Industrial Trading

Description

The Most Advanced PICMG SBC Based on Dual Intel Pentium III Processors with Intel Graphics and Ethernet Solutions (RIMM Memory Supported)

Part Number

ACTI-777

Price

Request Quote

Manufacturer

PORTWELL

Lead Time

Request Quote

Category

Single Board Computers

Specifications

Form Factor

PICMG

Ethernet Chipset

Intel 82559

Video Chipset

C&T 69000

Board Type

Full Size

Chipset

C&T 69000 Video display chipset Adopt PCI interface, built-in 2MB VRAM DB15 connector at the rear panel Support display resolution up to 1280x1024, 256 colors
Intel® i840 AGPset, including: 82840 memory controller hub (MCH) 82801 I/O controller hub (ICH) 82802 firmware hub (FWH)

CPU

Support one or two Intel® Pentium® III processors for the PGA370 Socket

Dimensions

338.5(L) x 129(W) mm 13.33"(L) x 5.1"(W) 8-layer PCB

Ethernet

Intel® 82559 PCI fast Ethernet controller RJ-45 connector at the rear panel Support IEEE 802.3 auto-negotiation algorithm of full-duplex and half-duplex operation for 10Mb/s and 100Mb/s (NWAY)

H/W Status Monitoring

Winbond super I/O is used to monitor supply voltages to user programmable voltage levels within 16mV Separately monitor up to three fan tachometer inputs for rotation speeds and three temperatures sense via two thermistors circuit Beep alarms for failed fan out, over/under voltage of DC voltages and over temperature threshold

ISA

Support 64mA high driving capability for ISA-bus slot on backplane

Keyboard & Mouse

Routed to 6-pin mini-DIN on rear bracket Shared 6-pin mini-DIN connector with K/B (Auto-swap)

Memory

Two 184-pin RIMM sockets with max. 2GB capacity

Operating Temperature

0 to 55ºC

Power Supply

+5V@10A (typ.), +12V@300mA, -12V@30mA

Processor

Intel Pentium III

SSD

Support M-Systems' flash disk up to 288MB

Storage Temperature

-20 to 75ºC

Watchdog Timer

Watchdog timeout period programmable via S/W from 0.5 to 254.5 sec./min. Can be enabled/disabled by jumper setting

Features

Dual Pentium III processors based SBC
Full-size all-in-one SBC with PICMG 1.0 Rev. 2.0 compliant
Fully support ATX function with WOL, Modem-Ring On, K/B & Mouse wake-up
Hardware monitoring and watchdog timer for system protection
Intel 82840 Chipset
ISA64 driving capability
On board Intel 82559 10/100 Base-T Ethernet
On board Intel® 82559 10/100 Base-T Ethernet
Onboard 69000 VGA
Onboard Intel 82559 Ethernet
PCI Bus spec V2.1 compliant
Reserve space around IDE interface connector to fit DOM (Disk-On-Module)
Support C&T 69000 chips
Support dual Socket 370 Pentium lII (FC-PGA) processor with 100MHz FSB up to 850MHz
Support dual Socket 370 Pentium® lII (FC-PGA) processor with 100MHz FSB up to 850MHz
Support RAMBUS
Support two channel RDRAM memory up to 2GB
Support Ultra DMA33/66 IDE mode

Datasheet

PORTWELL-ACTI-777-datasheet.pdf

77 KiB

Download

Extracted Text

ACTI-777 ® ® The Most Advanced PICMG SBC Based on Dual Intel Pentium III Processors with Intel Graphics and Ethernet Solutions (RIMM Memory Supported) ® Specifications u Additional Functionality Support dual Socket 370 Pentium III (FC-PGA) processor with 100MHz FSB CPU Integrated Graphics Controller up to 850MHz ® ® u Support one or two Intel Pentium III u C&T 69000 Video display chipset processors for the PGA370 Socket u u Support two channel RDRAM memory up Adopt PCI interface, built-in 2MB VRAM to 2GB u Chipset DB15 connector at the rear panel ® u Intel i810 AGPset, including u Support display resolution up to u Support C&T 69000 chips - 82840 memory controller hub (MCH) 1280x1024x8 bit - 82801 I/O controller hub (ICH) ® u On board Intel 82559 10/100 Base-T Ethernet 10/100 Controller - 82802 firmware hub (FWH) ® Ethernet u Intel 82559 PCI fast Ethernet controller Memory u RJ-45 connector at the rear panel u Two 184-pin RIMM sockets with max. u Support Ultra DMA33/66 IDE mode u Support IEEE 802.3 auto-negotiation 2GB capacity algorithm of full-duplex and half-duplex u PCI Bus spec V2.1 compliant BIOS operation for 10Mb/s and 100Mb/s (NWA Y ) u Award BIOS-Plug-n-Play compatible u Full-sized all-in-one SBC with PICMG 2.0 DiskOnChip Flash Disk compliant On-Board I/O u Support M-Systems' flash disk up to u Support two EIDE channels up to four 288MB u Reserve space around IDE interface HDDs (Ultra DMA 33/66) 2S/1P, two USB System Hardware Monitor connector to fit DOM (Disk-On-Module) ports and one IrDA infrared port u Winbond super I/O is used to monitor Watchdog Timer supply voltages to user programmable u Fully support ATX function with WOL, u Watchdog timeout period programmable voltage levels within 16 mV Modem-Ring On, K/B & Mouse wake-up via S/W from 0.5 to 254.5 sec./min. u Separately monitor up to three fan u u Can be enabled/disabled by jumper setting tachometer inputs for rotation speeds ISA64 driving capability and three temperatures sense via two PS/2 Mouse thermistors circuit u Routed to 6-pin mini-DIN on rear bracket u Beep alarms for failed fan out, over/under u Shared 6-pin mini-DIN connector with voltage of DC voltages, and over K/B (Auto-swap) temperature threshold Power Requirement u +5V@10A (typ.),+12V@300mA, -12V@30mA Ordering Guide Board Dimension ACTI-777 u 338.5(L) x 129(W) mm The most advanced PICMG SBC based u ® ® 13.33"(L) x 5.1"(W) on dual Intel Pentium III processors ® u with Intel graphics and Ethernet 8-layer PCB solutions (RIMM memory supported) Operating Temperature u 0 to +55˚C 1

Frequently asked questions

Industrial Trading' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Industrial Trading will definitely serve you. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Industrial Trading. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products