TSX Series Modicon Manuals Presented by: Modicon PLC Schneider Electric | Quantum | Modicon | Gould | Gettys For Product Needs: Email: sales@modiconplc.com Call: 1-800-691-8511 Fax: 919-415-1614 ModiconPLC.com Schneider Electric | Quantum | Modicon | Gould | Gettys | ModiconPLC.com Selection guide Modicon TSX Micro automation platform 0 Phaseo power supplies for d.c. control circuits Functions Supplies for d.c. control circuits Type of product Single-phase, modular Single-phase, regulated switch mode power supplies switch mode power supplies 2 Applications Industrial, commercial or Simple, Industrial Industrial or residential applications. low power applications, commercial Modular format allowing equipment. low and medium applications on 2.3 integration into panels. power. sites sensitive to Machine mains interference. equipment Protection against applications. accidental restarting. Nominal power 22 W 30 W 7 W…30 W 48…240 W 60…240 W Input voltage a 100…240 V single-phase a 100…240 V a 100…240 V a 100…240 V single-phase single-phase single-phase, c 110…220 V c 110…220 V compatible (1) compatible (1) Output voltage c 12 V c 24 V c 24 V c 24 V c 12, 24 V or adjustable adjustable adjustable adjustable 48 V adjustable Technology Primary switch mode electronic power supplies. Secondary protection Integrated, against overloads and short-circuits, with automatic reset. Integrated, against overloads and short-circuits, with manual and automatic reset. Signalling Output indicator lamp. Output and input indicator lamp. Other characteristics – Connection by lug- – Anti-harmonic clamps possible distortion filter Mounting Direct on 7 rail Direct, on 7 rail Direct on 7 rail and on panel Disturbance (conforming to EN55011/22) conducted and radiated cl.B cl.A (7/15 W) cl.B cl.B (30 W) Conforming to standards EN 50081-1, IEC 61000-6-2 EN 50081-2, EN 50081-1, EN 50081-1, (EN 50082-2), IEC 950, IEC 61000-6-2, IEC 61000-6-2, IEC 61000-6-2, EN61131-2/A11 EN 60950 (EN 50082-2), (EN 50082-2), IEC 950 IEC 950, 61000-3-2 Approvals UL, CSA, TÜV cULus, TÜV UL, CSA, TÜV, CTick Device type ABL 7RM ABL 7CEM ABL 7RE ABL 7RP Pages – 2/52 (1) Compatible input voltage, not indicated on the product. Schneider Electric 2/50 www.modiconplc.com 0 2-phase regulated switch mode power supplies 3-phase regulated switch mode power supplies Regulated switch mode power supplies for AS-i 2 Industrial applications. Industrial applications. Industrial applications. In-line continuous process equipment, machine Supply of d.c. voltage necessary for AS-i systems. tools, injection presses, etc. 2.3 120 and 240 W 240 and 480 W 120 W 240…960 W 72 W 145 W 2 x 72 W a 2 x 380…415 V 2-phase a 3 x a 3 x a 3 x a 100…240 V single-phase 380…415 V 400…520 V 400…520 V 3-phase 3-phase 3-phase c 24 V c 30 V c 24 V adjustable adjustable Primary switch mode electronic power supplies. Integrated, against overloads and short-circuits, with manual and automatic reset. Integrated, against overloads and short-circuits, overvoltage and undervoltage. Output indicator lamp. Output and input indicator lamps. – – Anti-harmonic – distortion filter Direct on 7 rail Direct on 7 rail Direct on 7 rail (except ABL-7UPS 24200 and ABL-7UPS24400) cl.B cl.B cl.B EN 50081-1, EN 50082-2, EN 60950 EN 50081-1, EN 50082-2, EN 50081-1, EN 50081-1, IEC 61000-6-2, EN 55022 class B EN 60950 EN 50082-2, EN 60950, IEC 61000-3-2 – – cULus, c us UL, CSA, TÜV ABL 7REQ ABL 7UEQ ABL 7UES ABL 7UPS ASI ABL 2/52 – Schneider Electric 2/51 www.modiconplc.com Presentation Modicon TSX Micro automation platform 0 Power supplies for d.c. control circuits ABL-7 power supplies The ABL-7 range of power supplies is designed to provide the d.c. voltage necessary for the control circuits of automation system equipment. Split into three families, this range meets all the needs encountered in industrial, commercial and residential applications. Single-phase or 3-phase, of the electronic switch mode type, they provide a quality of output which is suitable for the loads supplied and compatible with the mains supply available in the equipment. Clear guidelines are given for selecting protection devices which are often used with them and thus a comprehensive solution is provided, which can be used in total safety. 2 Phaseo switch mode power supplies These switch mode power supplies are totally electronic and regulated. The use of electronics makes it possible to significantly improve the performance of these power supplies, which offer: - very compact size, - integrated overload, short-circuit, overvoltage and undervoltage protection, - a very wide range of permissible input voltages, without any adjustment, - a high degree of output voltage stability, - good performance, - LED indicators on the front panel. 2.3 Phaseo power supplies are available in single-phase and 3-phase versions. They deliver a voltage which is precise to 3%, whatever the load and whatever the type of mains supply, within a range of 85 to 264 V for single-phase, or 360 to 550 V for 3-phase. Conforming to IEC standards and UL and CSA certified, they are suitable for universal use. The inclusion of overload and short-circuit protection makes downstream protection unnecessary if discrimination is not required. ABL-7 RE and ABL-7 RP supplies are also equipped with an output undervoltage control which causes the product to trip if the output voltage drops below 19 V, in order to ensure that the voltage delivered is always usable by the actuators being supplied. All the products are fitted with an output voltage adjustment potentiometer in order to be able to compensate for any line voltage drops in installations with long cable runs. Most of our power supplies are designed for direct mounting on 35 and 75 mm 7 rails. These power supplies are available in single-phase and 3-phase versions and are split into three families: Compact single-phase supply ABL-7CEM: b power less than or equal to 30 W (1.2 A), b compact size, b for all low power equipment, b suitable for use in automation system environments based on the Nano and Twido ABL 7CEM platforms, or in any automation system configuration requiring a c 24 V supply. Universal single-phase supplies ABL-7RE and ABL-7RP: b ABL-7RE v power between 48 W (2 A) and 240 W (10 A), v compact size, v for all machine equipment, v suitable for use in automation system environments based on the Micro and Premium platforms, or in any automation system configuration requiring a c 24 V supply. b ABL-7RP v power between 60 W (2.5 A) and 240 W (10 A), ABL-7RP v output voltage available: c 12, 24 and 48 V, v input filter (PFC) for commercial and residential environments (conforming to standard EN 61000-3-2), v two operating modes possible for handling of overload and short-circuit faults: - "AUTO" mode which provides automatic restarting of the power supply on elimination of the fault, - "MANU" mode which requires manual resetting of the power supply to restart. Resetting is achieved by switching off the mains power. Characteristics : References : Dimensions : Schemes : pages 2/56 to 2/59 page 2/61 page 2/62 page 2/63 2/52 www.modiconplc.com 43367-15-M 108700-13-M Presentation (continued) Modicon TSX Micro automation platform 0 Power supplies for d.c. control circuits Phaseo switch mode power supplies (continued) 3-phase and single-phase process supplies ABL-7U and ABL-7REQ: b ABL-7UE v power between 120 W (5 A) and 480 W (20 A), v compact size, v voltages between 3 x 380 V and 3 x 500 V, v for use in industrial applications, for all in-line or continuous process equipment, machine tools and injection presses, etc. v suitable for use in automation system environments based on the Premium and Quantum platforms, or in any automation system configuration requiring a c 24 V 2 supply. b ABL-7UPS v power between 120 W (10 A) and 960 W (40 A). Identical to the ABL-7UE range, this power supply differs in that it includes a filter ABL-7UPS ABL-7REQ (PFC) which means that it can be connected directly to the public mains supply, in compliance with standard EN 61000-3-2. This product, for world-wide use, is UL certified. b ABL-7 REQ v power between 120 W (5 A) and 240 W (10 A), v compact size, v can be connected to 2-phase input voltages between 380 V and 415 V, to replace older power supplies connected by only two wires. Economical, more competitive, yet with a smaller input voltage range it can, in certain cases, be used in place of the 2.3 3-phase versions. Using c 24 V b Using c 24 V enables so-called protection installations (PELV) to be built. Using PELV is a measure designed to protect people from direct and indirect contact. Measures relating to these installations are defined in publication NF C 12-201 and in standard IEC 364-4-41. b The application of these measures to the electrical equipment in machines is defined in standard NF EN 60204-1 and requires: v that the voltage used is below 60 V d.c. in dry environments and below 30 V in damp environments, v the connection of one side of the PELV circuit, or one point of the source, to the equipotential protection circuit associated with higher voltages, v the use of switchgear and control gear on which measures have been taken to ensure "safety separation" between power circuits and control circuits. b A safety separation is necessary between power circuits and control circuits in PELV circuits. Its aim is to prevent the appearance of dangerous voltages in c 24 V safety circuits. b The reference standards involved are: v IEC 61558-2-6 and EN 61558-2-6 (safety transformers), v IEC 664 (coordination of isolation). Telemecanique power supplies meet these requirements. b Moreover, to ensure that these products will operate correctly in relation to the demands of their reinforced isolation, it is recommended that they be mounted and wired as indicated below: v they should be placed on an earthed mounting plate or rail, v they should be connected using flexible cables, with a maximum of two wires per connection, and tightened to the nominal torque, v conductors of the correct insulation class must be used. b If the d.c. circuit is not connected to an equipotential protection conductor, an earth leakage detector will indicate any accidental earth faults (please consult your Regional Sales Office). Operating voltage b The permissible tolerances for the operating voltage are listed in publications IEC 1131-2 and DIN 19240. b For nominal voltage Un = c 24 V, the extreme operating values are from - 15 % to + 20 % of Un, whatever the supply fluctuations in the range -10 % to + 6 % (defined by standard IEC 38) and load variations in the range 0-100 % of In. All Telemecanique c 24 V power supplies are designed to provide a voltage within this range. b It may be necessary to use a voltage measurement relay to detect when the normal voltage limits are being surpassed and to deal with the consequences of this (please consult your Regional Sales Office). Characteristics : References : Dimensions : Schemes : pages 2/56 to 2/59 page 2/61 page 2/62 page 2/63 2/53 www.modiconplc.com 108387-25-M 530894 Selection Modicon TSX Micro automation platform 0 Power supplies for d.c. control circuits Selection of power supplies The characteristics to be taken into account when selecting a power supply are: - the required output voltage and current, - the mains voltage available in the installation. An initial selection can be made using the table opposite. This may however result in several products being selected as suitable. Other selection criteria must therefore be taken into account. b The quality of the mains power supply The Phaseo range is the solution because it guarantees precision to 3% of the output 2 voltage, whatever the load current and the input voltage. In addition, the wide input voltage range of Phaseo power supplies allows them to be connected to all mains supplies within the nominal range, without any adjustment. The Phaseo RP family can also be connected to c 110 and 220 V emergency supplies. b Harmonic pollution (power factor) The current drawn by a power supply is not sinusoidal. This leads to the existence of harmonic currents which pollute the mains supply. European standard EN 61000-3-2 limits the harmonic currents produced by power supplies. This standard covers all devices between 75 W and 1000 W, drawing up to 16 A per phase, and connected directly to the public mains power supply. Devices connected downstream of a 2.3 private, low voltage general transformer are therefore excluded. Regulated switch mode supplies always produce harmonic currents; a filter circuit (Power Factor Correction or PFC) must therefore be added to comply with standard EN 61000-3-2. Phaseo ABL-7RP and ABL-7UPS power supplies conform to standard EN 61000-3-2 and can therefore be connected directly to public mains power supplies. b Electromagnetic compatibility Levels of conducted and radiated emissions are defined in standards EN 55011 and EN 55022. The majority of products in the Phaseo range have class B certification and can be used without any restrictions due to their low emissions. ABL-7CEM24003 and ABL-7CEM24006 power supplies have class A certification. It is recommended that they should not be used in the following equipment: trains, aircraft, nuclear applications and in any environment where malfunctioning could cause serious injuries or lead to death. These products are designed for use in industrial equipment and are not suitable for use in residential environments. b Behaviour in the event of short-circuits Phaseo power supplies are equipped with an electronic protection device. This protection device resets itself automatically on elimination the fault (around 1 second for ABL-7 RE/RP, around 3 seconds for ABL-7 UE/UP/REQ) which avoids having to take any action or change a fuse. In addition, the Phaseo ABL-7RP/U/REQ ranges allow the user to select the reset mode in the event of a fault: - in the "AUTO" position, resetting is automatic, - in the "MANU" position, resetting occurs after elimination of the fault and after switching the mains power off and back on. This feature allows Phaseo ABL-7RP/U/REQ power supplies to be used in installations where the risks associated with untimely restarting are significant. b Behaviour in the event of phase failure In the event of failure of one phase, all Phaseo 3-phase power supplies switch to relaxation mode for as long as the input voltage is < 450 V. For operation on higher voltages (e.g. 480 V), use of an upstream GV2 type residual current protection device is recommended. b Selection of reset mode v on the ABL-7RP family of products: By microswitch on the front panel of the product. v on the ABL-7U/REQ family of products: By jumper on the front panel. Warning: selection of the function is only possible after the mains power supply has been switched off for at least 5 minutes. The jumper is moved using a pair of insulated, flat-nose pliers. Presentation : Characteristics References : Dimensions : Schemes : pages 2/52 and 2/53 pages 2/56 to 2/59 page 2/61 page 2/62 page 2/63 2/54 www.modiconplc.com Selection (continued) Modicon TSX Micro automation platform 0 Power supplies for d.c. control circuits Selection according to application characteristics Type of mains supply Single-phase 2-phase 3-phase Rated mains supply voltage a 100…240 V 50/60 Hz 100…240 V 2 x 380…415 V 3 x 3 x 400…520 V 3 x 380…520 V c 110… 220 V (1) 50/60 Hz 50/60 Hz 380…415 V 50/60 Hz 50/60 Hz Wide range Wide range 50/60 Hz Wide range Wide range Permissible variation 85…264 V, 47…63 Hz 85…264 V 340…460 V 340…460 V 360…550 V 340…550 V c 100...250 V (1), c 105...370 V (2) 47…63 Hz 47…63 Hz 47…63 Hz 47…63 Hz 47…63 Hz Output voltage 12 V 48 V 24 V 24 V 24 V 24 V 24 V 24 V 2 Output current 0.3 A ABL- 7CEM24003 0.6 A ABL- 7CEM24006 1.2 A ABL- 7CEM24012 2 A ABL- 7RE2402 2.5 A ABL- 7RP4803 3 A ABL- ABL- 2.3 7RP2403 7RE2403 5 A ABL- ABL- ABL- ABL- ABL- 7RP1205 7RP2405 7RE2405 7REQ24050 7UES24050 10 A ABL- ABL- ABL- ABL- ABL- 7RP2410 7RE2410 7REQ24100 7UEQ24100 7UPS24100 20 A ABL- ABL- 7UEQ24200 7UPS24200 40 A ABL- 7UPS24400 Conforming to EN 61000-3-2 Yes (not applicable for ABL-7CEM) NoNoNoNo Yes Integrated automatic Yes Yes Yes protection Automatic or manual restart on ABL-7RP Automatic Automatic or manual restart Automatic restart only on ABL-7CEM restart (1) Values for ABL-7RP power supplies, not indicated on the product. (2) Values for ABL-7CEM power supplies, not indicated on the product. Presentation : Characteristics : References : Dimensions : Schemes : pages 2/52 and 2/53 pages 2/56 to 2/59 page 2/61 page 2/62 and 2/63 page 2/63 2/55 www.modiconplc.com Characteristics Modicon TSX Micro automation platform 0 Power supplies for d.c. control circuits Phaseo regulated switch mode power supplies Technical characteristics Type of power supply ABL-7CEM ABL-7RE ABL-7RP Product certifications cULus, TÜV UL, CSA, TÜV, CTick Conforming to standards UL 508 UL 508, CSA 22.2 n° 950 Safety IEC/EN 60950 IEC/EN 61496-1-2 EMC EN 50081-2, EN 50082-2 EN 50081-1, IEC 61000-6-2 (EN 50082-2) Low frequency harmonic currents – – EN 61000-3-2 Input circuit LED indication – Orange LED Orange LED 2 Input voltages Rated values V a 100…240, a 100…240 a 100…240, c 110…220 compatible (1) c 110…220 compatible (1) Permissible values V a 85…264, a 85…264 single-phase a 85…264, c 105…370 compatible (1) c 100…250 compatible (1) Permissible frequencies Hz 47…63 Efficiency at nominal load > 70 % > 85 % Current Ue = 240 V A 0.1 (7 W)/0.2 (15 W)/0.45 0.6 (48 W)/0.83 (72 W) 0.4 (72 W)/0.6 (120 W) consumption (30 W) 1.2 (120 W)/2.5 (240 W) 1.3 (240W) Ue = 100 V A 0.17 (7 W)/0.3 (15 W)/0.68 1.2 (48 W)/1.46 (72 W) 0.8 (72 W)/1 (120 W)/2.8 (30 W) 1.9 (120 W)/3.6 (240 W) (240 W) Current at switch-on A < 50 < 30 Power factor 0.45 approx. 0.65 approx. 0.98 approx. Output circuit 2.3 LED indication Green LED Green LED Green LED Nominal output voltage (U out) V c 24 12, 24 and 48 Nominal output current A 0.3/0.6/1.2 2/3/5/10 2.5/5/10 Precision Output voltage Adjustable from 90 to 110 % Adjustable from 100 to 120 % Line and load regulation 2 % max ± 3 % Residual ripple - interference mV < 200 (peak-peak) Micro-breaks Holding time at I max and Ve min ms > 20 > 10 > 20 Temporary overloads Permissible inrush current (U out >19V) See curves page 2/59 Protection Short-circuit Permanent/automatic Permanent/automatic Permanent/automatic restart restart restart or restart after switching off mains power Overload 1.05 In 1.1 In Overvoltage U > 1.2 Tripping if U > 1.5 Un Undervoltage – Tripping if U < 0.8 Un Operating and environmental characteristics 2 Connections Input mm 2 x 2.5 + earth 2 Output mm 2 x 2.5 2 x 2.5 + earth, multiple output, depending on model Ambient conditions Storage temperature °C - 25… + 70 Operating temperature °C - 10… + 60 (derating as 0… + 60 (derating as from 50° C, mounted vertically) from 50° C, mounted vertically) Max. relative humidity 20…90 % 95 % without condensation or dripping water Degree of protection IP 20 conforming to IEC 529 Vibrations Conforming to IEC 61131-2 Operating position Vertical and horizontal Vertical (see derating curve, page 2/58) MTBF at 40° > 100 000 h Connections Series Possible (see page 2/59) Parallel No Possible (max. temperature 50° C) Dielectric strength Input/output 3000 V/50 and 60 Hz 1 min 3000 V/50 and 60 Hz 1 min Input/earth 2000 V/50 and 60 Hz 1 min 3000 V/50 and 60 Hz 1 min Output/earth (and output/output) 500 V/50 and 60 Hz 1 min 500 V/50 and 60 Hz 1 min Input fuse incorporated Yes (not interchangeable) Disturbance EN 50081-2 (generic) EN 50081-1 Conducted EN 55011/EN 55022 class A EN 55011/EN 55022 class B (7 and 15 W) EN 55011/EN 55022 class B (30W) Radiated EN 55011/EN 55022 class B Immunity IEC 61000-6-2 (generic) Electrostatic discharge EN 61000-4-2 (4 kV contact/8 kV air) Electromagnetic EN 61000-4-3 level 3 (10 V/m) Conducted interference EN 61000-4-4 level 3 (2 kV) , EN 61000-4-5, EN 61000-4-6 level 3, EN 61000-4-8 level 4 Mains interference EN 1000-4-11 (voltage drops and cuts) (1) Compatible input voltage, not indicated on the product. Presentation : References : Dimensions : Schemes : pages 2/52 and 2/53 page 2/61 page 2/62 page 2/63 2/56 www.modiconplc.com Characteristics (continued) Modicon TSX Micro automation platform 0 Power supplies for d.c. control circuits Phaseo regulated switch mode power supplies Technical characteristics Type of power supply ABL-7REQ24p ABL-7UEQ24p ABL-7UES24p ABL-7UPS24p Product certifications – cULus, c us Conforming to standards Safety EN 60950 EMC EN 50081-1, EN 50082-2 Low frequency harmonic currents – EN 61000-3-2 Input circuit LED indication – 2 Input voltages Rated values V a 2 x 380…415 a 3 x 380…415 a 3 x 400…520 a 3 x 400…520 Permissible values V a 2 x 340…460 a 3 x 340…460 a 3 x 360…550 a 3 x 360…550 Permissible frequencies Hz 50…60 Efficiency at nominal load > 85 % > 90 % Current consumption Ue = 400 V A 0.65 (120 W)/1.2 0.75 (240 W)/1.5 0.7 (240 W)/1.2 (480 W)/1.7 (960 W) (240 W) (480 W) Current at switch-on A <35 Power factor 0.6 0.55 0.7 0.7/0.9 (960 W) 2-phase operating mode V – Relaxation if input voltage < a 450 Output circuit 2.3 LED indication Green LED Nominal output voltage (U out) V c 24 Nominal output current A 5/10 10/20 5 10/20/40 Precision Output voltage Adjustable from 100 to 116% Line and load regulation 1 % max Residual ripple - interference mV < 200 (peak-peak) Micro-breaks Holding time for I max and Ve min ms 15 10 Between 8 and 13 Temporary overloads Permissible inrush current (U out >19V) See curves, page 2/59 Protection Short-circuit Permanent/automatic or normal restart Overload 1.20 In < 50 ms Overvoltage V 28.5 typical Undervoltage V 19 typical Operating and environmental characteristics 2 2 Connections Input mm 2 x 1.5…2.5 mm + earth 2 2 2 2 2 Output mm 4 x 1.5…2.5 mm 4 x 4…6 mm 4 x 1.5…2.5 mm 4 x 1.5…2.5 mm + earth (240 W) 2 4 x 4…6 mm + earth (480 W) 2 4 x 4…10 mm + earth (960 W) Ambient Storage temperature °C - 25…+ 70 conditions Operating temperature °C 0° C…+ 60° C Maximum relative humidity 30…90 % Degree of protection IP 20 or IP XXB Vibrations Conforming to IEC 61131-2 Operating position Vertical MTBF > 100 000 h Connections Series Possible Parallel See page 2/58 Dielectric Input/output 3750 V/50 and 60 Hz 1 min strength Input/earth 3500 V/50 and 60 Hz 1 min Output/earth (and output/output) 500 V/50 and 60 Hz 1 min Input fuse incorporated No Disturbance Conducted/radiated EN 55011/EN 5022 - class B Immunity Electrostatic discharge EN 61000-4-2 (4 kV contact/8 kV air) Electromagnetic EN 61000-4-3 level 3 (10 V/m) Conducted interference EN 61000-4-4 level 3 (2 kV) , EN 61000-4-5, EN 61000-4-6 level3, EN 61000-4-8 level 4 (for ABL-7RE/RP) Mains interference EN 61000-4-11 (voltage drops and cuts) Presentation : References : Dimensions : Schemes : pages 2/52 and 2/53 page 2/61 page 2/62 page 2/63 2/57 www.modiconplc.com Output characteristics Modicon TSX Micro automation platform 0 Power supplies for d.c. control circuits Phaseo regulated switch mode power supplies Derating The ambient temperature is a determining factor which limits the power that an electronic power supply can deliver continuously. If the temperature around the electronic components is too high, their life will be significantly reduced. Conversely, a power supply can deliver more than its nominal power if the ambient temperature remains largely below the rated operating temperature. The rated ambient temperature for Phaseo power supplies is 50 °C. Above this, derating is necessary up to a maximum temperature of 60 °C. 2 The graph below shows the power (in relation to the nominal power) which the power supply can deliver continuously, according to the ambient temperature. 140 P/Pn (%) 120 100 80 2.3 3 2 1 60 50 40 20 0 0 70 10 20 30 40 50 60 Maximum operating temperature (°C) 1 ABL-7RE, ABL-7RP, ABL-7U mounted vertically 2 ABL-7CEM mounted vertically 3 ABL-7CEM mounted horizontally Derating should be considered in extreme operating conditions: - intensive operation (output current permanently close to the nominal current, combined with a high ambient temperature), - output voltage set above 24 V (to compensate for line voltage drops, for example), - parallel connection to increase the total power. General rules to be complied with Intensive operation See derating on above graph. Example for ABL-7RE: - without derating, from 0 °C to 50 °C, - derating of nominal current by 2%, per additional °C, up to 60 °C. Rise in output The nominal power is fixed. voltage Increasing the output voltage means that the current delivered must be reduced Parallel connection The total power is equal to the sum of the power supplies used, but the to increase the maximum ambient temperature for operation is 50 °C. power (except To improve heat dissipation, the power supplies must not be in contact ABL-7CEM) with each other In all cases, there must be adequate convection round the products to ensure easier cooling. There must be a clear space of 50 mm above and below Phaseo power supplies and of 15 mm at the sides. Presentation : References : Dimensions : Schemes : pages 2/52 and 2/53 page 2/61 page 2/62 page 2/63 2/58 www.modiconplc.com Output characteristics Modicon TSX Micro (continued) automation platform 0 Power supplies for d.c. control circuits Phaseo regulated switch mode power supplies Load limit ABL-7CEM24ppp ABL-7RE24pp/ABL-7RPpppp ABL-7Upp24pp/ABL-7REQpppp U out (%) U out 100 % 19 V 50 % 2 12 I out I out 1,1 x In 1,2 x In In 1,2 x In 1 ABL-7RE24pp/ABL-7RPpppp 2 ABL-7Upp24pp/ABL-7REQpppp Temporary overloads ABL-7CEM ABL-7RE/ABL-7RP T (ms) I out T (ms) I out 100 20 I out:(0...100%) I out:(0...100%) 90 2.3 18 80 70 16 60 14 50 40 12 30 20 10 10 0 0 1,8 2 2,2 2,4 2,6 1,2 1,3 1,4 1,5 1,6 1,7 1,8 x In x In ABL-7U T (ms) 800 700 600 I out=0% I out=50% 500 Example: For an ABL-7UPS24ppp power supply with 50 % loading. 400 (I out = 50 %), this power supply can absorb a current peak of 1.6 x In for 250 ms with an output voltage u 19 V. 300 I out=80% 250 200 I out=100% 100 0 1,2 1,3 1,4 1,5 1,6 1,7 1,8 x In Series or parallel connection Series connection Parallel connection ABL 7 ABL 7 ABL 7 ABL 7 (1) (1) 2 x c 24 V / I out c 24 V / 2 x I out Family Series Parallel ABL-7CEM 2 products max (1) No ABL-7RE/RP 2 products max 2 products max ABL-7U/REQ 2 products max 2 products max (1) 2 Shottky diodes 2 A/100 V on ABL-7CEM only. Presentation : References : Dimensions : Schemes : pages 2/52 and 2/53 page 2/61 page 2/62 page 2/63 2/59 www.modiconplc.com + + + + Selection Modicon TSX Micro automation platform 0 Phaseo regulated switch mode power supplies Upstream protection ABL-7CEM, ABL-7RE and ABL-7RP power supplies: protection of the power supply line Type of mains supply a 115 V single-phase a 230 V single-phase Type of protection Thermal-magnetic circuit-breaker gG fuse Thermal-magnetic circuit-breaker gG fuse GB2 C60N GB2 C60N ABL-7CEM24003 GB2-CD06 24183 2A GB2-CD07 24184 2 A MG24516 (1) MG24517 (1) ABL-7CEM24006 GB2-CD07 24184 2A GB2-CD08 24185 2 A MG24517 (1) MG24518 (1) 2 ABL-7CEM24012 GB2-CD07 24184 2A GB2-CD08 24185 2 A MG24517 (1) MG24518 (1) ABL-7RE2402 GB2-pB07 MG24517 (1) 2A GB2-DB06 MG24516 (1) 2 A ABL-7RE2403 GB2-pB07 MG24517 (1) 2 A GB2-DB06 MG24516 (1) 2 A ABL-7RE2405 GB2-pB08 MG24518 (1) 4 A GB2-DB07 MG17453 (1) 2 A ABL-7RE2410 GB2-pB12 MG17454 (1) 6 A GB2-DB08 MG24518 (1) 4 A ABL-7RP2403 GB2-pB07 MG24517 (1) 2 A GB2-DB07 MG24516 (1) 2 A ABL-7RP2405 GB2-pB07 MG24517 (1) 2 A GB2-DB07 MG24516 (1) 2 A 2.3 ABL-7RP2410 GB2-pB09 MG24519 (1) 4 A GB2-DB07 MG24516 (1) 2 A ABL-7RP4803 GB2-pB07 MG24517 (1) 2 A GB2-DB07 MG24516 (1) 2 A ABL-7REQ power supplies: protection of the power supply line Type of mains supply a 400 V 2-phase Type of protection Thermal-magnetic circuit-breaker gG fuse 2-pole GB2-DBpp C60N ABL-7REQ24050 DB07 24100 10 A ABL-7REQ24100 DB08 24100 10 A ABL-7UEQ, ABL-7UES and ABL-7UPS power supplies: protection of the power supply line Type of mains supply a 400…480 V 3-phase Type of protection Thermal-magnetic circuit-breaker gG fuse 2-pole GV2-MEpp C60N ABL-7UEQ24100 GV2-ME08 (1) 24212 4 A ABL-7UEQ24200 GV2-ME08 (1) 24213 6 A ABL-7UES24050 GV2-ME08 (1) 24210 2 A ABL-7UPS24100 GV2-ME08 (1) 24210 2 A ABL-7UPS24200 GV2-ME08 (1) 24211 3 A ABL-7UPS24400 GV2-ME08 (1) 24212 4 A (1) UL certified circuit-breaker. Presentation : References : Dimensions : Schemes : pages 2/52 and 2/53 page 2/61 page 2/62 page 2/63 2/60 www.modiconplc.com References Modicon TSX Micro automation platform 0 Power supplies for d.c. control circuits Phaseo regulated switch mode power supplies ABL 7CEM single-phase regulated switch mode power supplies Mains Output Nominal Nominal Auto- Conforming Reference Weight input voltage voltage power current protect to standard 47...63 Hz reset EN 61000-3-2 V c V W A kg a 100…240 24 7 0.3 auto no ABL-7CEM24003 0.150 single-phase wide range 15 0.6 auto no ABL-7CEM24006 0.180 c 110…220 (1) 2 ABL-7CEM 30 1.2 auto no ABL-7CEM24012 0.220 ABL-7RE single-phase regulated switch mode power supplies Mains Output Nominal Nominal Auto- Conforming Reference Weight input voltage voltage power current protect to standard 47...63 Hz reset EN 61000-3-2 V c V W A kg a 100…240 24 48 2 auto no ABL-7RE2402 0.520 single-phase wide range 72 3 auto no ABL-7RE2403 0.520 120 5 auto no ABL-7RE2405 1.000 2.3 240 10 auto no ABL-7RE2410 2.200 ABL-7RP single-phase regulated switch mode power supplies Mains Output Nominal Nominal Auto- Conforming Reference Weight input voltage voltage power current protect to standard 47...63 Hz reset EN 61000-3-2 ABL-7RE2405 V c V W A kg ABL-7RP2405 ABL-7RP4803 a 100...240 12 60 5 auto/man yes ABL-7RP1205 1.000 single-phase wide range 24 72 3 auto/man yes ABL-7RP2403 0.520 c 110...220 (1) 120 5 auto/man yes ABL-7RP2405 1.000 240 10 auto/man yes ABL-7RP2410 2.200 48 144 2.5 auto/man yes ABL-7RP4803 1.000 ABL-7REQ 2-phase regulated switch mode power supplies Mains Output Nominal Nominal Auto- Conforming Reference Weight input voltage voltage power current protect to standard 47...63 Hz reset EN 61000-3-2 V c V W A kg a 380…415 24 120 5 auto/man no ABL-7REQ24050 0.850 ABL-7REQ 240 10 auto/man no ABL-7REQ24100 1.200 ABL-7U 3-phase regulated switch mode power supplies Mains Output Nominal Nominal Auto- Conforming Reference Weight input voltage voltage power current protect to standard 47...63 Hz reset EN 61000-3-2 V c V W A kg a 3x380…415 24 240 10 auto/man no ABL-7UEQ24100 1.200 480 20 auto/man no ABL-7UEQ24200 2.100 a 3x400…520 24 120 5 auto/man no ABL-7UES24050 1.300 240 10 auto/man yes ABL-7UPS24100 1.300 ABL-7UPS 480 20 auto/man yes ABL-7UPS24200 2.300 960 40 auto/man yes ABL-7UPS24400 4.500 (1) Compatible input voltage, not indicated on the product. Presentation : Characteristics : Dimensions : Schemes : pages 2/52 and 2/53 pages 2/56 to 2/59 page 2/62 page 2/63 2/61 www.modiconplc.com 108387-25-M 108700-13-M 530894 43367-15-M Dimensions Modicon TSX Micro automation platform 0 Power supplies for d.c. control circuits ABL-7RE24pp/ABL-7RPpppp ABL-7RE2402/2403 ABL-7RE2405 ABL-7RE2410 Common side view ABL-7RP2403 ABL-7RP1205/2405/4803 ABL-7RP2410 Mounting on 35 and 75 mm rails 2 120 27 54 135 ABL-7CEM24ppp ABL-7CEM24006/ ABL-7REQ24ppp/ABL-7UEQ24100/ABL-7UES24050/ ABL-7CEM24003 ABL-7CEM24012 ABL-7UPS24100 Common front view 70 95 45 2.3 a P6 68 Panel mounting (1) ABL- P a mm mm 7REQ24050 130 – 7REQ24100 154 – 7UEQ24100 154 – 7UES24050 171 15 35 (38,5) 7UPS24100 171 15 (1) 2 x M4 or 2 x Ø4.5 ABL-7UEQ24200 ABL-7UPS24200 60 201 6 84 240 84 ABL-7UPS24400 81 275 106 Presentation: Characteristics: References: Schemes: pages 2/52 and 2/53 pages 2/56 to 2/59 page 2/61 page 2/63 2/62 www.modiconplc.com 120 60 (62,5) 120 75 170 230 242 120 120 127 197 209 Schemes Modicon TSX Micro automation platform 0 Power supplies for d.c. control circuits ABL-7RE2402/2403 ABL-7RE2405 ABL-7RE2410 2 ABL-7RP2403 ABL-7RP1205/2405/4803 ABL-7RP2410 Filter Filter Filter 2.3 ABL-7CEM24ppp ABL-7REQ24ppp ABL-7UEppppp ABL-7UPppppp + + + + + + L1 L1 L L2 L2 N L3 L3 Presentation: Characteristics: References: Dimensions: pages 2/52 and 2/53 pages 2/56 to 2/59 page 2/61 page 2/62 2/63 www.modiconplc.com + N/ N N NC + + L L/+ L + + N/ N – L L/+ + + – + + N/ N – L L/+ + + – + + –