PANASONIC BATTERIES AM-1PIX

Industrial Alkaline Batteries Technical Specifications ‘03/‘04 PDF File Technical Specifications Copyright 2003 Matsushita Battery Industrial Co., Ltd. All rights Reserved. No part of this technical handbook pdf file may be changed, altered, reproduced in any form or by any means without the prior written permission of Matsushita Battery Industrial Co., Ltd. NOTICE TO READERS It is the responsibility of each user to ensure that each battery application system is adequately designed safe and compatible with all conditions encountered during use, and in conformance with existing standards and requirements. Any circuits contained herein are illustrative only and each user must ensure that each circuit is safe and otherwise completely appropriate for the desired application. This literature contains information concerning cells and batteries manufactured by Matsushita Battery Industrial Co., Ltd. This information is generally descriptive only and is not intended to make or imply any representation guarantee or warranty with respect to any cells and batteries. Cell and battery designs are subject to modification without notice. All descriptions and warranties are solely as contained in formal offers to sell or quotations made by Matsushita Battery Industrial Co., Ltd., Panasonic Sales Companies and Panasonic Agencies. INDUSTRIAL ALKALINE BATTERIES Outline Applications Portable audio products • Strobes • Cameras Panasonic Industrial Alkaline batteries are designed to • Electronic calculators • Cameras • Electric shav- provide consistent performance and longer lasting ers • Tape recorders • Highpower flash lights • Toys power in industrial and OEM applications. Available • Other cordless products • Pagers • Clocks with convenient shrink wrap or bulk packaging in case • Security devices • Remote controllers • Elec- and pallet quantities to provide excellent cost efficien- tronic door locks cies in higher volume applications. Precautions Features • Improper use of batteries may cause leakage and • Large Current and Large Capacity for an explosion. Therefore, strictly observe the follow- Excellent Performance ing precautions. Large quantities of highly pure manganese dioxide is (1) Install the batteries with the positive (+) and used in the positive-activating substance. The nega- negative (-) polarities in the proper direction. tive-activating substance consists of zinc powder (2) Do not use new and old batteries together. scattered throughout the gelled alkaline electrolyte. (3) Do not use cylindrical alkaline batteries with The result is large reaction area that produces a large other types of batteries. capacity and a large current. (4) Never attempt to short-circuit, disassemble, • Stable Voltage and Current or heat batteries. Do not throw batteries into A caustic alkaline solution is used for the electrolyte a fire. to ensure high conductivity. ‘This maintains a stable • Cylindrical alkaline primary batteries are not voltage and stable current at all times. rechargeable. Charging of primary batteries may • Unsurpassed Resistance to Leakage cause an explosion or leakage which may result The use of a special resin-sealing inlet and special in bodily injury. sealant results in unsurpassed leak-resistance. • Excellent Storage Life Highly pure materials are used to minimize self- discharge, thus ensuring a long storage life. • Contains Less Than 0.0005 Mercury by Weight We’ve replaced mercury with new proprietary materials that allow us to still maintain the high level of performance you expect from Panasonic. • Made in the USA INDUSTRIAL ALKALINE BATTERIES PAGE 2 AUGUST 2003 INDUSTRIAL ALKALINE BATTERIES: SPECIFICATION TABLE Industrial Alkaline Batteries Summary Specification Table 2 Rated Dimensions Model Nominal Rated Rated Weight Volume Size Voltage Terminals Cross Reference 1 Number Voltage Capacity Load (Avg.) (Max.) Diameter Height Length Width Cut-off (Max) (Max.) (Max.) (Max.) 3 3 (V) (mAh) (V) Ω Ω Ω Ω Ω in.(mm) in.(mm) in.(mm) in.(mm) oz(g) in (cm ) ANSI IEC 1.312 2.407 4.97 3.28 Flat or AD M-1PI* 10 .518 7,00 09 . 3 -- 10 3A LR2 (33.3) (61.1) (141) (53.8) Button Top 1.004 1.969 2.47 1.62 Flat or AC M-2PI* 10 .578 ,80 09 . 3 -- 14 4A LR1 (25.5) (50.00) (70) (26.6) Button Top 0.571 1.988 0.84 0.51 AA M-3PI*A510 . 28 .87 05 . 7 -- BA utton Top16 5 LR (14.50) (50.50) (24) (8.4) 0.413 1.752 0.42 0.23 AA M-4PI*A5 A10 . 18 ,15 05 . 7 -- BA utton Top23 4 LR0 (10.49) (44.50) (12) (3.8) 1.909 1.043 0.689 1.65 1.37 6V AM-6PI*9090 . 58 7 40 . 6- 2 SA nap11 604 6LR6 (48.49) (26.49) (17.50) (45) (22.5) * = Typical packaging designator codes (see below) Model Case Pallet Notes: Description Number Qty Qty 1) Rated capacity: For reference only. Actual Ak M-1PII4 nner carton-bul 14 4 518 ratings may vary depending on the discharge Ap M-1FTFXB0 ulk-flat to 10 4 588 rate of the end application and usage conditions. Al M-1FTSFXB0 ulk-flat top-plain silver labe10 4 588 2) Dimensions are IEC/ANSI STANDARDS. Ak M-2PII8 nner carton-bul 20 8 1152 Ap M-2FTFXB4 ulk-flat to 22 3 1123 • Operating Temperature Range is -20°C to 54°C Ak M-3PI/BB0 ul 50 0 3600 Ak M-3PI/2S20 shrink-inner carton-bul 60 0 3240 (-4°F to 130°F) Ak M-4PI/BB0 ul 50 0 7600 • No Mercury Added Ak M-4PI/2S20 shrink-inner carton-bul 50 0 8400 • No Lead Added 6k AM-6PI/BB0 ul 20 1 1701 • No Cadmium Added 6l AM-6S/BB0 ulk-plain silver labe 20 1 1701 • Made in the U.S.A. 6k AM-6PI/1S18 shrink-inner carton-bul 28 8 1612 Disposal Since January 1992 all Panasonic Alkaline batteries are manufactured with “no mercury added”. These batteries are classified by the federal government as non-hazardous waste and are safe for disposal in the normal municipal waste stream. Exceptions: California requires non-households to dispose of these batteries in accordance with the California Universal Waste Rules; Minnesota (Hennipen County only) requires consumers and non-consumers to dispose of these batteries as a hazardous waste. Transportation Panasonic Alkaline batteries are considered to be “dry cell” batteries and are unregulated for purposes of transportation by the U.S. Department of Transportation (DOT), International Civil Aviation Administration (ICAO), International Air Transport Association (IATA) and the International Maritime Organization (IMO). The only requirements for shipping these batteries by DOT is Special Provision 130 which states: “Batteries, dry are not subject to the requirements of this subchapter only when they are offered for transportation in a manner that prevents the dangerous evolution of heat (for example, by the effective insulation of exposed terminals). The only requirements for shipping these batteries by ICAO and IATA is Special Provision A123 which states: “An electrical battery or battery powered device having the potential of dangerous evolutions of heat that is not prepared so as to prevent a short-circuit (e.g. in the case of batteries, by the effective insulation of exposed terminals; or in the case of equipment, by disconnection of the battery and protection of exposed terminals) is forbidden from transportation.” For additional information on the transportation and disposal of batteries, please contact your local Panasonic Battery Sales Group sales office or visit our website at: www.panasonic.com/batteries ⇒ ⇒ ⇒ OEM Section ⇒ ⇒ INDUSTRIAL ALKALINE BATTERIES PAGE 3 AUGUST 2003 AM-1PI AM-2PI AM-3PI AM-4PI INDUSTRIAL ALKALINE BATTERIES: BATTERY SELECTOR GUIDE Typical Discharge Characteristics with Constant Current at 68°F (20°C) 10000 Cutoff Voltage: 0.9V 5000 1000 500 100 50 10 5 1 1 5 10 50 100 500 1000 Load Current (mA) INDUSTRIAL ALKALINE BATTERIES PAGE 4 AUGUST 2003 INDUSTRIAL ALKALINE BATTERIES: SPECIFICATIONS Typical Discharge Characteristics with Constant Resistance at 68°F (20°C) 10000 Cutoff Voltage: 0.9V 5000 1000 500 100 50 10 5 1 1 5 10 50 100 500 1000 Load Resistance (ohms) Typical Shelf Life at 68°F (20°C) 100 (LR20~6LR61) (AM1-PI~6AM-PI) 80 ~ ~ 0 0 12 3 Interval (years) INDUSTRIAL ALKALINE BATTERIES PAGE 5 AUGUST 2003 AM-3PI AM-4PI AM-2PI AM-1PI Duration (hrs.) Capacity Index (%) INDUSTRIAL ALKALINE BATTERIES: INDIVIDUAL DATASHEET Typical Discharge Characteristics With Constant Resistance At 68˚F (20˚C) AM-1PI(Size“D”) 1000 500 1. Type: AM1 (ANSI: 13A IEC: LR20) 2. Nominal Voltage: 1.5 volts 3. Average Weight: 141 grams Note: For +0 +0 1.312 (33.3 ) -0.236 -0.6 FT (Flat Top) product the total 100 +0 +0 0.374 (9.5 ) -0.067 -1.7 height is reduced by 1.5 mm. 50 + 10 0.9V 5 1.0V 1.1V 1 1.2V 0.5 _ _ 0.5 1 5 10 50 100 Load (Ohms) 0.295max (7.5max) 0.709min (18.0min) Unit: inch (mm) Typical Discharge Characteristics With Typical Temperature Characteristics With Constant Current At 68˚F (20˚C) 0.9 Volts Cutoff Voltage 1000 1000 500 500 100 100 50 50 113˚F (45˚C) 10 10 5 5 68˚F (20˚C) 0.9V 32˚F (0˚C) 1 1 1.0V 0.5 0.5 1.1V 1.2V 0.5 1 5 10 50 100 50 100 500 1000 5000 Load (Milliamperes) Load (Ohms) INDUSTRIAL ALKALINE BATTERIES PAGE 6 AUGUST 2003 Service Life (Hours) 0.59min 0.039max (1.0max) (1.5min) 2.407max (61.10max) 2.376min (60.30min) Service Life (Hours) Service Life (Hours) INDUSTRIAL ALKALINE BATTERIES: INDIVIDUAL DATASHEET Typical Discharge Characteristics With AM-2PI(Size“C”) Constant Resistance At 68˚F (20˚C) 1000 1. Type: AM2 (ANSI: 14A IEC: LR14) 500 2. Nominal Voltage: 1.5 volts 3. Average Weight: 70 grams Note: For +0 +0 (25.5 ) 1.004 -0.236 -0.6 FT (Flat Top) product the total +0 +0 100 0.295 (7.5 ) -0.079 -2 height is reduced by 1.5 mm. 50 + 10 5 0.9V 1.0V 1 1.1V 0.5 1.2V _ _ 0.5 1 5 10 50 100 Load (Ohms) 0.197max (5.0max) 0.512min (13min) Unit: inch (mm) Typical Discharge Characteristics With Typical Temperature Characteristics With Constant Current At 68˚F (20˚C) 0.9 Volts Cutoff Voltage 1000 1000 500 500 100 100 50 50 10 10 5 5 45˚C 20˚C 1 1 0.9V 0˚C 1.0V 0.5 0.5 1.2V -10˚C 1.1V 0.5 1 5 10 50 100 50 100 500 1000 5000 Load (Milliamperes) Load (Ohms) INDUSTRIAL ALKALINE BATTERIES PAGE 7 AUGUST 2003 Service Life (Hours) 0.59min 0.002max (0.05max) (1.5min) 1.969max (50.0max) 1.909min (48.5min) Service Life (Hours) Service Life (Hours) INDUSTRIAL ALKALINE BATTERIES: INDIVIDUAL DATASHEET Typical Discharge Characteristics With AM-3PI(Size“AA”) Constant Resistance At 68˚F (20˚C) 500 1. Type: AM3 (ANSI: 15A IEC: LR06) 2. Nominal Voltage: 1.5 volts 3. Average Weight: 24 grams 100 +0 +0 0.571 (14.5 ) -0.039 -1 +0 +0 50 0.217 (5.5 ) -0.051 -1.3 + 10 5 1 0.9V 0.5 1.1V 1.2V 1.0V _ .5 1 5 10 50 100 Load (Ohms) Unit: inch (mm) Typical Discharge Characteristics With Typical Temperature Characteristics With Constant Current At 68˚F (20˚C) 0.9 Volts Cutoff Voltage 500 500 0.9V 45˚C 1.0V 20˚C 1.1V 0˚C 1.2V -10˚C 100 100 50 50 10 10 5 5 1 1 0.5 0.5 51 10 50 100 500K 51 10 50 100 500K Load (Milliamperes) Load (Ohms) INDUSTRIAL ALKALINE BATTERIES PAGE 8 AUGUST 2003 Service Life (Hours) 0.39min (1.0min) 1.929min (49.0min) 1.988max (50.5max) Service Life (Hours) Service Life (Hours) INDUSTRIAL ALKALINE BATTERIES: INDIVIDUAL DATASHEET Typical Discharge Characteristics With AM-4PI(Size “AAA”) Constant Resistance At 68˚F (20˚C) 500 0.9V 1. Type: AM4 (ANSI: L24A IEC: LR03) 1.0V 1.1V 2. Nominal Voltage: 1.5 volts 1.2V 3. Average Weight: 12 grams +0 +0 100 0.413 (10.49 ) -0.039 -1 +0 +0 0.150 (3.8 ) 50 -0.071 -1.8 + 10 5 1 0.5 _ .5 1 5 10 50 100 Load (Ohms) Unit: inch (mm) Typical Discharge Characteristics With Typical Temperature Characteristics With Constant Current At 68˚F (10˚C) 0.9 Volts Cutoff Voltage 500 500 100 100 50 50 10 10 45˚C 20˚C 5 5 0˚C -10˚C 0.9V 1 1 1.0V 0.5 0.5 1.1V 1.2V 51 10 50 100 500K 51 10 50 100 500K Load (Milliamperes) Load (Ohms) INDUSTRIAL ALKALINE BATTERIES PAGE 9 AUGUST 2003 Service Life (Hours) 0.31min (0.8min) 1.752max (44.5max) 1.673min (42.5min) Service Life (Hours) Service Life (Hours) INDUSTRIAL ALKALINE BATTERIES: INDIVIDUAL DATASHEET Typical Discharge Characteristics With 6AM6-PI(9V) Constant Resistance At 68˚F (20˚C) 1000 1. Type: 6AM6 (ANSI: 1604A IEC: 6LR61) 2. Nominal Voltage: 9 volts 500 3. Average Weight: 45 grams 100 50 0.504±0.012 (12.8±0.3) 5.4V +0 +0 (26.49 ) 1.043 -0.079 -2.0 6.0V 10 5 _ + 6.6V 7.2V 1 0.5 50 100 500 1000 5K 10K Load (Ohms) Unit: inch (mm) Typical Discharge Characteristics With Typical Temperature Characteristics With 0.9 Volts Cutoff Voltage Constant Current At 68˚F (20˚C) 1000 500 500 100 100 50 50 10 10 5 45˚C 5.4V 6.0V 20˚C 5 6.6V 0˚C -10˚C 7.2V 1 1 0.5 0.5 51 10 50 100 500K 50 100 500 1000 5K 10K Load (Milliamperes) Load (Ohms) INDUSTRIAL ALKALINE BATTERIES PAGE 10 AUGUST 2003 +0 0.689 -0.079 +0 (17.5 ) -2.0 Service Life (Hours) 1.831min (46.5min) +0 +0 1.909max (48.49max ) -0.079 -2.0 Service Life (Hours) Service Life (Hours)