References TeSys contactors For motor control up to 75 kW at 400 V, in category AC-3 Control circuit: a.c., d.c. or low consumption 3-pole contactors for connection by screw clamp terminals or connectors (1) Standard power ratings Rated Instantan- Basic reference. Weight of 3-phase motors opera- eous Complete with code indicating (4) 50/60 Hz in category AC-3 tional auxiliary control circuit voltage (2) (θ ≤ 60 °C) current contacts Fixing (3) in AC-3 220V 380V 660V 440 V 230V 400V 415V 440V 500V 690V 1000V up to kW kW kW kW kW kW kW A kg 2.2 4 4 4 5.5 5.5 – 9 11 LC1-D09// (5) 0.320 LC1-D09// 3 5.5 5.5 5.5 7.5 7.5 – 12 11 LC1-D12// (5) 0.325 4 7.5 9910 10 – 18 11 LC1-D18// (5) 0.330 5.5 11 11 11 15 15 – 25 11 LC1-D25// (5) 0.370 7.5 15 15 15 18.5 18.5 – 32 11 LC1-D32// (5) 0.375 9 18.5 18.5 18.5 18.5 18.5 – 38 11 LC1-D38// (5) 0.380 2 11 18.5 22 22 22 30 22 40 11 LC1-D40// (5) 1.400 15 22 25 30 30 33 30 50 11 LC1-D50// (5) 1.400 18.53037373737 37 65 11 LC1-D65// 1.400 LC1-D25// 22 37 45 45 55 45 45 80 11 LC1-D80// 1.590 25 45 45 45 55 45 45 95 11 LC1-D95//� 1.610 30 55 59 59 75 80 75 115 11 LC1-D115// 2.500 40 75 80 80 90 100 90 150 11 LC1-D150// 2.500 (1) 3-pole contactors for connection by lugs or bars Insert the digit 6 before the voltage code in the references selected above. Example: LC1-D09// becomes LC1-D096//. Accessories Auxiliary contact blocks and modules: see pages 2/16 to 2/23. (1) See note (1) on next page. (2) Control circuit voltages. LC1-D95// a.c. supply Volts 24 42 48 110 115 220 230 240 380 400 415 440 500 LC1-D09...D150 (D115 and D150 coils with integral suppression device fitted as standard) 50/60 Hz B7 D7 E7 F7 FE7 M7 P7 U7 Q7 V7 N7 R7 – d.c. supply Volts 12 24 36 48 60 72 110 125 220 250 440 LC1-D09...D38 (coils with integral suppression device fitted as standard) U 0.7…1.25 Uc JD BD CD ED ND SD FD GD MD UD RD LC1-D40...D95 U 0.85…1.1 Uc JD BD CD ED ND SD FD GD MD UD RD U 0.75…1.2 Uc JW BW CW EW – SW FW – MW – – LC1-D115 and D150 (coils with integral suppression device fitted as standard) U 0.75…1.2 Uc – BD – ED ND SD FD GD MD UD RD Low consumption Volts $ 5244872 LC1-D09...D38 (coils with integral suppression device fitted as standard) U 0.7…1.25 Uc AL BL EL SL For other voltages between 5 and 690 V, see pages 2/26 to 2/31. (3) LC1-D09 to D38: clip-on mounting on 35 mm � rail AM1-DP or screw fixing. LC1-D40 to D95 ": clip-on mounting on 35 mm or 75 mm � rail AM1-DL or screw fixing. LC1-D115// LC1-D40 to D95 $: clip-on mounting on 75 mm � rail AM1-DL or screw fixing. LC1-D115 and D150: clip-on mounting on 2 x 35 mm � rails AM1-DP or screw fixing. (4) The weights indicated are for contactors with a.c. control circuit. For d.c. or low consumption control circuit, add 0.160 kg for contactors LC1-D09 to D38, 0.785 kg for contactors LC1-D40 to D65 and 1 kg for contactors LC1-D80 and D95. (5) For purchase in bulk packs, see page i/7. Selection: Characteristics: Dimensions: Schemes: pages 1/6 to 1/35 pages 2/32 to 2/37 pages 2/44 to 2/47 pages 2/48 and 2/49 Schneider Electric 2/6 105517 810353 810352 810356 References TeSys contactors For motor control up to 15 kW at 400 V, in category AC-3 Control circuit: a.c., d.c. or low consumption 3-pole contactors for connection by spring terminals (1) Standard power ratings Rated Instantan- Basic reference. Weight of 3-phase motors opera- eous Complete with code indicating (4) 50/60 Hz in category AC-3 tional auxiliary control circuit voltage (2) (θ ≤ 60 °C) current contacts Fixing (3) in AC-3 220V 380V 660V 440 V 230V 400V 415V 440V 500V 690V up to kW kW kW kW kW kW A kg 2.2 4 4 4 5.5 5.5 9 11 LC1-D093// (5) 0.320 3 5.5 5.5 5.5 7.5 7.5 12 11 LC1-D123// (5) 0.325 47.5991010 1811LC1-D183// (5) 0.330 LC1-D123// 5.5 11 11 11 15 15 25 11 LC1-D253// (5) 0.370 7.5 15 15 15 18.5 18.5 32 (6) 1 1 LC1-D323// (5) 0.375 3-pole contactors for connection by Faston connectors (1) 2 These contactors are fitted with Faston connectors: 2 x 6.35 mm on the power poles and 1 x 6.35 mm or 2 x 2.8 mm on the coil and auxiliary terminals. For contactors LC1-D09 and LC1-D12 only, replace the digit 3 with a 9 in the references selected above. Example: LC1-D093// becomes LC1-D099//. Accessories Auxiliary contact blocks and modules: see pages 2/16 to 2/23. LC1-D129// (1) 3-pole contactors LC1-D09 to D150 can be supplied without safety cover. To order, insert the digit 5 before the voltage code in the references selected from either above or the previous page. Examples: LC1-D09// becomes LC1-D095// LC1-D096// becomes LC1-D0965// LC1-D099// becomes LC1-D0995// LC1-D093// becomes LC1-D0935// (2) Control circuit voltages. a.c. supply Volts 24 42 48 110 115 220 230 240 380 400 415 440 LC1-D09...D32 50/60 Hz B7 D7 E7 F7 FE7 M7 P7 U7 Q7 V7 N7 R7 d.c. supply Volts 12 24 36 48 60 72 110 125 220 250 440 LC1-D09...D32 (coils with integral suppression device fitted as standard) U 0.7…1.25 Uc JD BD CD ED ND SD FD GD MD UD RD Low consumption Volts $ 524 48 72 LC1-D09...D32 (coils with integral suppression device fitted as standard) U 0.7…1.25 Uc AL BL EL SL For other voltages between 5 and 690 V, see pages 2/26 to 2/31. (3) LC1-D09 to D32: clip-on mounting on 35 mm � rail AM1-DP or screw fixing. (4) The weights indicated are for contactors with a.c. control circuit. For d.c. or low consumption control circuit, add 0.160 kg for contactors LC1-D09 to D32. (5) For purchase in bulk packs, see page i/7. (6) For use with power connection module LAD-34 or Quickfit technology outgoing terminal block LAD-33 (Available 4th Quarter 2001), see page 4/9. Selection: Characteristics: Dimensions: Schemes: pages 1/6 to 1/35 pages 2/32 to 2/37 pages 2/44 to 2/47 pages 2/48 and 2/49 Schneider Electric 2/7 810359 810358 References TeSys contactors For control in utilisation category AC-1, 25 to 200 A Control circuit: a.c., d.c. or low consumption 3-pole contactors for connection by screw clamp terminals or connectors (1) Non inductive loads Number Instantaneous Basic reference. Weigh maximum current of poles t (θ ≤ 60 °C) auxiliary Complete with code indicating (4) utilisation category contacts control circuit voltage (2) AC-1 Fixing (3) A kg 25 311 LC1-D09// (5) 0.320 or LC1-D12// (5) (6) 0.325 32 311 LC1-D18// (5) 0.330 LC1-D129// 40 311 LC1-D25// (5) 0.370 50 311 LC1-D32// (5) 0.375 or LC1-D38// (5) (6) 0.380 60 311 LC1-D40// (5) 1.400 2 80 311 LC1-D50// (5) 1.400 or LC1-D65// (6) 1.400 125 311 LC1-D80// 1.590 or LC1-D95// (6) 1.610 200 311 LC1-D115// 2.500 or LC1-D150// (6) 2.500 (1) 3-pole contactors for connection by lugs or bars Insert the digit 6 before the voltage code in the references selected above. Example: LC1-D09// becomes LC1-D096//. 3-pole contactors for connection by Faston connectors (1) These contactors are fitted with Faston connectors: 2 x 6.35 mm on the power poles and 1 x 6.35 mm on the coil terminals. For contactors LC1-D09 and LC1-D12 only, insert the digit 9 before the voltage code in the references selected above. Example: LC1-D09// becomes LC1-D099//. 3-pole contactors for connection by spring terminals (1) LC1-D123// 20 311 LC1-D093// (5) 0.320 or LC1-D123// (5) (6) 0.325 (7) 25/32 311 LC1-D183// (5) 0.335 Accessories Auxiliary contact blocks and modules: see pages 2/16 to 2/23. (1) 3-pole contactors LC1-D09 to D95 can be supplied without safety cover. To order, insert the digit 5 before the voltage code in the references selected above. Examples: LC1-D09// becomes LC1-D095// LC1-D096// becomes LC1-D0965// LC1-D099// becomes LC1-D0995// LC1-D093// becomes LC1-D0935// (2) See note (2) page 2/9. (3) LC1-D09 to D38 and LC1-DT20 to DT80: clip-on mounting on 35 mm � rail AM1-DP or screw fixing. " � LC1-D40 to D95 : clip-on mounting on 35 mm or 75 mm rail AM1-DL or screw fixing. � LC1 or LP1-D40 to D95 $: clip-on mounting on 75 mm rail AM1-DL or screw fixing. � LC1-D115 and D150: clip-on mounting on 2 x 35 mm rails AM1-DP or screw fixing. (4) The weights indicated are for contactors with a.c. control circuit. For d.c. or low consumption control circuit, add 0.160 kg for contactors LC1-D09 to D38, 0.785 kg for contactors LC1-D40 to D65 and 1 kg for contactors LC1-D80 and D95. (5) For purchase in bulk packs, see page i/7. (6) Selection according to the number of operating cycles, see AC-1 curve, page 1/10. (7) 32 A if the contactor is used with the power connection module LAD-34 or Quickfit technology outgoing terminal block LAD-33, see page 4/9. 25 A without these accessories. Selection: Characteristics: Dimensions: Schemes: pages 1/6 to 1/35 pages 2/32 to 2/37 pages 2/44 to 2/47 pages 2/48 and 2/49 Schneider Electric 2/8 810366 810367 References TeSys contactors For control in utilisation category AC-1, 20 to 200 A Control circuit: a.c., d.c. or low consumption 4-pole contactors for connection by screw clamp terminals or connectors Non inductive loads Number Instantaneous Basic reference. Weigh maximum current of poles t (θ ≤ 60 °C) auxiliary Complete with code indicating (3) utilisation category contacts control circuit voltage (2) AC-1 Fixing (1) A kg 20 4– 1 1 LC1-DT20// 1 0.365 22 1 1 LC1-D098// 1 0.365 25 4– 1 1 LC1-DT25// 1 0.365 22 1 1 LC1-D128// 1 0.365 LC1-DT20 32 4– 1 1 LC1-DT32// 1 0.425 22 1 1 LC1-D188// 1 0.425 40 4– 1 1 LC1-DT40// 1 0.425 22 1 1 LC1-D258// 1 0.425 60 4– 1 1 LC1-DT60// 1 0.425 22 1 1 LC1-D328// 1 0.425 80 4– – – LC1-D65004// 1.440 2 or LP1-D65004// 2.210 22 – – LC1-D65008// 1.450 or LP1-D65008// 2.220 125 4– – – LC1-D80004// 1.760 or LP1-D80004// 2.685 22 – – LC1-D80008// 1.840 or LP1-D80008// 2.910 200 4– – – LC1-D115004// 2.860 4-pole contactors for connection by lugs or bars Insert the digit 6 before the voltage code in the references selected above. Example: LC1-DT20// becomes LC1-DT206//. (Available 2002) 4-pole contactors for connection by spring terminals 20 4– 1 1 LC1-DT203 0.380 22 1 1 LC1-D0983 0.380 25 4– 1 1 LC1-DT253 0.380 22 1 1 LC1-D1283 0.380 32 4– 1 1 LC1-DT323 0.425 22 1 1 LC1-D1883 0.425 40 4– 1 1 LC1-DT403 0.425 22 1 1 LC1-D2583 0.425 Accessories Auxiliary contact blocks and modules: see pages 2/16 to 2/23. (1) See note (1) page 2/8. (2) Control circuit voltages. a.c. supply Volts 24 42 48 110 115 220 230 240 380 400 415 440 500 LC1-D09...D150 and LC1-DT20...DT60 (coils with integral suppression device fitted as standard) 50/60 Hz B7 D7 E7 F7 FE7 M7 P7 U7 Q7 V7 N7 R7 – d.c. supply Volts 12 24 36 48 60 72 110 125 220 250 440 LC1-D09...D38 and LC1-DT20...DT60 (coils with integral suppression device fitted as standard) U 0.7…1.25 Uc JD BD CD ED ND SD FD GD MD UD RD LC1 or LP1-D40...D80 U 0.85…1.1 Uc JD BD CD ED ND SD FD GD MD UD RD U 0.75…1.2 Uc JW BW CW EW – SW FW – MW – – LC1-D115 (coil with integral suppression device fitted as standard) U 0.75…1.2 Uc – BD – ED ND SD FD GD MD UD RD Low consumption Volts $ 524 48 72 LC1-D09...D38 and LC1-DT20...DT60 (coils with integral suppression device fitted as standard) U 0.7…1.25 Uc AL BL EL SL For other voltages between 5 and 690 V, see pages 2/26 to 2/31. (3) The weights indicated are for contactors with a.c. control circuit. For d.c. or low consumption control circuit, add 0.165 kg and for contactors LC1-D80, 1 kg. 1 Available 4th quarter 2001. Selection: Characteristics: Dimensions: Schemes: pages 1/6 to 1/35 pages 2/32 to 2/37 pages 2/44 to 2/47 pages 2/48 and 2/49 Schneider Electric 2/9 105700_1 References TeSys contactors Reversing contactors for motor control up to 75 kW on 400 V in category AC-3, horizontally mounted, pre-assembled Control circuit: a.c., d.c. or low consumption 3-pole reversing contactors for connection by screw clamp terminals or connectors Pre-wired power connections Mechanical interlock without electrical interlocking. Standard power ratings Rated Instantaneous Contactors supplied with coil Weight of 3-phase motors opera- auxiliary Basic reference. Complete with code (3) 50/60 Hz in category AC-3 tional contacts per indicating control circuit voltage (2) current contactor Fixing (1) in AC-3 LC2-D12// (θ ≤ 60°C) 220 V 380 V 660 V 440 V 230 V 400 V 415 V 440 V 500 V 690 V 1000 V up to kW kW kW kW kW kW kW A kg 2.2 4 4 4 5.5 5.5 – 9 11 LC2-D09// (4) 0.687 3 5.5 5.5 5.5 7.5 7.5 – 12 11 LC2-D12// (4) 0.697 47.5 9910 10 – 18 11 LC2-D18// (4) 0.707 5.5 11 11 11 15 15 – 25 11 LC2-D25// (4) 0.787 2 7.5 15 15 15 18.5 18.5 – 32 11 LC2-D32// (4) 0.797 9 18.5 18.5 18.5 18.5 18.5 – 38 11 LC2-D38// (4) 0.807 11 18.5 22 22 22 30 – 40 11 LC2-D40// 2.400 15 22 25 30 30 33 – 50 11 LC2-D50//� 2.400 18.5 30 37 37 37 37 – 65 11 LC2-D65// 2.400 22 37 45 45 55 45 – 80 11 LC2-D80// 3.200 25 45 45 45 55 45 – 95 11 LC2-D95// 3.200 LC2-D50// 30 55 59 59 75 80 75 115 11 LC2-D115// 6.350 40 75 80 80 90 100 90 150 11 LC2-D150// 6.400 3-pole reversing contactors for connection by lugs or bars For reversing contactors LC2-D09 to LC2-D38, LC2-D115 and LC2-D150, insert the digit 6 before the voltage code in the references selected above. Example: LC2-D09// becomes LC2-D096//. Accessories Auxiliary contact blocks and modules: see pages 2/16 to 2/23. (1) LC2-D09 to D38: clip-on mounting on 35 mm � rail AM1-DP or screw fixing. LC2-D40 to D95: clip-on mounting on 35 mm or 75 mm � rail AM1-DL or screw fixing. LC2-D115 and D150: clip-on mounting on 2 x 35 mm � rails AM1-DP or screw fixing. (2) Control circuit voltages. a.c. supply Volts 24 42 48 110 115 220 230 240 380 400 415 440 500 LC2-D09...D150 (D115 and D150 coils with integral suppression device fitted as standard) 50/60 Hz B7 D7 E7 F7 FE7 M7 P7 U7 Q7 V7 N7 R7 – d.c. supply Volts 12 24 36 48 60 72 110 125 220 250 440 LC2-D09...D38 (coils with integral suppression device fitted as standard) U 0.7…1.25 Uc JD BD CD ED ND SD FD GD MD UD RD Low consumption Volts $ 524 48 72 LC2-D09…D38 (coils with integral suppression device fitted as standard) U 0.7…1.25 Uc AL BL EL SL For other voltages between 5 and 690 V, see pages 2/26 to 2/31. (3) The weights indicated are for reversing contactors with a.c. control circuit. For d.c. or low consumption control circuit, add 0.330 kg. (4) For reversing contactors with electrical interlocking pre-wired at the factory, add suffix V to the references selected above. Example: LC2-D09P7 becomes LC2-D09P7V. Selection: Characteristics: Dimensions, schemes: pages 1/6 to 1/35 pages 2/32 to 2/37 pages 2/50 and 2/51 Schneider Electric 2/10 810369 810370 References TeSys contactors Reversing contactors for motor control up to 15 kW on 400 V in category AC-3, horizontally mounted, pre-assembled Control circuit: a.c., d.c. or low consumption 3-pole reversing contactors for connection by spring terminals Pre-wired power connections Mechanical interlock without electrical interlocking. Standard power ratings Rated Instantaneous Contactors supplied with coil Weight of 3-phase motors opera- auxiliary Basic reference. Complete with code (3) 50/60 Hz in category AC-3 tional contacts indicating control circuit voltage (2) current per Fixing (1) in AC-3 contactor (θ ≤ 60°C) 220 V 380 V 660 V 440 V 230 V 400 V 415 V 440 V 500 V 690 V up to kW kW kW kW kW kW A kg LC2-D123// 2.2 4 4 4 5.5 5.5 9 11 LC2-D093// 0.687 3 5.5 5.5 5.5 7.5 7.5 12 11 LC2-D123//� 0.697 47.5 9910 10 18 11 LC2-D183// 0.707 5.5 11 11 11 15 15 25 11 LC2-D253// 0.787 2 7.5 15 15 15 18.5 18.5 32 11 LC2-D323// (4) 0.797 3-pole reversing contactors for connection by Faston connectors These contactors are fitted with Faston connectors: 2 x 6.35 mm on the power poles and 1 x 6.35 mm or 2 x 2.8 mm on the coil and auxiliary terminals. For reversing contactors LC2-D09 and LC2-D12 only, replace the digit 3 with a 9 in the references selected above. Example: LC2-D093// becomes LC2-D099//. Accessories Auxiliary contact blocks and modules: see pages 2/16 to 2/23. (1) LC2-D09 to D38: clip-on mounting on 35 mm � rail AM1-DP or screw fixing. (2) Control circuit voltages. a.c. supply Volts 24 42 48 110 115 220 230 240 380 400 415 440 LC2-D09...D32 50/60 Hz B7 D7 E7 F7 FE7 M7 P7 U7 Q7 V7 N7 R7 d.c. supply Volts 12 24 36 48 60 72 110 125 220 250 440 LC2-D09...D32 (coils with integral suppression device fitted as standard) U 0.7…1.25 Uc JD BD CD ED ND SD FD GD MD UD RD Low consumption Volts $ 524 48 72 LC2-D09...D32 (coils with integral suppression device fitted as standard) U 0.7…1.25 Uc AL BL EL SL For other voltages between 5 and 690 V, see pages 2/26 to 2/29. (3) The weights indicated are for reversing contactors with a.c. control circuit. For d.c. or low consumption control circuit, add 0.330 kg. (4) For use with power connection module LAD-34 or Quickfit technology outgoing terminal block LAD-33 (Available 4th Quarter 2001), see page 4/9. Selection: Characteristics: Dimensions, schemes: pages 1/6 to 1/35 pages 2/32 to 2/37 pages 2/50 and 2/51 Schneider Electric 2/11 810372 References TeSys contactors Changeover contactor pairs for control in utilisation category AC-1, 20 to 200 A, horizontally mounted, pre-assembled Control circuit: a.c. or d.c. 4-pole changeover contactor pairs for connection by screw clamp terminals or connectors Pre-wired power connections LC2-DT20 to LC2-DT60 mechanical interlock without electrical interlocking. LC2-D65 and LC2-D80: Order separately 2 auxiliary contact blocks LAD-N/1 to obtain electrical interlocking between the 2 contactors (see page 2/17). For electrical interlocking incorporated in the mechanical interlock, please call our Customer information centre on 0870 608 8 608. LC2-D115 mechanical interlock with integral, pre-wired electrical interlocking. Utilisation category AC-1 Instantaneous Contactors supplied with coils Weight Non inductive loads auxiliary Basic reference. Complete with code Maximum rated contacts indicating control circuit voltage (2) LC2-DT20 operational current per Fixing (1) (θ < 60 °C) contactor A kg 20 11 LC2-DT20// 1 0.730 2 25 11 LC2-DT25// 1 0.730 32 11 LC2-DT32// 1 0.850 40 11 LC2-DT40// 1 0.850 60 11 LC2-DT60// 1 0.850 –– or LC2-D40004 (3) 2.400 80 –– LC2-D65004// 3.200 125 –– LC2-D80004// 3.200 200 –– LC2-D115004// 7.400 4-pole changeover contactor pairs for connection by lugs or bars 20 11 LC2-DT206// 1 0.730 25 11 LC2-DT256// 1 0.730 32 11 LC2-DT326// 1 0.850 40 11 LC2-DT406// 1 0.850 –– or LC2-D400046 (3) 2.400 60 –– LC2-DT606// 1 0.850 80 –– LC2-D650046// 3.200 125 –– LC2-D800046// 3.200 200 –– LC2-D1150046// 7.400 Accessories Auxiliary contact blocks and add-on modules: see pages 2/16 to 2/23. (1) LC2-DT20 to DT60: clip-on mounting on 35 mm � rail or screw fixing. LC2-D65 and D80: clip-on mounting on 35 mm or 75 mm � rail AM1-DL or screw fixing. LC2-D115: clip-on mounting on 2 x 35 mm � rails AM1-DP or screw fixing. (2) See note (2) next page. (3) For replacement in existing equipment. 1 Available 4th quarter 2001. Selection: Characteristics: Dimensions, schemes: pages 1/6 to 1/35 pages 2/32 to 2/37 pages 2/50 and 2/51 Schneider Electric 2/12 105702_1 References TeSys contactors Changeover contactor pairs for control in utilisation category AC-1, 20 and 25 A, horizontally mounted, pre-assembled Control circuit: a.c. or d.c. 4-pole changeover contactor pairs for connection by spring terminals Pre-wired power connections With mechanical interlock without electrical interlocking. Utilisation category AC-1 Instantaneous Contactors supplied with coils Weight Non inductive loads auxiliary Basic reference. Complete with code Maximum rated contacts indicating control circuit voltage (2) operational current per Fixing (1) (θ < 60 °C) contactor A kg 20 11 LC2-DT203// 0.760 25 11 LC2-DT253// 0.760 2 Accessories Auxiliary contact blocks and add-on modules: see pages 2/16 to 2/23. (1) Clip-on mounting on 35 mm � rail AM1-DP or screw fixing. (2) Control circuit voltages. a.c. supply Volts 24 42 48 110 115 220 230 240 380 400 415 440 500 LC2-DT20…DT60 50/60 Hz B7 D7 E7 F7 FE7 M7 P7 U7 Q7 V7 N7 R7 – d.c. supply Volts 12 24 36 48 60 72 110 125 220 250 440 LC2-DT20…DT60 (coils with integral suppression device fitted as standard) U 0.7…1.25 Uc JD BD CD ED ND SD FD GD MD UD RD Low consumption Volts $ 5 244872 LC2-DT20...DT60 (coils with integral suppression device fitted as standard) U 0.7…1.25 Uc AL BL EL SL For other voltages between 5 and 690 V, see pages 2/26 to 2/31. Selection: Characteristics: Dimensions, schemes: pages 1/6 to 1/35 pages 2/32 to 2/37 pages 2/50 and 2/51 Schneider Electric 2/13