PARKER CD60M
Specifications
Current programming
Down to 60% of maximum, or 30% with permanent standby
Input levels direct Input impedance
Pull-up resistors (4K7) to +12V (built in)
Input levels direct Input logic level
Low (logic 0) 0 to 2V or short circuit to OV, High (logic 1) +10V to +12V or open circuit
Input via opto motherboard
TTL, low 3.5V, max. input current 20mA
Maximum step frequency
200kHz at 4000 steps/rev
Minimum step pulse width
1µs
Motherboard Fuse (FS1)
10A QA HBC 32mm x 6.3mm
Motor Resolution
400, 1000, 2000, 4000 steps/rev (User-selectable)
Motor supply current max. at 120V
4A (CD60M), 5.5A (CD80M)
Motor supply voltage
+48 to +140VDC (+10%, -15%)
Nominal output current (RMS)CD60M
6A/phase
Nominal output current (RMS)CD80M
7.8A/phase
Output levels direct
Open-collector NPN transistors; +30V max off, 15mA max on
Over-temperature
If heatsink exceeds 85°C (185°F)
Short-circuit
Across phases, between phases and from each phase to ground
Standby Current Reduction
50% or 80% of programmed current, jumper-selectable
Supply fault
Cutout voltage limits UNDERVOLTAGE 170V
Type
Bipolar recirculating switched-mode
Features
- Compact package-10HP (2") front panel
- Compatibility with previous CD drives
- High voltage operation up to 120V
- Mini-stepping built in
- Optimized current profiles
- Programmable motor current
- Programmable standby current reduction
- Single supply operation
Frequently asked questions
How does Industrial Trading differ from its competitors?

Is there a warranty for the CD60M?

Which carrier will Industrial Trading use to ship my parts?

Can I buy parts from Industrial Trading if I am outside the USA?

Which payment methods does Industrial Trading accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods