Product data sheet ZB2BE101 Characteristics contact block ZB2 - spring return - 1 NO - slow- break - front mounting Main Range of product Harmony XAC Product or component Contact block type Component name ZB2 Electrical circuit type Control circuit Contact block type Single Type of operator Spring return Contacts type and com- 1 NO position Mounting of block Front mounting Complementary Contact block application Single speed Product compatibility XACA XAPS2 Connections - terminals Screw clamps terminals (1 x 2.5 mm²) with or without cable end Screw clamps terminals (2 x 1.5 mm²) with or without cable end Mechanical durability 1000000 cycles Contact code designation A600 AC-15 , Ue = 240 V , Ie = 3 A conforming to IEC 947-5-1 appendix A A600 AC-15 , Ue = 600 V , Ie = 1.2 A conforming to IEC 947-5-1 appendix A Q600 DC-13 , Ue = 600 V , Ie = 0.1 A conforming to IEC 947-5-1 appendix A Q600 DC-13 , Ue = 250 V , Ie = 0.27 A conforming to IEC 947-5-1 appendix A [Ithe] conventional enclosed thermal current 10 A [Ui] rated insulation voltage 600 V , degree of pollution 3 conforming to IEC 60947-1 [Uimp] rated impulse withstand voltage 6 kV conforming to IEC 60947-1 Contacts operation Slow-break Resistance across terminals ≤ 25 mOhm Operating force 13...15 N Short circuit protection Fuse protection by 10 A gG (gl) cartridge fuse Rated operational power in W 40 W DC-13 for 1000000 cycles , operating rate: 3600 cyc/h at 120 V , load fac- tor: 0.5 conforming to IEC 60947-5-1 48 W DC-13 for 1000000 cycles , operating rate: 3600 cyc/h at 48 V , load factor: 0.5 conforming to IEC 60947-5-1 65 W DC-13 for 1000000 cycles , operating rate: 3600 cyc/h at 24 V , load factor: 0.5 conforming to IEC 60947-5-1 Product weight 0.015 kg Environment Standards CSA C22-2 No 14 EN/IEC 60204-32 EN/IEC 60947-5-1 UL 508 Ambient air temperature for operation -25...70 °C Ambient air temperature for storage -40...70 °C Vibration resistance 15 gn (f = 10...500 Hz) conforming to IEC 60068-2-6 Shock resistance 100 gn conforming to IEC 60068-2-27 Class of protection against electric shock Class II conforming to IEC 61140 Feb 8, 2012 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.