Rated 55W ITE & Medical Applications Peak 65W (Universal) SNP-Z05 Series Features: Only 1.1 inch height 5.7 Watt per cubic inch With ITE & Medical safety Efficiency between 78% to 87% o o Operating from 0 C to 70 C by convection General Specifications: Input voltage ...........................................90VAC to 264VAC Short circuit protection ..................................... auto recovery Input frequency.................................................47Hz to 63Hz Over voltage protection ........................................... latch off o Inrush current ................................ less than 30A at 115VAC Operating temperature .......................... 0 to 70 C convection o o less than 60A at 230VAC derating: 2.5% / C > 50 C o cold start, 25 C Cooling ..................................................... free air convection o o Efficiency .............................. 78%~87% depends on models Storage temperature .......................................-40 C to +85 C at rated load and 115VAC EMI .......................................................................... FCC "B" Hold up time .................................................... 14mS typical EN55022"B", EN55011"B" at rated load and 115VAC EMS ...................................... EN61000-4-2,-3,-4,-5,-6,-8,-11 Over load protection ........................................ auto recovery Safety ..............................................UL 60950-1, UL 60601-1 CSA C22.2 No. 60950-1, No. 601.1 EN 60950-1, EN 60601-1 Mechanical Specifications: Notes: 1. Dimensions shown in mm as left. Tolerance: + -1mm (Excluding cables). 2. Size: 101.6 X 50.8 X 28 (mm) 4" X 2" X 1.102" 3. Packing: Net weight: 140 g approx. / unit Gross weight: 13.5 kg approx. / carton, 80 units / carton Carton size (mm): 382 (L) x 374 (W) x 277 (H) 4. Connectors: AC input : JST B2P3-VH or equivalent DC output : JST B4P-VH or equivalent for single output JST B7P-VH or equivalent for multiple outputs 5. Output Pin assignment: PIN NO. 1 2 3 4 SNP-Z056 +5V +5V GND GND SNP-Z057 +12V +12V GND GND SNP-Z058 +15V +15V GND GND SNP-Z059 +24V +24V GND GND SNP-Z05T +48V +48V GND GND SNP-Z05B +3.3V +3.3V GND GND -Claus- JUN. 2006 ** This data sheet is only for model selection. For business, engineering specification by model must be used. 2-1 Rated 55W ITE & Medical Applications Peak 65W (Universal) SNP-Z05 Series Output Specifications: MODEL OUTPUT LOAD VOLTAGE RIPPLE LINE LOAD NO. RAIL MIN. RATED PEAK ACCURACY NOISE REG. REG. SNP-Z056 +5V 0A 7A 9A +4.95V~+5.05V 50mVpp ±0.5% ±1% SNP-Z057 +12V 0A 4.6A 5.4A +11.9V~+12.1V ±0.5% ±0.5% ±0.5% SNP-Z058 +15V 0A 3.7A 4.3A +14.9V~+15.1V ±0.5% ±0.5% ±0.5% SNP-Z059 +24V 0A 2.3A 2.7A +23.8V~+24.2V ±0.5% ±0.5% ±0.5% SNP-Z05T +48V 0A 1.2A 1.4A +47.6V~+48.4V ±0.5% ±0.5% ±0.5% SNP-Z05B +3.3V 0A 8A 10A +3.25V~+3.35V 50mVpp ±0.5% ±1.5% Note: o 1. The max. load can be continuously provided at 40 C and convection cooling conditions. The peak load can be temporarily provided up to 8 sec- onds. 2. At factory, all outputs in 60% rated load condition, each output is checked to be within the accuracy range while the main output is setting to within the specified accuracy range at rated load. 3. Line regulation is defined by changing ±10% of input voltage from nominal line at rated load. 4. Load regulation is defined by changing ±40% of measured output load from 60% rated load at another output set to 60% rated load. 5. Ripple & noise is measured by using 15MHz bandwidth limited oscilloscope and terminated each output with a 0.47uF capacitor at rated load and nominal line. For SNP-Z056 and SNP-Z05B, one extra 47uF electrolytic capacitor should be added. 6. Hold up time is measured from the end of the last charging pulse to the time which the main output drop down to regulation limit at rated load and nominal line. -Claus- ** This data sheet is only for model selection. For business, engineering specification by model must be used. 2-2 JUN. 2006