TEKNOR APEX T830E/433

Description
Teknor T830 Half-size CPU Board - PC/104 Expansion, Video, LAN
Part Number
T830E/433
Price
Request Quote
Manufacturer
TEKNOR APEX
Lead Time
Request Quote
Category
Single Board Computers
Specifications
Altitude
4,572 m / 15,000 ft 15,240 m / 50,000 ft
BIOS
Award Elite BIOS in Boot Block Flash with recovery code; save CMOS in Flash option, and boot from LAN capability; Auto configuration, extended setup; CC00-E000 address blocking; PnP tables; Setup console redirection to serial port (VT100 mode) with CMOS setup access; Software enable/disable of onboard Ethernet; Diskless, keyboardless, and videoless operation extensions; System, video and LAN BIOS shadowing; Programmable bus and I/O speeds, and memory wait states; Advanced security feature for floppy and HDD; DMI and HDD S.M.A.R.T support; Advanced Configuration and Power Interface (ACPI 1.0), Advanced Power Management (APM 1.2), advanced thermal management (resume, overheat alarm and auto slow down), and Green support
Bus Interface
Front Side Bus(66/100 MHz); AGP bus; PCI Bus(33 MHz); ISA Bus(8.33 MHz); PC/AT ISA bus or stand-alone operation; PC/104-Plus VIPci compatible
Cache
16/16KB Instruction / Data Level 1; 128/256KB Advanced Transfer Cache (on-die, full speed L2 cache with ECC)
Clock/Calendar
Real-time clock with 256 byte battery backup CMOS RAM
CompactFlash™ Module
Optional bootable CompactFlash™ module interfaces to secondary IDE channel, user upgradeable, master/slave
CPU
Intel® Pentium III 600 MHz; Intel® Pentium III - Low Power 500 MHz; Celeron™processor 300, 566 MHz in PPGA370 Package; Celeron™ - Low Power 400 MHz
Data Path
64-bit CPU bus; 32-bit AGP bus; 32-bit on PCI bus (PC/104-Plus); 16-bit on ISA bus
Ethernet
One PCI 10Base-T/100Base-TX (Intel 82559)
Faceplate Connector
CRT (female DB-15 slim); Ethernet (RJ-45 with link/activity indicators);
FLAT PANEL SUPPORT
Supports monochrome & color Plasma, EL, DSTN, SSTN, TFT/CRT panels with resolution up to 800 x 600, 16.8M colors; 1024 x 768, 64K colors; or 1280 x 1024, 256 colors, non-interlaced; Compatible with CGA, EGA, Hercules, MDA, VGA, SVGA, XGA and SXGA
Floppy Disk
Support for two drives (360KB to 1.44MB)
Headers
USB (10-pin shrouded); serial ports (two 10-pin shrouded); parallel port (26-pin shrouded); floppy (34-pin shrouded); EIDE (one 40-pin shrouded); PS/2 mouse (4-pin locking); flat panel display (50-pin and 20-pin high density
I/O
SMC FDC37C672 Super I/O
Interrupts
11 edge sensitive and configurable; 4 PCI level sensitive, configurable to any interrupt vector for PnP compatibility; All ISA onboard interrupts are PnP compliant DMA Channels (ISA); Four 8-bit, three 16-bit; Supports scatter / gather, Fast Type-F DMA Flash Memory; 2Mb (256KB) Boot Block for BIOS field upgrade; 4KB Serial EEPROM for user configuration
Mechanical
181 x 122 x 36mm at CPU / fan (7.125 x 4.80 x 1.40 in. at CPU / fan); Conforms to IEEE P996 PC/AT bus, PCI Rev. 2.1, & PC/104-Plus Rev. 1.0 specifications
Operating & Storage and Transit Temperature-Celeron / PIII
0° to 50°C/32° to 122°F -40° to +85°C/-40° to 185°F (w/airflow)
Operating & Storage and Transit Temperature-Celeron LP
0° to 60°C/32° to 140°F -40° to +85°C/-40° to 185°F (w/airflow)
Operating & Storage and Transit Temperature-PIII LP
0° to 60°C/32° to 140°F -40° to +85°C/-40° to 185°F (w/airflow)
Operating Humidity (RNC)
5% to 95% @ 40°C/104°F, non-condensing
OS Compatibility
PC and MS-DOS™; Windows® 3.X; Windows® 95; Windows® 98;Windows® CE; Windows® NT 4.0, Windows® 2000; QNX™; LINUX
Parallel Port
One bi-directional with all IEEE 1284 protocols supported and BIOS selectable IRQs and addressing
PCI EIDE
Two EIDE drives; PIO Mode 4, Bus Master IDE or Ultra DMA/33
Power Requirements
Supply Voltage Vcc - +5V -5%; CPU - 300 566 500 (PIII LP); ICC typ.* +5V 3.69A 3.10A 2.76A; ICC Susp.* +5V 1.64A 1.63A 1.44A
Resolution
Supports CRT with resolution up to 800 x 600, 16.8 M colors; 1024 x 768, 64K colors; or 1280 x 1024, 256 colors, non-interlaced
Serial Ports
Two RS-232 (16C550) with 16 byte FIFO as COM1-4 with BIOS selectable IRQs and addressing, serial port 2 BIOS configurable RS-422/485
Shock
5 G, each axis
Storage and Transit Humidity
5% to 95% @ 40°/104°F, non-condensing
Supervisory
Two-stage software programmable watchdog timer drives NMI on 1ststage, system reset on 2nd stage; Time out from 16 msec to 4.25 min; CPU temperature monitor/alarm; power failure/low battery detector
System Chipset
Intel 440BX AGP set 66/100MHz system/memory bus
System Memory
One 168-pin latching DIMM socket, 64/72-bit; Up to 256 MB with 1, 2, 4, 8, 16 or 32M x 64/72, 66/100 MHz Synchronous; DRAM / Registered SDRAM non ECC / ECC mode (single bit error correction, double bit detection via Intel 440BX chip set); all 256 MB cacheable
USB Ports
Two
Vibration
1.5 G, each axis
Video
Integrated Frame Accelerated Graphics Port (AGP) 64-bit CRT/Flat Panel controller with 2 MB 83 MHz SDRAM memory (C&T 69000)
Features
- 10/100Base-TX Ethernet support
- 64-bit AGP CRT and Flat Panel Video with 2 MB SDRAM
- Celeron™ processor 300, 566 MHz in PPGA370 Package with 128 KB L2 Cache
- Intel 440BX AGPset with 66/100MHz FSB
- PC/104-Plus, ISA Passive Backplane or Stand-Alone Operation
- Pentium III 600 MHz
- Pentium III Low Power - 500 MHz
- Ultra DMA/33 IDE (Dual) & CompactFlash™ Disk Support
- Up to 256 MB SDRAM/RSDRAM
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the T830E/433?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
Related Products

Tenkor P3S440S/700 TEKNOR P3S440S/700 CPU Boards-Full-size Single Board Computer with VGA, LAN and S...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods