TEXAS MICRO 92-005346-0X
Specifications
Battery
Built-in lithium battery for ten years of data retention for CMOS memory
BIOS
AMI WinBIOS with built-in advance CMOS setup
Board Type
Full Size
Bus Interface
PCI/ISA
Bus Speeds
ISA: 8MHz; PCI: 25MHz - 75MHz CPU; PCI: 30MHz - 90, 120, 150 MHz CPU; PCI: 33MHz - 100, 133, 166 MHz CPU
Cache Memory
64-bit L2 cache supports 256K direct mapped write-back cache policy with synchronous burst SRAMS
CPU Support
Intel Pentium 75/90/100/120/133/150/166 MHz
Data Paths
Data/Memory: 64-bit; ISA: 16-bit; PCI: 32-bit
DMA Channels
Fully PC Compatible with 7 DMA channels, each supporting type F transfers
DRAM Memory
64-bit path supporting 256MB of fast page mode memory. All 256MB is cacheable
Enhanced Bi-Directional Parallel Interface
Compatible with PC/AT bi-directional parallel port and supports EPF and ECP modes.
Floppy Drive Interface
Supports up to 2 floppy disk drives
IDE Interface
Supports up to 2 IDE disk drives in master/slave configuration
Keyboard Interface
Compatible with AT type keyboards
Mean Time Between Failures (MTBF)
92,000 POH (Power On Hours)
Memory Holes
Supports 1MB memory hole option at 15-16MB
Parity Checking
Included in DRAM interface
PCI Fast SCSI-2 Interface
Supports fast SCSI data transfer up to 10MB/s and bursts to full PCI speeds
PCI Local Bus Interface
Fully compliant with PCI Local Bus 2.0 Specification with peak transfer rates of 132MB/s. Supports 4 PCI masters with full concurrence between CPU host and PCI bus transactions
Power Fail Detection
Issues a hardware reset when on-board voltage drops below 4.75 volts
Power Requirements
+5V - 3.5 Amps typical; +12V -
Processor
Intel Pentium 90
Serial Interface
2 high-speed FIFO serial ports with independantly programmable baud rates
Temperature
0º-60ºC Operating; -40º-70ºC Storage
Watchdog Timer
Software controlled watchdog timer monitors system activity and generates a reset pulse in the event of a timeout
Features
- 64-bit DRAM interface that supports up to 256MB of fast page mode memory. Supports 70ns industry standard 36-bit wide gold finger SIMM DRAM in four 72-pin SIMM sockets. All 256MP is cacheable.
- 65-bit wide second level (L2) cache supports 256K direct mapped write-back cache policy with synchronous burst SRAMs.
- AMI WinBIOS with built-in advanced CMOS setup for system parameters, peripheral management for configuring on-board peripherals, PCI-to-PCI bridge support, and PCI interrupt steering.
- Enhanced Bi-Directional Parallel Interface
- Enhanced IDE Interface
- Floppy Drive Interface
- Fully PC compatible with seven DMA channels, each supporting type F transfers
- ISA & PCI Local Bus compatible. Internal 24mAmp drivers for supporting up to 20-slot backplanes
- Keyboard Interface
- Parity checking included in DRAM interface
- PCI Fast SCSI-2 Interface
- Power Fail Detection
- Serial Interface (2 high-speed FIFO serial ports)
- Supports a 1MB memory hole option at 15-16MB
- Supports Intel Pentium 75/90/100/120/133/150/166 MHz CPUs
- Watchdog Timer
- Windows NT Compatible
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the 92-005346-0X?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
Related Products

TRENTON 20-005601-04 CPU Board with Intel Pentium II (P2) Slot1, Intel 300MHz processor, Fan, 128MB ...

TRENTON 506675-146 MCGI (Single CPU, Standard Configuration) System Host Board. Single Board Compute...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods