 10 Return Return (147.6) 11 Return Output 2 12 Return Output 2 13 Return Output 4 14 Return Output 4 Return P3 Connector Pin Single Output Multi Output 1 Fan + Return (7) 2 Return DC OK P3 3 DC OK Return PIN 1 P2 (6) 4 Power Fail Detect Remote On/Off (6) 1 14 FAN 5 Remote On/Off Return 1.00 0.25 6 Return Power Fail Detect 4.25 (108.0) (25.4) (6.4) 2.00 (50.8) Notes 1. Input connector P1 mates with Molex housing 09-91-0500 and Molex 2478/2578/8818 series crimp terminal. 2. Output connector P2 mates with Molex housing 09-91-1400 and Molex 2478/2578/8818 series crimp terminal. 3. Fan connector mates with JST housing XHP-2 and JST SXH-002T-P0.6 crimp terminals. Multiple outputs only. 4. Signals connector P3 mates with JST housing XHP-6 and JST SXH-002T-P0.6 crimp terminals. 5. Covered versions are available, add suffix: ‘-C’ to model number for cover only, dimensions: 4.25” x 8.00” x 2.16” (108.0 x 203.2 x 54.8 mm) add suffix: ‘-FC’ to model number for fan cover, dimensions: 4.25” x 8.00” x 3.00” (108.0 x 203.2 x 75.7 mm). 6. Output is turned off by taking the Remote On/Off pin low (connect to Return). 7. DC OK is a open collector output. Low = normal operation. 8. Cable harnesses with 11.81” (300 mm) wire available, order part number HUL300 LOOM-S for single output models, HUL300 LOOM-D for dual output models, HUL300 LOOM-T for triple output models or HUL300 LOOM-Q for quad output models. For mating connectors only, order part HUL300 CON KT†. 9. Covers are available separately. Order part HUL300 COVER† or HUL300 F/COVER† for Fan Cover. 10. Max penetration of screws 0.12” (3.0 mm). 17-Apr-07
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the HUL200-14?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
XP Power ACS Series 40-60 Watt Power Supply
XP Power AEH130PD01 Power Supplies - Output Power Max: 90 W Voltage Nom: +3.3 V AEH130 Series
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods