Product datasheet XACA6713 Characteristics pendant control station XAC-A - 6 pushbuttons 1 Emergency stop   Main Range of product Harmony XAC Product or component type Pendant control station Control station name XACA Control station type Double insulated Enclosure material Polypropylene Electrical circuit type Control circuit Enclosure type Complete ready for use Control station application Control of single speed hoist motor Control station composition 6 pushbuttons + 1 emergency stop Control button type Fifth pushbutton 1 NO forward slow First pushbutton 1 NO raise, slow Fourth pushbutton 1 NO left, slow Second pushbutton 1 NO lower, slow Sixth pushbutton 1 NO reverse, slow Stop pushbutton Ø 40 mm 1 NC, latching Third pushbutton 1 NO right, slow Contact block name ZB2BE101 for each direction ZB2BE102 for emergency stop Mechanical interlocking With mechanical interlocking between pairs Complementary Control station colour Yellow Connections - terminals Screw clamp terminals, connection capacity: 1 x 0.5...1 x 2.5 mm² without cable end Screw clamp terminals, connection capacity: 1 x 0.5...2 x 1.5 mm² with cable end Mechanical durability 1000000 cycles Cable entry Rubber sleeve with stepped entry, cable outer diameter: 8...26 mm Contact code designation A600 AC-15, Ue = 240 V, Ie = 3 A conforming to IEC 60947-5-1 appendix A A600 AC-15, Ue = 600 V, Ie = 1.2 A conforming to IEC 60947-5-1 appendix A Q600 DC-13, Ue = 250 V, Ie = 0.27 A conforming to IEC 60947-5-1 appendix A Q600 DC-13, Ue = 600 V, Ie = 0.1 A conforming to IEC 60947-5-1 appendix A [Ithe] conventional enclosed thermal current 10 A [Ui] rated insulation voltage 600 V (degree of pollution: 3) [Uimp] rated impulse withstand voltage 6 kV conforming to IEC 60947-1 Contacts operation Slow-break Resistance across terminals <= 25 MOhm Operating force 10 N for pushbutton 8 N for emergency stop Short circuit protection 10 A fuse protection by cartridge fuse type gG Rated operational power in W 40 W DC-13 for 1000000 cycles, operating rate = 60 cyc/mn at 120 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C 48 W DC-13 for 1000000 cycles, operating rate = 60 cyc/mn at 48 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C 65 W DC-13 for 1000000 cycles, operating rate = 60 cyc/mn at 24 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C Terminals description ISO n°1 (13-14)NO Terminals description ISO n°2 (11-12)NC Terminal identifier (11-12)NC (13-14)NO Product weight 0.845 kg Environment Standards EN/IEC 60204-32 1 / 2 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. EN/IEC 60947-5-1 UL 508 CSA C22.2 No 14 Product certifications CCC GOST Protective treatment TH Ambient air temperature for operation -25...70 °C Ambient air temperature for storage -40...70 °C Vibration resistance 15 gn (f = 10...500 Hz) conforming to IEC 60068-2-6 Shock resistance 100 gn conforming to IEC 60068-2-27 Class of protection against electric shock Class II conforming to IEC 61140 IP degree of protection IP65 conforming to IEC 60529 IK degree of protection IK08 conforming to EN 50102 2 / 2