Ambient Humidity

35 to 85 % RH, Storage: 35 to 85 % RH

Ambient illuminance

Incandescent light: 3,000 lx at the light-receiving face

Ambient Temperature

-10 to +55 °C +14 to -131 °F (If 4 to 7 units are connected in cascade: -10 to +50 °C +14 to +122 °F, if 8 to 16 units are connected in cascade: -10 to +45 °C +14 to +113 °F) (No dew condensation or icing allowed), Storage: -20 to +70 °C - 4 to +158 °F

Automatic interference prevention function

Incorporated (Up to four sets of fiber heads can be mounted close together. However, H-SP mode is 2 fiber heads.) (Note 4)

Cable Length

Total length up to 100 m 328.084 ft (50 m 164.042 ft for 5 to 8 units, 20 m 65.617 ft for 9 to 16 units) is possible with 0.3 mm2, or more, cable.

Connecting method

Connector (Note 7)

Digital display

4 digit red LED display

Emitting element (modulated)

Blue LED

Fine sensitivity adjustment function

Incorporated

Insulation resistance

20 MO, or more, with 250 V DC megger between all supply terminals connected together and enclosure (Note 6)

Light emitting amount selection function

Incorporated (Red LED type only) (Note 3)

Material

Enclosure: Heat-resistant ABS, Case cover: Polycarbonate, MODE key: Acrylic, Jog switch: Heat-resistant ABS (FX-301B/G/H: Acrylic)

MODE indicator

RUN: Green LED, TEACH · ADJ · L/D ON · TIMER · PRO: Yellow LED

Operation indicator

Orange LED (lights up when the output is ON)

Output

NPN open-collector transistor·Maximum sink current:100 mA (50 mA, if five, or more, amplifiers are connected in cascade.)·Applied voltage: 30 V DC or less (between output and 0 V)·Residual voltage: 1.5 V or less [at 100 mA (at 50 mA, if five, or more, amplifiers are connected in cascade) sink current.] PNP open-collector transistor·Maximum source current: 100 mA (50 mA, if five, or more, amplifiers are connected in cascade.)·Applied voltage: 30 V DC or less (between output and +V)·Residual voltage: 1.5 V or less [at 100 mA (at 50 mA, if five, or more, amplifiers are connected in cascade) source current.]

Output operation

Selectable either Light-ON or Dark-ON, with jog switch

Peak emission wavelength

470 nm 0.019 mi

Power Consumption

Normal operation: 960 mW or less (Current consumption 40 mA or less at 24 V supply voltage) ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage)

Response Time

65 µs or less [H-SP (Red LED type only)], 150 µs or less (FAST),

Sensitivity setting

2-level teaching / Limit teaching / Manual adjustment /

Shock Resistance

98 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each

Short-Circuit Protection

Incorporated

Stability indicator

Green LED (lights up under stable light received condition or stable dark condition)

Supply Voltage

12 to 24 V DC ± 10 % Ripple P-P 10 % or less

Timer function

Incorporated with variable ON-delay / OFF-delay / ONE SHOT timer, switchable either effective or ineffective.[Timer period: Red LED type; 0.5 ms approx., 1 to 9999 ms (Blue LED, Green LED, Infrared LED type; approx. 0.5 to 500 ms)]

Vibration Resistance

10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each

Voltage withstandability

1,000 V AC for one min. between all supply terminals connected together and enclosure (Note 6)