Product data sheet LC1D09N7 Characteristics TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 9 A - 415 V AC coil Main Range of product TeSys D Product or component Contactor type Device short name LC1D Contactor application Motor control Resistive load Utilisation category AC-1 AC-3 Poles description 3P Power pole contact 3 NO composition [Ue] rated operational <= 690 V DC for power circuit voltage <= 690 V AC 25...400 Hz for power circuit [Ie] rated operational 9 A (<= 60 °C) at <= 440 V AC AC-3 for power cir- current cuit 25 A (<= 60 °C) at <= 440 V AC AC-1 for power cir- cuit Motor power kW 5.5 kW at 660...690 V AC 50/60 Hz 5.5 kW at 500 V AC 50/60 Hz 4 kW at 415...440 V AC 50/60 Hz 4 kW at 380...400 V AC 50/60 Hz 2.2 kW at 220...230 V AC 50/60 Hz Motor power HP (UL / 7.5 hp at 575/600 V AC 50/60 Hz for 3 phases mo- CSA) tors 5 hp at 460/480 V AC 50/60 Hz for 3 phases motors 2 hp at 230/240 V AC 50/60 Hz for 3 phases motors 2 hp at 200/208 V AC 50/60 Hz for 3 phases motors 1 hp at 230/240 V AC 50/60 Hz for 1 phase motors 0.5 hp at 115 V AC 50/60 Hz for 1 phase motors Control circuit type AC 50/60 Hz Control circuit voltage 415 V AC 50/60 Hz Auxiliary contact com- 1 NO + 1 NC position [Uimp] rated impulse 6 kV conforming to IEC 60947 withstand voltage Overvoltage category III [Ith] conventional free 10 A at <= 60 °C for signalling circuit air thermal current 25 A at <= 60 °C for power circuit Irms rated making ca- 250 A DC for signalling circuit conforming to IEC pacity 60947-5-1 140 A AC for signalling circuit conforming to IEC 60947-5-1 250 A at 440 V for power circuit conforming to IEC 60947 Rated breaking capac- 250 A at 440 V for power circuit conforming to IEC ity 60947 [Icw] rated short-time 61 A <= 40 °C 1 min power circuit withstand current 30 A <= 40 °C 10 min power circuit 140 A 100 ms signalling circuit 120 A 500 ms signalling circuit 100 A 1 s signalling circuit 210 A <= 40 °C 1 s power circuit 105 A <= 40 °C 10 s power circuit Associated fuse rating 20 A gG at <= 690 V coordination type 2 for power circuit 25 A gG at <= 690 V coordination type 1 for power circuit 10 A gG for signalling circuit conforming to IEC 60947-5-1 Nov 5, 2012 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. Average impedance 2.5 mOhm at 50 Hz - Ith 25 A for power circuit [Ui] rated insulation 600 V for signalling circuit certifications UL voltage 600 V for signalling circuit certifications CSA 690 V for signalling circuit conforming to IEC 60947-1 600 V for power circuit certifications UL 600 V for power circuit certifications CSA 690 V for power circuit conforming to IEC 60947-4-1 Electrical durability 2 Mcycles 9 A AC-3 at Ue <= 440 V 0.6 Mcycles 25 A AC-1 at Ue <= 440 V Power dissipation per 0.2 W AC-3 pole 1.56 W AC-1 Safety cover With Mounting support Plate Rail Standards EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508 CSA C22.2 n°14 Product certifications BV CCC CSA DNV GL GOST RINA UL LROS Connections - terminals Control circuit: screw clamp terminals 2 cable(s) 1...4 mm² - cable stiffness: solid - without cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm² - cable stiffness: solid - without cable end Control circuit: screw clamp terminals 2 cable(s) 1...2.5 mm² - cable stiffness: flexible - with cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm² - cable stiffness: flexible - with cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm² - cable stiffness: flexible - without cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm² - cable stiffness: flexible - without cable end Power circuit: screw clamp terminals 2 cable(s) 1...4 mm² - cable stiffness: solid - without cable end Power circuit: screw clamp terminals 1 cable(s) 1...4 mm² - cable stiffness: solid - without cable end Power circuit: screw clamp terminals 2 cable(s) 1...2.5 mm² - cable stiffness: flexible - with cable end Power circuit: screw clamp terminals 1 cable(s) 1...4 mm² - cable stiffness: flexible - with cable end Power circuit: screw clamp terminals 2 cable(s) 1...4 mm² - cable stiffness: flexible - without cable end Power circuit: screw clamp terminals 1 cable(s) 1...4 mm² - cable stiffness: flexible - without cable end Tightening torque Control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2 Control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm Power circuit: 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2 Power circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm Operating time 4...19 ms opening 12...22 ms closing Safety reliability level B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 Mechanical durability 15 Mcycles Operating rate 3600 cyc/h at <= 60 °C 2 Complementary Coil technology Without built-in suppressor module Control circuit voltage limits 0.85...1.1 Uc at 60 °C operational 60 Hz 0.8...1.1 Uc at 60 °C operational 50 Hz 0.3...0.6 Uc at 60 °C drop-out 50/60 Hz Inrush power in VA 70 VA at 20 °C (cos ϕ 0.75) 50 Hz 70 VA at 20 °C (cos ϕ 0.75) 60 Hz Hold-in power consumption in VA 7 VA at 20 °C (cos ϕ 0.3) 50 Hz 7.5 VA at 20 °C (cos ϕ 0.3) 60 Hz Heat dissipation 2...3 W at 50/60 Hz Auxiliary contacts type Type mirror contact (1 NC) conforming to IEC 60947-4-1 Type mechanically linked (1 NO + 1 NC) conforming to IEC 60947-5-1 Signalling circuit frequency 25...400 Hz Minimum switching current 5 mA for signalling circuit Minimum switching voltage 17 V for signalling circuit Non-overlap time 1.5 ms on energisation (between NC and NO contact) 1.5 ms on de-energisation (between NC and NO contact) Insulation resistance > 10 MOhm for signalling circuit Environment IP degree of protection IP2x front face conforming to IEC 60529 Protective treatment TH conforming to IEC 60068-2-30 Pollution degree 3 Ambient air temperature for operation -5...60 °C Ambient air temperature for storage -60...80 °C Permissible ambient air temperature around the de- -40...70 °C at Uc vice Operating altitude 3000 m without derating in temperature Fire resistance 850 °C conforming to IEC 60695-2-1 Flame retardance V1 conforming to UL 94 Mechanical robustness Shocks contactor closed 15 Gn for 11 ms Shocks contactor open 10 Gn for 11 ms Vibrations contactor closed 4 Gn, 5...300 Hz Vibrations contactor open 2 Gn, 5...300 Hz Height 77 mm Width 45 mm Depth 86 mm Product weight 0.32 kg 3