SCHNEIDER ELECTRIC SDT-120
Specifications
Amps
20
Poles
1
Type
SDT
Volts
120
Datasheet
Schneider Electric-SDT-120-datasheet1-539882816.pdf
263 KiB
Extracted Text
117SIP, 107DIP, 171DIP PCB Mount Miniature Reed Relays/SPDT and SPST 0.5 Amp Rated Miniature Reed Relays Requires Only 0.5 Inch Spacing from Adjacent Relays RoHS Compliant Pins are 0.20 Inch 117SIP on Center for Simple Routing on PCB Can Sustain Lead-Free Re-flow for Pin-Thru-Paste Assembly General Specifications Contact Characteristics Units 117SIP Number and type of Contacts SPST Contact materials Rhodium Current rating A 0.5 Switching voltage ~ V 120 V 200 Minimum Switching Requirement Minimum mA 10 Coil Characteristics Voltage Range V 5….24 Operating Range % of Nominal 80% to 110% Average consumption W 0.29 Drop-out voltage threshold 10% Performance Characteristics Electrical Life Operations @ Rated Current (Resistive) 50,000,000 Mechanical Life Unpowered 100,000,000 Operating time (response time) ms 0.45 ~ Rated insulation voltage Between coil and contact V 500 ~ Dielectric strength Between poles V 500 ~ rms voltage Between contacts V 150 Environment Ambient air temperature Storage °C -40…+85 around the device Operation °C -40…+55 Vibration resistance Operational g-n 20, 10-200 Hz Shock resistance g-n 50 Weight grams 1 117SIP 0.76 MAX 0.29 MAX (19.3) (7.27) 0.125 MIN. 0.34 (3.18) (8.55) 13 5 7 0.3 (7.5) 0.01 (0.25) 0.2 0.02 (5) 0.08 (0.51) (1.97) WHEN SPACING SIP AND DIP RELAYS, THE RELAYS REQUIRE 0.6 1/2 INCH SPACING FROM THE (15.2) SIDE OF THE ADJACENT RELAYS Circuit Board Pin Spacing Viewed from component side DRAWING ENLARGED TO 200% OF ACTUAL SIZE 8/8 Magnecraft Solution Guide 105A Magnecraft Solution Guide 105A 0.1 IN GRID (2.54 MM) 1 7 SECTION 8 www.magnecraft.com 847-441-2540 117SIP, 107DIP, 171DIP PCB Mount Miniature Reed Relays/SPDT and SPST 0.5 Amp Rated Miniature Reed Relays 107DIP 171DIP 107DIP 171DIP 171DIP SPST-NO DPST-NO SPST Rhodium Rhodium Rhodium 0.5 0.5 0.5 120 120 60 100 100 100 10 10 10 5….24 5….24 5….24 80% to 110% 80% to 110% 80% to 110% 0.29 0.29 0.29 10% 10% 10% 50,000,000 50,000,000 50,000,000 100,000,000 100,000,000 100,000,000 1 1 1 1000 1000 1000 1000 1000 1000 200 200 200 -40…+85 -40…+85 -40…+85 -40…+55 -40…+55 -40…+55 20, 10-200 Hz 20, 10-200 Hz 20, 10-200 Hz 50 50 50 1 1 1 107DIP & 171DIP Circuit Board Pin Spacing 0.79 MAX 0.29 MAX Viewed from component side (20.14) (7.37) 0.03 0.1 IN GRID 14 8 (0.64) 0.3 MAX (2.54 MM) (7.62) 0.4 1 7 0.02 0.12 (10.2) 0.01 0.38 (0.51) (3) (0.25) (9.65) 0.6 (15.24) DRAWING ENLARGED TO 200% OF ACTUAL SIZE 8/9 Magnecraft Solution Guide 105A Magnecraft Solution Guide 105A SECTION 8 117SIP, 107DIP, 171DIP PCB Mount Miniature Reed Relays/SPDT and SPST 0.5 Amp Rated Miniature Reed Relays continued Can Survive High Shock to Avoid Can Sustain Lead-Free Re-flow Damage in Harsh Conditions for Pin-Thru-Paste Assembly 107DIP Pins are 0.10 Inch on Center for Simple Routing on PCB Standard Part Numbers BOLD-FACED PART NUMBERS ARE NORMALLY STOCKED Nominal Input Voltage Nominal Coil Resistance (Ω) Part Number Contact Configuration Figure 5 VDC 500 Ω W117SIP-1 SPST-NO A 12 VDC 1000 Ω W117SIP-3 SPST-NO A 24 VDC 2000 Ω W117SIP-5 SPST-NO A 5 VDC 500 Ω W117SIP-22 SPST-NC B 12 VDC 1000 Ω W117SIP-23 SPST-NC B 24 VDC 2200 Ω W117SIP-24 SPST-NC B 5 VDC 500 Ω W117SIP-6 SPST-NO w/ Clamping Diode C 12 VDC 1000 Ω W117SIP-8 SPST-NO w/ Clamping Diode C 24 VDC 2200 Ω W117SIP-10 SPST-NO w/ Clamping Diode C 5 VDC 500 Ω W117SIP-18 SPST-NC w/ Clamping Diode D 12 VDC 1000 Ω W117SIP-25 SPST-NC w/ Clamping Diode D 24 VDC 2200 Ω W117SIP-26 SPST-NC w/ Clamping Diode D 5 VDC 500 Ω W107DIP-1 SPST-NO E 12 VDC 1000 Ω W107DIP-3 SPST-NO E 24 VDC 2000 Ω W107DIP-4 SPST-NO E 5 VDC 500 Ω W107DIP-5 SPST-NO w/ Clamping Diode F 12 VDC 1000 Ω W107DIP-7 SPST-NO w/ Clamping Diode F 24 VDC 2000 Ω W107DIP-8 SPST-NO w/ Clamping Diode F 5 VDC 500 Ω W171DIP-2 SPST-NO G 12 VDC 1000 Ω W171DIP-4 SPST-NO G 24 VDC 2200 Ω W171DIP-5 SPST-NO G 5 VDC 500 Ω W171DIP-7 SPST-NO w/ Clamping Diode H 12 VDC 1000 Ω W171DIP-9 SPST-NO w/ Clamping Diode H 24 VDC 2200 Ω W171DIP-10 SPST-NO w/ Clamping Diode H 5 VDC 500 Ω W171DIP-12 SPST-NC I 12 VDC 1000 Ω W171DIP-14 SPST-NC I 24 VDC 2200 Ω W171DIP-15 SPST-NC I 5 VDC 500 Ω W171DIP-17 SPST-NC w/ Clamping Diode J 12 VDC 1000 Ω W171DIP-19 SPST-NC w/ Clamping Diode J 24 VDC 2200 Ω W171DIP-20 SPST-NC w/ Clamping Diode J 5 VDC 500 Ω W171DIP-21 DPST-NO K 12 VDC 1000 Ω W171DIP-23 DPST-NO K 24 VDC 2200 Ω W171DIP-24 DPST-NO K 5 VDC 500 Ω W171DIP-25 DPST-NO w/ Clamping Diode L 12 VDC 1000 Ω W171DIP-27 DPST-NO w/ Clamping Diode L 24 VDC 2200 Ω W171DIP-28 DPST-NO w/ Clamping Diode L 8/10 Magnecraft Solution Guide 105A Magnecraft Solution Guide 105A SECTION 8 www.magnecraft.com 847-441-2540 117SIP, 107DIP, 171DIP PCB Mount Miniature Reed Relays/SPDT and SPST 0.5 Amp Rated Miniature Reed Relays continued WIRING DIAGRAMS TOP VIEW 1 3 5 7 1 3 5 7 1 3(+) (-)5 7 1 3(+) (-)5 7 Figure A Figure B Figure C Figure D SPST-NO WITHOUT DIODE SPST-NC WITHOUT DIODE SPST-NO WITH DIODE SPST-NC WITH DIODE 14 13 9 8 14 13 9 8 14 13 9 8 14 13 9 8 1 2 67 1 2(+)6 7 12 67 1 2(+) 67 Figure E Figure F Figure G Figure H SPST-NO WITHOUT DIODE SPST-NO WITH DIODE SPST-NO WITHOUT DIODE SPST-NO WITH DIODE 14 13 9 8 14 13 9 8 14 13 9 8 14 13 9 8 0.76 MAX 0.29 MAX (19.3) (7.27) 0.125 MIN. 12 67 1 2(+) 67 1 2 6 7 1 2(+) (-)6 7 0.34 (3.18) (8.55) Figure I Figure J Figure K Figure L SPST-NC WITHOUT DIODE SPST-NC WITH DIODE DPST-NO WITHOUT DIODE DPST-NO WITH DIODE 13 5 7 0.3 (7.5) 0.01 (0.25) 0.2 0.02 (5) 0.08 (0.51) 107DIP & 171DIP CIRCUIT BOARD PIN SPACING (1.97) Circuit Board Pin Spacing VIEWED FROM COMPONENT SIDE 0.6 0.79 MAX 0.29 MAX 117SIP CIRCUIT BOARD PIN SPACING Viewed from component side (TOP VIEW) (15.2) (20.14) (7.37) VIEWED FROM COMPONENT SIDE Circuit Board Pin Spacing (TOP VIEW) Viewed from component side 0.03 0.1 IN GRID 14 8 (0.64) 0.3 MAX (2.54 MM) (7.62) 0.1 IN GRID (2.54 MM) 1 7 0.4 1 7 0.02 0.12 (10.2) 0.01 0.38 (0.51) (3) (0.25) (9.65) 0.6 (15.24) CIRCUIT BOARD PIN SPACINGS ENLARGED TO 200% OF ACTUAL SIZE 8/11 Magnecraft Solution Guide 105A Magnecraft Solution Guide 105A SECTION 8
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the SDT-120?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods