VMIC IOP-PMC-05000-A
Description
ARTIC 4-Port T1/E1/J1 DSP PMC (front and rear I/O)
Part Number
IOP-PMC-05000-A
Price
Request Quote
Manufacturer
VMIC
Lead Time
Request Quote
Category
Mezzanine Cards
Datasheet
ARTIC DSP PCI_DS_71-17004013322.pdf
171 KiB
Extracted Text
ARTIC DSP PCI MEZZANINE CARD 4-Port T1/E1/J1 DSP PCI Mezzanine Card The ARTIC 4-Port T1/E1/J1 DSP PCI Mezzanine Card is a single non-extended PCI Mezzanine Card (PMC) sized daughtercard designed for use with PMC compatible base adapters. This PMC provides OEMs, integrators, and end-users with four ports of 1.544Mbps (T1) or 2.048Mbps (E1) compatible interfaces which will process data to FEATURE SUMMARY and from the host system or route data between the ports. Four T1/E1/J1 line interfaces, The ARTIC 4-Port T1/E1/J1 DSP PMC can route channels between the four T1/E1/J1 ports and can process the electronically configurable data of any channel of a T1/E1/J1 port up to 128 channels. The ARTIC 4-Port T1/E1/J1 DSP PMC has four RJ-48 Texas Instruments TMS320C62x connectors for attachment to a user-supplied cable. DSP (6203) complexe The Texas Instruments 'C6X DSP complex, operating at 250MHz, 2000MIPS, handles data manipulation and low 250MHz, 2000MIPS level communications protocols. Its processing power allows protocol execution directly on the PMC without 512KB external SBSRAM (1MB-2MB options available) utilizing host bandwidth. By offloading the low-level communications activity from the host, overall system performance can be increased. 32-bit PCI, PMC interface H.100 support via H.100 TDM The ARTIC 4-Port T1/E1/J1 DSP PMC can also route H.100 TDM data through the H.100 interface connector switch & H.100 interface and H.100 TDM switch. It can also transfer H.110 data when mated with a CompactPCI base adapter. connector An 8-port Rear Transition Module (RTM) specially designed to be used with this PMC and the ARTIC 1000 H.110 support via attachment to CompactPCI I/O Platform is also available. This RTM supports up to two ARTIC 4-Port T1/E1/J1 DSP PMC's and CompactPCI base adapter Single PMC form factor provides rear-panel I/O with rear panel access to eight T1/E1/J1 ports and two independent 10/100BaseTX Front I/O and rear I/O via rear Ethernet ports. transition module The ARTIC 4-Port T1/E1/J1 DSP PMC is ideal for processor-intensive telephony applications such as those found Rear transition module in telecom switching equipment, including SS7, ATM over T1 as well as high-speed wide area networking Allows up to two PMCs to be protocols such as Frame Relay and HDLC. attached CSU/DSU capability Two base card Ethernet ports ARTIC DSP PCI MEZZANINE CARD DATA SHEET | © 2006 RadiSys Corporation | ID: 09-13-2006 1 | Page 1 of 3 ARTIC DSP PCI Mezzanine Card Specifications FEATURE FUNCTION DESCRIPTION Board Style - Single non-extended PMC Board Size Length 149mm (5.87") Width 74mm (2.91") RTM Size Length x Width 233mm (9.18") x 80mm (3.14") Environment Operating Temp. 0° to 55°C Humidity 5 - 95% Power Requirements +3.3 V DC 1.0 A max Protocol Support - SS7 MTP-2, HSL, Frame Relay, Async, Bisync Connectors T1/E1/J1 cables Four RJ-48 H.100 H.100 Connector Regulatory Conformance Safety US: UL 1950 Conformance Canada: CSA CS03 C22.2 No950-M89 or M93 Europe: EN60950 2nd Edition + A1/A2/A3/4 ETS300-046 Parts 1 & 3 Australia: TS001 AS/NSZ 3260 + A1/A2/3/4 including TNV Belgium: As Europe + EN41003 Japan: UL 1950 EN60950 2nd Edition +A1/A2/A3 EMC US: FCC Part 15 Class A Canada: FCC Part 15 Class A Europe: EN 55022, EN 50082-1 (1996) Australia: EN 55022, EN 50082-1 (1996) Belgium: EN 55022, EN 50082-1 (1996) Japan: VCCI-A Telecom US: FCC Part 68, ANSI T1.403 Canada: RFCC Part 68 Europe: CTR 12/13 (G.703/704 tests), ETS 300-246/247/248/418/419/420 Australia: TS016 ARTIC DSP PCI MEZZANINE CARD DATA SHEET | © 2006 RadiSys Corporation | ID: 09-13-2006 1 | Page 2 of 3 Ordering Information Toll-Free: 800-950-0044 Phone: 503-615-1100 Support: 866-385-6167 Contact Information Call for pricing and availability. Refer to the order codes below. Description: www.radisys.com info@radisys.com ARTIC 4-Port T1/E1/J1 DSP PMC Channels and other locations (front and rear I/O) ORDER CODE: IOP-PMC-05000-A ARTIC 4-Port T1/E1/J1 DSP PMC World Headquarters (rear I/O only) ORDER CODE: IOP-PMC-01000 5445 NE Dawson Creek Dr. Hillsboro, OR 97124 USA Rear Panel Transition Modules (RTM) Phone: 503-615-1100 Fax: 503-615-1121 ARTIC 8-Port T1/E1/J1 2 LAN Rear I/O RTM Toll-Free: 800-950-0044 ORDER CODE: IOP-RTM-00100 Support: 866-385-6167 2006 RadiSys Corporation. RadiSys is a registered trademark of RadiSys Corporation. Convedia, Microware and OS-9 are registered trademarks of RadiSys Corporation. Promentum, and Procelerant are trademarks of RadiSys Corporation. *All other trademarks are the properties of their respective owners. All specifications within this document are subject to change without notice. ARTIC DSP PCI MEZZANINE CARD DATA SHEET | © 2006 RadiSys Corporation | ID: 09-13-2006 1 | Page 3 of 3
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the IOP-PMC-05000-A?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods