CAL-SBC-710VL - PORTWELL - Industrial Trading

Description

Full-size Socket 478 Pentium 4 32bit/33MHz CPU Card withVGA/LAN

Part Number

CAL-SBC-710VL

Price

Request Quote

Manufacturer

PORTWELL

Lead Time

Request Quote

Category

Single Board Computers

Specifications

Form Factor

PICMG

Ethernet Chipset

Intel 82562EM

System Chipset

Intel MCH

Video Chipset

ATI Rage

BIOS

Award System BIOS | Plug & Play support | Advanced Power Management support | Advanced Configuration & Power Interface support | 4M bits flash ROM

Certification

CE approval | FCC Class A

Chip Set

Intel 845 (MCH) Chipset | PCI V2.2 compliant

CPU Support

Intel Pentium 4 CPU with 256K cache on die, CPU running at 400MHz system bus up to 2GHz+ | Support streaming SIMD instruction

Dimensions

338 mm(L) x 122 mm(W)

Environments

Operating temperatures: 0ºC to 60ºC | Storage temperatures: -20ºC to 80ºC | Relative humidity: 10% to 90% (Non-condensing)

Main Memory

Support SDRAM up to 3GB (Max.) | 168-pin DIMM x 3 | ECC support | No Registered DIMM Support

ON Board 1/O

ITE 8712F-A Server I/O | SIO x 2, with 2 x 16C550 UARTs, 10 pin header x 1, D-Sub 9 pin x1 | PIO x 1, bi-directional, EPP/ECP support, 26 pin connector x 1 | Floppy Disk controller: 34 pin connector x 1 | On chip enhanced IDE x 2, Utra DMA33/66/100 support, 40 pin connector x 2 | External Keyboard 5 pin connector x 1; 6 pin mini DIN connector x 1, for PS/2 keyboard/mouse | On board buzzer x 1 | On board 2 pin header for I2C; GPIO (4 in 4 out) x 1 | On board 5 pin header for IrDA x 1 | On board 2 pin header for reset SW, 5 pin for keylock, 2 pin header for power push button, 3 Pin Jst (5Vsb, PS-On, GND) to Backplane

On Board LAN

Intel ICH2 embedded MAC with Intel 82562EM(PLC) PHY 10/100 Ethernet controller | 10/100 base T/TXx 1 support, full duplex | Compliant with PCI V2.2, IEEE 802.3X | Drivers support: DOS/Windows, Windows 95/98/2000Windows NT, Netware, SCO Open Server 5.0, Linux | RJ45 connector x1 | Support Remote Monitoring (Alerting on LAN)

On Board proprietary PCI interface

32 bit PCI interface for EBK Module

On Board RTC

High precision real time clock/calendar

On Board Solid State Disk Socket

Power header beside IDE connector to support DOM

On Board VGA

ATI Rage 128 Pro (Ultra4XL with 16MB memory on board; 1.5V AGP 4X interface | Fully PC98 and PC99 Compliant

Power Requirements

+5V: 10A (Max.) | +12V: 10A (Max.) | -12V: 50mA (Max.)

System Architecture

Full size SBC with 32bit/33MHz PCI/ISA Golden finger | Intel Socket 478 Pentium 4 with 400MHz System Bus | PCI V 2.0 compliant | PICMG 1.0 (Rev.2.0) compliant

System Monitor

Driver from SuperIO ITE 8712F-A to system monitor controller | 8 voltages (For+1.8V, +3.3V, +5V, -5V, +12V, -12V Vcore and Vcc5Vstand-By | Fan Speed (For CPU) x1; Fan speed (For System) x2 | Temperatures x3;(one for CPU, the others for the system) ISAMAX Support | Maximize ISA signals to support ISA cards up to 20

Watchdog Timer

1~64 seconds time-out intervals

Features

ATI Rage 128 Pro AGP 4X (1.5V) VGA controller with 16MB on die memory
Intel 845 Chipset
Intel ICH2 embedded MAC with Intel 82562EM (PLC) PHY 10/100 Ethernet controller
Intel Socket 478 Pentium 4 CPU with 400MHz System Bus up to 2GHz+
Max. 3GB Memory, 168-pin SDRAM DIMM x 3

Datasheet

PORTWELL-CAL-SBC-710VL-datasheet.pdf

155 KiB

Download

Extracted Text

CAL-SBC-710VL Full-size Socket 478 Pentium 4 32bit/33MHz CPU Card w/VGA/LAN Features ¨ Intel Socket 478 Pentium 4 CPU with 400MHz System Bus up to 2GHz+ ¨ Max. 3GB Memory, 168-pin SDRAM DIMM x 3 ¨ Intel 845 Chipset ¨ ATI Rage 128 Pro AGP 4X (1.5V) VGA controller with 16MB on die memory ¨ Intel ICH2 embedded MAC with Intel 82562EM (PLC) PHY 10/100 Ethernet controller Unit 7 Holloways, Bessemer Close, Ebblake Industrial Estate, Verwood, Dorset, BH31 6AZ Tel: 01202 813816 Fax: 01202 813817 Email: sales@portwell.co.uk www.portwell.co.uk CAL-SBC-710VL Specifications System Architecture ¨ On board buzzer x 1 ¨ Full size SBC with 32bit/33MHz PCI/ISA Golden finger ¨ On board 2 pin header for I2C; GPIO (4 in 4 out) x 1 ¨ Intel Socket 478 Pentium 4 with 400MHz System Bus ¨ On board 5 pin header for IrDA x 1 ¨ PCI V 2.0 compliant ¨ On board 2 pin header for reset SW, 5 pin for keylock, 2 pin ¨ PICMG 1.0 (Rev.2.0) compliant header for power push button, 3 Pin Jst (5Vsb, PS-On, GND) to Backplane CPU Support ¨ On board 4 pin Additional Power Source Input ¨ Intel Pentium 4 CPU with 256K cache on die, CPU running at 400MHz system bus up to 2GHz+ On Board proprietary PCI interface ¨ Support streaming SIMD instruction ¨ 32 bit PCI interface for EBK Module Main Memory On Board Solid State Disk Socket ¨ Support SDRAM up to 3GB (Max.) ¨ Power header beside IDE connector to support DOM ¨ 168-pin DIMM x 3 On Board RTC ¨ ECC support ¨ High precision real time clock/calendar ¨ No Registered DIMM Support System Monitor BIOS ¨ Driver from SuperIO ITE 8712F-A to system monitor ¨ Award System BIOS controller ¨ Plug & Play support ¨ 8 voltages (For+1.8V, +3.3V, +5V, -5V, +12V, -12V Vcore and Vcc5Vstand-By ¨ Advanced Power Management support ¨ Fan Speed (For CPU) x1; Fan speed (For System) x2 ¨ Advanced Configuration & Power Interface support ¨ Temperatures x3;(one for CPU, the others for the system) ¨ 4M bits flash ROM ISAMAX Support Chip Set ¨ Maximize ISA signals to support ISA cards up to 20 ¨ Intel 845 (MCH) Chipset ¨ PCI V2.2 compliant Watchdog Timer ¨ 1~64 seconds time-out intervals On Board VGA ¨ ATI Rage 128 Pro (Ultra4XL with 16MB memory on board; Dimensions 1.5V AGP 4X interface ¨ 338 mm(L) x 122 mm(W) ¨ Fully PC98 and PC99 Compliant Power Requirements On Board LAN ¨ +5V: 10A (Max.) ¨ Intel ICH2 embedded MAC with Intel 82562EM(PLC) PHY ¨ +12V: 10A (Max.) 10/100 Ethernet controller ¨ -12V: 50mA (Max.) ¨ 10/100 base T/TXx 1 support, full duplex ¨ Compliant with PCI V2.2, IEEE 802.3X Environments ¨ Drivers support: DOS/Windows, Windows ¨ Operating temperatures: 0ºC to 60ºC 95/98/2000Windows NT, Netware, SCO Open Server 5.0, ¨ Storage temperatures: -20ºC to 80ºC Linux ¨ Relative humidity: 10% to 90% (Non-condensing) ¨ RJ45 connector x1 Certification ¨ Support Remote Monitoring (Alerting on LAN) ¨ CE approval ON Board 1/O ¨ FCC Class A ¨ ITE 8712F-A Server I/O ¨ SIO x 2, with 2 x 16C550 UARTs, 10 pin header x 1, D-Sub 9 pin x1 ¨ PIO x 1, bi-directional, EPP/ECP support, 26 pin connector x 1 Order Information ¨ Floppy Disk controller: 34 pin connector x 1 PEAK-710VL ¨ On chip enhanced IDE x 2, Utra DMA33/66/100 support, 40 Full size Socket 478 Pentium 4 32bit/33MHz CPU Card w/VGA/LAN pin connector x 2 ¨ External Keyboard 5 pin connector x 1; 6 pin mini DIN con- nector x 1, for PS/2 keyboard/mouse Unit 7 Holloways, Bessemer Close, Ebblake Industrial Estate, Verwood, Dorset, BH31 6AZ Tel: 01202 813816 Fax: 01202 813817 Email: sales@portwell.co.uk www.portwell.co.uk

Frequently asked questions

Industrial Trading' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Industrial Trading will definitely serve you. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Industrial Trading. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products