Characteristics Keypads 0 Non encoded output 12, 16, 20 and 54 key General These dust and damp protected compact keypads, incorporating tactile feedback keys, are ideal for use in industrial environments. 4 models available: b 12 key, b 16 key, b 20 key, b 54 function keys (alphanumeric). The keypads are constructed using a single piece elastomer membrane, with the keys moulded in. A rigid support is incorporated for mounting on the panel. b The degree of protection with respect to the panel is ensured either by compression of the membrane or by a seal. b The keys are marked by hot die transfer. Keys may be customised (see Order form, pages 35042/5 to 35042/7). Environment Protective treatment Standard version “TC” and “TH” Ambient air temperature For operation °C - 5…+ 70 For storage °C - 40…+ 80 Degree of protection Conforming to IEC 529 and IP 65 NF C 20 010 Materials in contact with external environment Good resistance to the most severe industrial environments. Types of materials: please consult your Regional Sales OfŢ ce. Contact bounce time Non encoded keypads ms y 5 Mechanical life In millions of operating cycles 3 Key colours Grey RAL 7032 and beige RAL 1019 Key travel mm 2 Operating force With tactile feedback N 4 Mounting 12 and 16-way keypads Surface mounting (Ţ xing by keypad base onto panel) 12, 16, 20 and 54-way keypads Flush mounting (Ţ xing from rear of panel into cut-out) Type of connection Non encoded keypads: straight gold plated male connector or 0.3 m ribbon cable + gold plated female connector Keypads with non encoded output Type of contact By gold or silver contact module soldered to printed circuit Switching compatibility Gold contacts TTL or CMOS, nominal rating: 5 V - 0.5 mA Silver contacts Compatibility with PLCs Insulation resistance MΩ > 100 Discharge voltage withstand Conforming to IEC 801-2 kV y 12 ; safety class 3 Operational power Gold contacts 5 V - 0.5 mA Silver contacts 48 V - 200 mA Dielectric strength kV u 2.5 Output mode Depending on model Common point or matrix Voltage/current operating zone V Volts olts 48 48 24 24 15 15 5 5 Gold contacts Gold contacts I (mA) I (mA) Silver contacts Silver contacts 0,01 0,01 5 5 10 10 30 30 200 200 References: References: References: References: Dimensions: Dimensions: Dimensions: Dimensions: Schemes: Schemes: Schemes: Schemes: p p p pa a a ag g g ges 35042/3 and 35042/4 es 35042/3 and 35042/4 es 35042/3 and 35042/4 es 35042/3 and 35042/4 p p p pa a a ag g g ges 35045/2 and 35045/3 es 35045/2 and 35045/3 es 35045/2 and 35045/3 es 35045/2 and 35045/3 p p p pa a a ag g g ges 35045/4 and 35045/7 es 35045/4 and 35045/7 es 35045/4 and 35045/7 es 35045/4 and 35045/7 2 35042-EN_Ver4.0.indd References Keypads 0 Non encoded output 12 and 16 key References 12-way keypads Fixing method Output mode Type of connection Contact Reference Weight kg Fixing from rear of panel Common point Straight, gold plated Gold XBL C1012F181 0.060 into cut-out male connector Silver XBL C1012F111 0.060 (ţ ush mounting) 0.3 m ribbon cable + Gold XBL C1012F184 0.080 gold plated female Silver XBL C1012F114 0.080 connector Matrix Straight, gold plated Gold XBL C1012F281 0.060 male connector Silver XBL C1012F211 0.060 0.3 m ribbon cable + Gold XBL C1012F284 0.080 gold plated female Silver XBL C1012F214 0.080 connector Fixing by keypad base Common point Straight, gold plated Gold XBL C1012R181 0.080 XBL XBL C1012R C1012Rppp ppp onto panel male connector Silver XBL C1012R111 0.080 (surface mounting) 0.3 m ribbon cable + Gold XBL C1012R184 0.100 gold plated female Silver XBL C1012R114 0.100 connector Matrix Straight, gold plated Gold XBL C1012R281 0.080 male connector Silver XBL C1012R211 0.080 0.3 m ribbon cable + Gold XBL C1012R284 0.100 gold plated female Silver XBL C1012R214 0.100 connector 16-way keypads Fixing method Output mode Type of connection Type of contact Reference Weight kg Fixing from rear of panel Common point Straight, gold plated Gold XBL C1016F181 0.080 XBL XBL C1016R C1016Rppp ppp into cut-out male connector Silver XBL C1016F111 0.080 (ţ ush mounting) 0.3 m ribbon cable + Gold XBL C1016F184 0.100 gold plated female Silver XBL C1016F114 0.100 connector Matrix Straight, gold plated Gold XBL C1016F281 0.080 male connector Silver XBL C1016F211 0.080 0.3 m ribbon cable + Gold XBL C1016F284 0.100 gold plated female Silver XBL C1016F214 0.100 connector XBL XBL Z51 Z511 1 Fixing by keypad base Common point Straight, gold plated Gold XBL C1016R181 0.100 onto panel male connector Silver XBL C1016R111 0.100 (surface mounting) 0.3 m ribbon cable + Gold XBL C1016R184 0.120 gold plated female Silver XBL C1016R114 0.120 connector Matrix Straight, gold plated Gold XBL C1016R281 0.100 XBL XBL Z512 Z512 male connector Silver XBL C1016R211 0.100 0.3 m ribbon cable + Gold XBL C1016R284 0.120 gold plated female Silver XBL C1016R214 0.120 connector Note: For speciŢ c 12 and 16-way non encoded keypads, see Order form on pages 35042/5 and 35042/6. Accessories for 12 and 16-way keypads Description Reference Weight kg Connecting ribbon cable 18-way XBL Z511 0.027 length 0.50 m Straight male connector 2 x 10-way XBL Z512 0.003 for soldering onto printed circuit board Assembly: frame, seal and Ţ xings for surface For 12-way keypads XBL Z612 0.033 mounting of a ţ ush mounting type keypad XBL XBL Z612 Z612 For 16-way keypads XBL Z616 0.040 Note: It is possible to convert the 2 x 10-way female connector/ribbon cable to a screw terminal type connector by using an AB1 BCP20235U plug-in terminal block. Please consult your Regional Sales OfŢ ce. Characteristics: Characteristics: Characteristics: Characteristics: Dimensions: Dimensions: Dimensions: Dimensions: Schemes: Schemes: Schemes: Schemes: p p p pa a a ag g g ge 35042/2 e 35042/2 e 35042/2 e 35042/2 p p p pa a a ag g g ge 35045/2 e 35045/2 e 35045/2 e 35045/2 p p p pa a a ag g g ges 35045/4 and 35045/5 es 35045/4 and 35045/5 es 35045/4 and 35045/5 es 35045/4 and 35045/5 35042-EN_Ver4.0.indd 3 References (continued) Keypads 0 Non encoded output 20 and 54 key References (continued) 20-way keypads Fixing method Output mode Type of connection Contact Reference Weight kg Fixing from rear of panel Matrix Straight, gold plated Gold XBL C1020F281 0.120 into cut-out (ţ ush mounting) male connector Silver XBL C1020F211 0.120 0.3 m ribbon cable + Gold XBL C1020F284 0.140 gold plated female connector Silver XBL C1020F214 0.140 XBL XBL C1020F2 C1020F2pp pp 54-way alphanumeric keypads Fixing Type of Output mode Type of connection Contact Reference Weight method contact kg Fixing from Gold or silver Matrix Elbowed, gold plated Gold XBL C1054F282 0.380 rear of panel (recommend- male connector into cut-out ed for very Silver XBL C1054F212 0.380 (ţ ush dirty or dusty mounting) environments) 0.3 m ribbon cable + Gold XBL C1054F284 0.400 XBL XBL C1054F C1054Fppp ppp gold plated female connector Silver XBL C1054F214 0.400 Conductive Matrix Elbowed, gold plated – XBL C1054F222 0.380 silicone male connector 0.3 m ribbon cable + – XBL C1054F224 0.400 gold plated female connector These keypads include 2 keys with a red LED (10 mA max.) for the functions “Shift lock” and “Control” (CTRL), the connections of which are brought out separately, in addition to those of the “Shift” key (resistor to be connected in series, see scheme on page 35045/7). XBL XBL Y01 Y01 Note: For speciŢ c 20 and 54-way non encoded keypads, see Order form on pages 35042/5 to 35042/7. Separate components for 12 and 54-way keypads Description Unit reference Weight kg White legends (blank) For keys without LED XBL Y01 0.002 XBL XBL Y02 Y02 (sold in sheets of 40 legends) For keys with LED XBL Y02 0.002 Characteristics: Characteristics: Characteristics: Characteristics: Dimensions: Dimensions: Dimensions: Dimensions: Schemes: Schemes: Schemes: Schemes: page 35042/2 page 35042/2 page 35042/2 page 35042/2 page 35045/3 page 35045/3 page 35045/3 page 35045/3 pages 35045/6 and 35045/7 pages 35045/6 and 35045/7 pages 35045/6 and 35045/7 pages 35045/6 and 35045/7 4 35042-EN_Ver4.0.indd Order form for speciŢ c Keypads 0 Non encoded output keypads (specimen suitable 54 key for photocopying) Customer Schneider Electric Industries Company Order N° Delivery date Sales ofŢ ce - Subsidiary Co. Order N° These keypads are identical to the standard types except that they may be customised by: b Using keys of alternative colours. b Marking individual keys with characters or symbols as shown on pages 35044/2 and 35044/3. b Using keys with transparent plunger caps, enabling blank white legends to be inserted (1). b Fitting a ribbon cable longer or shorter than the standard length. Basic reference to be completed Number of XBL C 0 5 4 F 2 identical keypads Type of contact Gold 8 Conductive silicone 2 Silver 1 Type of connection Elbowed, gold plated male connector 2 Ribbon cable + gold plated female IDC connector, length 30 cm 4 Ribbon cable pp Length other than 30 cm, please specify in cm (max.: 90 cm, in steps of 10 cm) L Directions for use For each key of the keypad select: b The colour, by ticking the appropriate box: v B for beige, v G for grey. b The character or number (indicate clearly on the diagram), v or a character or symbol selected from pages 35044/2 and 35044/3 (indicate the reference clearly on the diagram). Note: For a legend holder (transparent plunger cap for white legend) (1), mark 2 oblique strokes. For a black matching blanking plug in unused ways, mark a cross. 54-way keypad (front view) B B B B B B B B B B B B B B B B B B B B B B B B B B B B G G G G G G G G G G G G G G G G G G G G G G G G G G G G B B B B B B B B B B B B B B B B B B B B B B B B B B G G G G G G G G G G G G G G G G G G G G G G G G G G B B B B B B B B B B B B B B B B B B B B B B B B B B G G G G G G G G G G G G G G G G G G G G G G G G G G B B B B B B B B B B B B B B B B B B B B B B B B B B B B G G G G G G G G G G G G G G G G G G G G G G G G G G G G B B B B SP SPACE ACE SP SPACE ACE G G G G p Red LEDs (connect resistor in series, see scheme on page 35045/7). Example of form completion B B B B B B G G G G G G G G (1) For blank white legends, see references page 35042/4. Characteristics: Characteristics: Characteristics: Characteristics: References: References: References: References: Dimensions: Dimensions: Dimensions: Dimensions: Schemes: Schemes: Schemes: Schemes: p p p pa a a ag g g ge 35042/2 e 35042/2 e 35042/2 e 35042/2 p p p pa a a ag g g ges 35042/3 and 35042/4 es 35042/3 and 35042/4 es 35042/3 and 35042/4 es 35042/3 and 35042/4 p p p pa a a ag g g ge 35045/3 e 35045/3 e 35045/3 e 35045/3 p p p pa a a ag g g ges 35045/6 and 35045/7 es 35045/6 and 35045/7 es 35045/6 and 35045/7 es 35045/6 and 35045/7 35042-EN_Ver4.0.indd 5 Order form for speciŢ c Keypads 0 Non encoded output keypads (specimen suitable 12, 16 and 20 key for photocopying) Customer Schneider Electric Industries Company Order N° Delivery date Sales ofŢ ce - Order N° Subsidiary Co. Reference (completed reference from page 35042/7) Number of XBL C 5 identical keypads Directions for use For each key of the keypad select: b The colour, by ticking the appropriate box: v B for beige, v G for grey. b The character or number (indicate clearly on the diagram), v or a character or symbol selected from pages 35044/2 and 35044/3 (indicate the reference clearly on the diagram). Note: For a legend holder (transparent plunger cap for white legend) (1), mark 2 oblique strokes. For a black matching blanking plug in unused ways, mark a cross. 12-way keypad 16-way keypad B B B B B B B B B B B B B B G G G G G G G G G G G G G G B B B B B B B B B B B B B B G G G G G G G G G G G G G G B B B B B B B B B B B B B B G G G G G G G G G G G G G G B B B B B B B B B B B B B B G G G G G G G G G G G G G G 20-way keypad Example of form completion B B B B B B B B B B B B B B B B G G G G G G G G G G G G G G G G B B B B B B B B B B G G G G G G G G G G B B B B B B B B B B G G G G G G G G G G B B B B B B B B B B G G G G G G G G G G (1) For blank white legends, see references page 35042/4. Characteristics: Characteristics: Characteristics: Characteristics: References: References: References: References: Dimensions: Dimensions: Dimensions: Dimensions: Schemes: Schemes: Schemes: Schemes: p p p pa a a ag g g ge 35042/2 e 35042/2 e 35042/2 e 35042/2 p p p pa a a ag g g ges 35042/3 and 35042/4 es 35042/3 and 35042/4 es 35042/3 and 35042/4 es 35042/3 and 35042/4 p p p pa a a ag g g ge 35045/3 e 35045/3 e 35045/3 e 35045/3 p p p pa a a ag g g ges 35045/6 and 35045/7 es 35045/6 and 35045/7 es 35045/6 and 35045/7 es 35045/6 and 35045/7 6 35042-EN_Ver4.0.indd Directions for completing Keypads 0 Non encoded output Order form 12, 16 and 20 key These keypads are identical to the standard types except that they may be customised by: b Using keys of alternative colours. b Marking individual keys with characters or symbols as shown on pages 35044/2 and 35044/3. b Using keys with transparent plunger caps, enabling blank white legends to be inserted (1). b Fitting a ribbon cable longer or shorter than the standard length . Basic reference to be completed (on completion, transfer to page 35042/6) Number of XBL C 5 identical keypads Number of keys 12 keys 01 2 16 keys 01 6 20 keys 02 0 Fixing method (12 and 16 key) Fixing from rear of panel into cut-out (ţ ush mounting) F Fixing by keypad base onto panel (surface mounting) R Fixing method (20 key) Fixing from rear of panel into cut-out (ţ ush mounting) F Output mode (12 and 16 key) Common point 1 Matrix 2 Output mode (20 key) Matrix 2 Type of contact Gold 8 Silver 1 Type of connection Straight, gold plated male connector 1 Ribbon cable + gold plated female IDC connector, length 30 cm 4 Ribbon cable pp Other cable lengths, please specify in cm (max.: 90 cm, in steps of 10) L (1) For blank white legends, see references page 35042/4. Characteristics: Characteristics: Characteristics: Characteristics: References: References: References: References: Dimensions: Dimensions: Dimensions: Dimensions: Schemes: Schemes: Schemes: Schemes: page 35042/2 page 35042/2 page 35042/2 page 35042/2 pages 35042/3 and 35042/4 pages 35042/3 and 35042/4 pages 35042/3 and 35042/4 pages 35042/3 and 35042/4 page 35045/3 page 35045/3 page 35045/3 page 35045/3 pages 35045/6 and 35045/7 pages 35045/6 and 35045/7 pages 35045/6 and 35045/7 pages 35045/6 and 35045/7 35042-EN_Ver4.0.indd 7