VMIC VMIVME-Repeat L
Features
- Allows expansion to 19 x 19 slots using 20-slot backplanes in a star configuration
- DIN-type I/O connectors
- Double Eurocard form factor
- Links include one model REPEAT M, one model REPEAT S, and a variety of cable lengths
- Propagation delay is approximately 150 ns
- Repeats VMEbus P1 and P2
- Supports 16-, 24-, and 32-bit addressing
- Supports 8-, 16-, 32-bit transfers
- Supports all seven interrupt levels
- Supports up to 50-foot cables
- Supports VMEbus slaves on a slave-only VMEbus
Datasheet
Extracted Text
VMIVME-REPEAT L VMEbus Repeater Link • Supports 8-, 16-, 32-bit transfers • Supports 16-, 24-, and 32-bit addressing • Repeats VMEbus P1 and P2 • Propagation delay is approximately 150 ns • Supports all seven interrupt levels • Supports VMEbus slaves on a slave-only VMEbus • Supports up to 50-foot cables • Allows expansion to 19 x 19 slots using 20-slot backplanes in a star conŢguration • Double Eurocard form factor • DIN-type I/O connectors • Links include one model REPEAT M, one model REPEAT S, and a variety of cable lengths REPEATER LINK OVERVIEW — The VMIVME-REPEAT L is a two-board set which allows VMEbus slave I/O boards residing in one VMEbus chassis to be controlled by a VMEbus master residing in another chassis. The VMEbus chassis in which VMEbus masters reside is referred to as a master chassis, while the VMEbus slave PHYSICAL/ENVIRONMENTAL boards reside in a slave chassis. The two-board set is Temperature Range: 0 to 55 °C, operating configured as shown in Figure 1 with one board designated for -20 to 85 °C, storage the master chassis while the other board is designated for the slave chassis. A master VMEbus chassis can communicate Relative Humidity Range: 20 to 80 percent, with several slave chassis by using multiple noncondensing VMIVME-REPEAT Links, as shown in Figure 2. Cooling: Convection The VMIVME-REPEAT Link supports all seven interrupt levels. Interrupts are acknowledged by the IACKIN*/IACKOUT* daisy chain which is routed through all of the slave chassis slots before going on to the next VMEbus master chassis slot. Thus, any slot in the slave Ordering Options chassis can generate an interrupt. June 7, 1999 800-00REPL-000 E VMIVME-REPEAT L SPECIFICATIONS REPEAT L-xx: Includes a REPEAT M, REPEAT S, and three cable assemblies, xx ft long • Supports 8-, 16-, and 32-bit data transfers Standard Links: REPEAT L-05 REPEAT L-10 • Supports 16-, 24-, and 32-bit addressing REPEAT L-25 REPEAT L-50 • Supports all seven interrupt levels For Nonstandard Links, Order: REPEAT M and REPEAT S, plus three each cable assemblies • Supports bus slaves and interrupters in slave chassis Cable Requirements • Propagation delay is approximately 150 ns with 5-foot Cable may be ordered from VMIC according to the following model numbers. Three each cables (add 4 ns per foot for longer cables) are requried. Description Model Number • Allows expansion to 19 x 19 slots using 20-slot Cable Assembly - 5 ft VMIVME-000-64-005 backplanes in a star expansion conŢguration Cable Assembly - 10 ft VMIVME-000-64-010 Cable Assembly - 25 ft VMIVME-000-64-025 Cable Assembly - 50 ft VMIVME-000-64-050 • DIN format connectors Connector Data • Inexpensive ribbon-cable interconnects Compatible Cable Connector Panduit No. 120-964-435 Strain Relief Panduit No. 100-000-072 • PC Board Header Connector Panduit No. 120-964-033A • 50-foot maximum cable length Note • Double Eurocard form factor Panduit is also known as ITW/Pancon. For Ordering Information, Call: • Low power consumption 1-800-322-3616 or 1-256-880-0444 • FAX (256) 882-0859 E-mail: info@vmic.com Web Address: www.vmic.com • VMIVME-REPEAT S must be installed in slot 1 of the Copyright © January 1986 by VMIC Specifications subject to change without notice. VMEbus slave chassis VMIC • 12090 South Memorial Parkway ¥ Huntsville, Alabama 35803-3308 1 VMIVME-REPEAT L Power Requirements: TRADEMARKS REPEAT M: 5 V at 0.977 mA The VMIC logo is a registered trademark of VMIC. REPEAT S: 5 V at 1.029 mA Other registered trademarks are the property of their MTBF: 242,000 hours (217F) respective owners. The VMIVME-REPEAT Link buses the following VMEbus signals: D00 to D31 WRITE* SYSFAIL* A01 to A31 SYSRESET* BERR* DS0* SYSCLK DTACK* DS1* LWORD* IRQ1* to IRQ7* AS* IACK* GND 1. IACKIN* is daisy chained through the slave chassis and 1 AM0 to AM5 IACKOUT* IACKIN back to the master bus. I/O GLOBAL CPU SLAVE MEMORY VMEbus MASTER CHASSIS I/O REPEAT M SLAVE SLOT 1 THREE 64-CONDUCTOR FLAT-RIBBON CABLES REPEAT S SLAVE CHASSIS VMEbus I/O I/O I/O SLAVE SLAVE SLAVE Figure 1. Typical VMEbus Configuration Using the VMIC VMIVME-REPEAT Link 2 For Ordering Information, Call: 1-800-322-3616 or 1-256-880-0444 ¥ FAX (256) 882-0859 VMIVME-REPEAT L I/O CPU MASTER MASTER VMEbus REPEAT M REPEAT M REPEAT M REPEAT S REPEAT S SLAVE VMEbus SLAVE VMEbus REPEAT S SLAVE VMEbus Figure 2. Multiple Slave I/O Chassis SLOT 1 MASTER VMEbus CHASSIS IACKIN*/IACKOUT DAISY CHAIN VMIVME-REPEAT M CONNECTION VIA FLAT-RIBBON CABLES SLAVE VMEbus CHASSIS VMIVME-REPEAT S Figure 3. Interrupt Daisy Chain Structure VMIC ¥ 12090 South Memorial Parkway ¥ Huntsville, Alabama 35803-3308 3
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the VMIVME-Repeat L?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods