Manufacturers
TB WOOD'S XFC2001-0C
Description
TB Woods XFC2001-0C E-TRAC Micro-Inverter | 230 VAC Input Voltage, 1 HP with NEMA 4 Enclosure, Chassis with Keypad
Part Number
XFC2001-0C
Price
Request Quote
Manufacturer
TB WOOD'S
Lead Time
Request Quote
Category
Micro Inverter
Specifications
Acceleration and Deceleration Range
Programmable 0.1 to 600 seconds to maximum frequency (2 Each
Agency Listings
UL & CUL Listed
Auxiliary Relay
Programmed as Fault. Programmable to signal one of ten conditions
Control System
Voltage Vector PWM
Dynamic Braking
Up to 60% for 6 sec. with standard DB resistor
Elevation
1000 Meters (3,300 Feet) w/o derating
Frequency Command Selections
0-5 VDC, 0-10 VDC, 0-20 mA, 4-20 mA, direct or inverted; Digital Keypad; Program Memory Unit; Remote Keypad Unit
Frequency Range
0.1-400 Hz programmable in 0.05 Hz increments. (0.1 Hz above 99.95 Hz)
Frequency resolution
0.05 Hz or 0.1% of maximum frequency
Humidity
90% RH or less, non-condensing
Input Control Terminals
15; multi-functional; pull-up or pull-down logic
Input Frequency (± 10%)
50/60 Hz
Keypad Display
6 digit, backlit LCD with special annunciators and unit symbols
LED Indicators
Red & Green for operation and fault annunciation (See Section 3.6)
Maximum / Minimum Frequency
Separately programmable to 400 Hz
Operating Controls
Keypad, Remote Keypad Unit, Terminal Strip, Program Memory Unit
Operating Temperature
0°C to +40°C (NEMA 1/NEMA 4 models). 0°C to +50°C (Chassis model)
Overload Capacity
150% for 60 Seconds
Phase Imbalance (3ø only)
±2%
Preset Speeds
Up to 8 available; programmable to maximum frequency
Programming Levels
Level 1 - Operator, Level 2 - Engineer
PWM Frequency
7.8/9.2kHz (model dependent)
Starting Torque
Greater than 100%
V/Hz Ratio
0.24 - 8.85 (230 VAC models). 0.48 - 17.69 (460 VAC models)
Vibration
0.6 G Maximum
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the XFC2001-0C?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
TB Woods XFC1000-5A E-TRAC Micro-Inverter, 115 VAC Input Voltage, 1/2 HP with Enclosure, Chassis wit...
TB Woods XFC1000-5B E-TRAC Micro-Inverter, 115 VAC Input Voltage, 1/2 HP with NEMA 1 Enclosure, Chas...
TB Woods XFC1001-0B E-TRAC Micro-Inverter, 115 VAC Input Voltage, 1 HP with NEMA 1 Enclosure, Chassi...
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods