Manufacturers
PARKER ACR2000
Description
Parker Compumotor ACR2000 CPU Board | Motherboard with 1-2 axis PC-Bus or Standalone Motion Controller 1-4 axis PC-Bus or Standalone Motion Controller
Part Number
ACR2000
Price
Request Quote
Manufacturer
PARKER
Lead Time
Request Quote
Category
Single Board Computers
Features
- 125 nsec - 16 usec stepper pulse width range
- 16-bit DAC resolution (+/- 10 VDC output standard, programmable)
- 32 Optically isolated 24VDC I/O (16 inputs, 16 outputs)
- 32/64 bit Floating Point DSP CPU @ 50MHz
- 4 MHz maximum stepper velocity
- 512K x 8 bytes User Memory (PS and SA Options – User Memory is Battery Backed-Up)
- 512K x 8 Flash Memory (Stores critical parameters and User Programs)
- Free Support Tools including AcroVIEW, C++, Visual Basic, Visual C, and DOS, Windows, or Windows NT Drivers from Acroloop website.
- PC-Bus or Standalone configuration
- Pre-Emptive Multi-Tasker
- Quadrature Encoder channels (0.1 Hz to 8MHz)
- Two 128K x 16 EPROM’s
- Two High Speed Communications FIFO’s(512 x 8)
- User’s Guide, Hardware Manual, and Training Manuals
- Zero Wait State 512K x 8 bytes System Memory
Datasheet
Extracted Text
ACR2000 (1-4 Axes) ISA Bus / Standalone Motion Controller: The ACR2000 is capable of Standalone or PC-bus operation. It has the ability to run up to four servo loops, with up to 4 encoders at 20MHz. It can optionally be equipped with 8 analog inputs through a 12-bit analog/digital converter and introduce these inputs into servo loops. Because of our modular design to our outputs, it is possible to have four axis of servo or four axis of stepper on the same controller. The ACR2000 controller, like the ACR8010, uses a SIMM card for analog outputs or stepper outputs and can be purchased as 2 or 4 axis. Of course, all of Acroloop’s systems run on the same software and firmware, so the standard features and benefits apply to the ACR2000 as well. The ACR2000 is Acroloop Motion Control Systems’ answer to four axis or less affordable high performance control, when flexibility in the field, real-time speed, and ease of programming are most needed. ACR2000 Exclusives: 50 MHz Floating Point DSP. 4 Axes of Servo or Stepper. Up to 4 Encoders at 20 MHz. 128K User/System Memory Expandable to 1/2 Megs each. 32 Optically Isolated 24Volt DC I/O Expandable to 288 I/O. Half Size ISA Size. Up to four Communication Channels. (ISA, COM1, COM2, LPT). Optional RS232/RS485 and AcroWire IEEE-1394 Interface. Detailed Specifications (ACR2000): Performance: Hardware: Multi-tasker Axes/controller 8 coordinate systems, Motion/PLC 1-4 axes programs Communications Trajectory Update PC-Bus or Standalone Every 200-500 micro seconds Processor Servo Update 32/64 bit Floating Point DSP 50 microseconds/axis @50MHz Ladder Logic PLC Trajectory Calc. 200-500 microsecond scan time 64-bit precision Interpolation User Memory Linear, Circular, Sinusoidal, Helical 512KBytes and System Memory Elliptical Splines, Nurbs, 3-D Arcs 512KBytes Servo Loop Firmware PID, Velocity Feedforward, Two 128K x 16 EPROM's Acceleration Flash Memory Feedforward with Notch, LoPass and 512KBytes Size programmable filtering Half- size ISA board Position Reg. Operating System Hardware, < 1 microsecond Real time system independent of Communications PC Simultaneous PC, Serial and LPT ports, AcroWire IEEE-1394 Communications: Software Support: PC Interface Two 512 x 8 hardware FIFO's BAD Standard Lang. Two Serial Ports (RS-232 and/or Visual Basic,Visual C++, C++ RS-422) Program Tools One Parallel Port (8-bits) AcroVIEW Motion/PLC Program Protocols Dev. Tools Binary, String, & ASCII ActiveX/OCX controls Operating System Inputs/Outputs: Windows NT, Windows 95/98, DOS Encoder Inputs 4 (32-bit registers), 8 MHz Additional Firmware Analog Outputs Highlights: up to 4, 16-bit precision Stepper Outputs up to 4, 4 MHz Digital I/O 32, 24VDC · Triggered Floating Point Electronic optically-isolated (expandable to GEARING. · Triggered Segmented Electronic CAM. 320) · On-the-fly position and velocity matching. Auxiliary Analog: · Ladder Logic PLC. · Programmable Limit Switch. Inputs up to 8 (12- bit) · Interruptible moves. · Either analog or digital feedback for position or velocity loops. · Dual encoder feedback. · Mixing of Axes and interpolation. · Teach and Learn functions. · Parameter based with over 15,000. addressable pre-defined hardware registers. · NURBS and Splines. · Spherical Commands. · Automatic Targential Tool Operation. ACR2000 Suggested Accessories ACR2000 Suggested Accessories Part Part Description Number SPL028 Standalone Mounting Bracket +5V (6A), -12V (1A), +12V (2A) DC Power Supply SPS031 (Standalone Power) SPS021 +24VDC, 1.2A Power Supply (Digital I/O Power Supply) Breakout Board for 16In/16Out. Screw Terminals, LED’s Cables. RBB02IO3 SINKING (SnapTrack Mounting) Breakout Board for 16In/16Out. (Screw Terminals, LED’s, Cables). RBB02IO5 SOURCING (SnapTrack Mounting) BreakOut board for COM1,COM2,LPT. (Screw Terminals, LED’s, Cables.) RBB02COM (Snaptrack Mounting) Breakout Board for 4 Encoders (Screw Terminals, LED’s, Cables.) RBB02ENC (Snaptrack Mounting) 2 Axis Breakout Box (Screw Terminals, LED's, Cables, and Enclosure). RBD08432 SINKING 4 Axis Breakout Box (Screw Terminals, LED's, Cables, and Enclosure) RBD08434 SINKING 2 Axis Breakout Box (Screw Terminals, LED's, Cables, and Enclosure). RBD08452 SOURCING RBD08454 4 Axis Breakout Box (Screw Terminals, LED's, Cables, and Enclosure). SOURCING. PWH801XX Analog I/O Cable with 6' flying leads 64 Digital I/O Expansion Board, 24VDC optically-isolated, SBD12400 SINKING 64 Digital I/O Expansion Board, 24VDC optically-isolated, SBD12420 SOURCING Upgrade ADC Option after shipment factory added only, 48 MKT85010 hour burn-in required PWH10506 RS-232 Serial Cable (9 pin D to 9 pin, 6' long) ACR2000 Spare Parts Part Number Part Description SBD08202 2 Axis DAC Board SBD08204 4 Axis DAC Board SBD0872 2 Axis Stepper Board SBD0874 4 Axis Stepper Board SBD12300 ACR2000 Communications Daughterboard (2 serial & 1 parallel ports) MC24401 8 Bit Output Driver, Sinking (2 required per ACR2000, 4 required per XIO Board) MC247 8 Bit Output Driver, Sourcing (2 required per ACR2000, 4 required per XIO Board) 2 Amp Fuse (24VDC Digital I/O Power, 1 required per FU122 ACR2000) FU124 4 Amp Fuse (ACRCOMM, 5VDC, 1 required per board) FU123 ¼ Amp Fuse (ACRCOMM, +/-12VDC, 2 required per board) SMC230(V#) EPROM Set (Specify Version Number) (XX = AX - STD XX Memory or BX = EXP Memory) © Copyright 2002 Parker Hannifin Corp. All rights reserved.
Frequently asked questions
How does Industrial Trading differ from its competitors?
Is there a warranty for the ACR2000?
Which carrier will Industrial Trading use to ship my parts?
Can I buy parts from Industrial Trading if I am outside the USA?
Which payment methods does Industrial Trading accept?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods