OMRON G6K-2F-RF-DC9

HighFrequencyRelay G6K--RF Compact High Frequency Relays with 2 Form C (DPDT) Contacts H Handles 1 A, 30 VDC discrete load and 1 W at 1 GHz high frequency load. H Single-coil latching models available. H Gullwing surface mount terminals. H Ambient temperature range: --40° to 70°C. H Low coil power consumption: 100 mW. H Ideal for instrumentation and high-speed LAN network equipment. H RoHS Compliant. Ordering Information Contact form Max. load Coil voltage Non-latching partnumber Single-coillatchingpartnumber DPDT 1 A at 30 VDC,, 3VDC G6K-2F-RFDC3 G6KU-2F-RFDC3 ((2 2 F Form C) C) 0 0.3 3 A A at 125 125 V VA AC C 4.5 VDC G6K-2F-RFDC4.5 G6KU-2F-RFDC4.5 5VDC G6K-2F-RFDC5 G6KU-2F-RFDC5 6VDC G6K-2F-RFDC6 G6KU-2F-RFDC6 9VDC G6K-2F-RFDC9 G6KU-2F-RFDC9 12 VDC G6K-2F-RFDC12 G6KU-2F-RFDC12 24 VDC G6K-2F-RFDC24 G6KU-2F-RFDC24 Specifications J CONTACTDATA Contact form DPDT (2 Form C) Contact material Au alloy on Ag base Contact resistance 100 mΩ max. Contact rating g High frequency 1 GHz, 1 W (See note) Resistive load 0.3A, 125 VAC; 1A, 30VDC Operate (set) time 3ms max. Release (reset) time 3ms max. Max. switching voltage 60 VDC, 125 VAC Max. switching current 1A Max. switching capacity 37.5 VA (AC); 30 W (DC) Note: This value is for a load with V.S.W.R.≤1.2 586 High Frequency RelayG6K--RF J COILDATA Rated voltage Rated current Coil resistance Must operate Must release Rated power Maximum voltage voltage voltage consumption 3VDC 33.0 mA 91Ω 80% max. of 10% min. of Approx pp . 100 mW 150% of rated rated d volltage rated d volltage volltage 4.5 VDC 23.2 mA 194Ω 5VDC 21.1 mA 237Ω 6VDC 17.6 mA 341Ω 9VDC 11.3 mA 795Ω 12 VDC 9.1 mA 1315Ω 24 VDC 4.6 mA 5220Ω Note: 1. Thevalueoftheabovelistismeasuredatambienttemeprature23°Cwiththetoleranceofratedcurrentandcoilresistance±10%. 2. Themaximum voltageis thehighest voltagethat canbeapliedontherelay coil andit is onthe ambient temperature underthe operating conditions. 3. Other items are measured at 23°C. J HIGHFREQUENCYCHARACTERISTICS Isolation 20 dB min. at 1 GHz between continuous contact 30 dB min. at 1 GHz between non-continuous contact Insertion loss 0.2 dB max. at 1 GHz V.S.W.R. return loss 1.2 max. at 1 GHz Maximum transmission capacity 3W Maximum switching capacity 1W Note: Measured with 50Ωand V.S.W.R.≤1.2 J CHARACTERISTICS Between open contacts 750 VAC, 50/60 Hz for 1 minute Dielectric strengt g h Between contact sets 750 VAC, 50/60 Hz for 1 minute Between contacts and coil 750 VAC, 50/60 Hz for 1 minute Contacts and ground 500 VAC, 50/60 Hz for 1 minute Insulation resistance 1000 MΩ min. at 500 VDC Operation (set) time At 20°C 3ms max. Release (reset) time At 20°C 3ms max. 2 Shock resistance Malfunction 750 m/s (approx. 75G) 2 Destruction 1000 m/s (approx. 100G) Vibration resistance Malfunction 0.01 ms min., 10 Hz to 55 Hz (3.3 mm double amplitude) Destruction 2 hours, 55 Hz to 500 Hz (5 mm double amplitude) Mechanical life expectancy 50 million operations min. Electrical life expectancy Resistive load 100,000 operations min. (0.3 A, 125 VAC or 1 A, 30 VDC) Ambient temperature --40° to 70°Cwithnoicing Ambient humidity 5% to 85% RH Weight Approx. 0.95 g 587 High Frequency RelayG6K--RF Dimensions Unit: mm (inch) J RELAYS Terminalarrangement/ Mountingpads G6K-2F-RF Internalconnections (topview) 6.9 12.8 (0.504) (topview) (0.272) 10.3 7.6 Orientation 5.4 1.8 0.3 5.4 0.6 mark 3.2 (0.212) 0.5 Lot No. 0.5 7 7.8 2.5 1.35 3.2 2.5 5.4 0.8 1.35 7.6 Note: 1. Mounting pads tolerance:±0.1 mm 1.95 11.5 2. Tolerance for other parts:±0.3 mm 3. Coplanarity: Max. 0.15 Terminalarrangement/ G6KU-2F-RF Mountingpads Internalconnections (topview) 6.9 12.8 (0.504) (topview) (0.272) 10.3 7.6 5.4 1.8 0.3 Orientation -- + 0.6 5.4 3.2 mark (0.212) +-- 0.5 0.5 Lot No. 7 7.8 2.5 1.35 3.2 2.5 5.4 0.8 1.35 7.6 Note: 1. Mounting pads tolerance:±0.1 mm 1.95 11.5 2. Tolerance for other parts:±0.3 mm 3. Coplanarity: Max. 0.15 Precautions Coating J SOLDERINGCONDITIONS The relay mounted onthe PCB may becoated orwashed, but do Do not unpack the relay until ready to mount it. not apply silicone coating or detergent containing silicone, other wise, thesiliconecoatingordetergent may remainonthesurface Solder type: JIS Z3282, H63A or equivalent of the relay. The temperature profile for infrared reflow soldering (IRS) was measured on the surface of the PCB. The recommended thickness of solder paste is from 150µmto 200µm. Soldering 220°--245° 180°--200° Preheating 150° 90--120 20--30 Time (seconds) 588 High Frequency RelayG6K--RF Temperature°C J MOUNTING J OPERATING,STORAGEENVIRONMENT 1. Useinlocationswheretherelayisnotexposedtocorrosive PCBMounting gas such as hydrogen sulfide gas or salty air. If two or more relays are closely mounted with the long sides of 2. Use in locations where no visible dust exists. the relays facing each other and the soldering is performed with 3. Use in locations where the product is not exposed to direct infrared radiation, the solder may not be properly exposed to the sunlight, rain or snow. infrared rays. Be sure to keep the proper distance between adjacent relays as shown below to insure formation of good 4. Do not apply force to the product which may result in solder joints. deformation or change in quality of the product. 5. The relay is sealed to withstand 90°C for 1 minute in fluorocarbon liquid. If the relay is stored for a long time in an adverse environment with high temperature, high humidity, organic or sulfide gases, sulfide or oxide films will form on the contact surfaces. These filmsmayresultinunstablecontact,contactproblems,orfunction problems. Therefore, operate, store or transport the product under specified environmental conditions. Two or more relays may be mounted as closely as desired with the short sides of the relays facing each other. J MAXIMUMALLOWABLEVOLTAGE ClawSecuringForceDuringAutomaticMounting During automatic insertion of relays, make sure to set the The maximum allowable voltage of the coil can be obtained from the coil temperature increase and the heat--resisting temperature securing force of each claw to the following so that the relay’s characteristics will be maintained. of coil insulating sheath material. (Exceeding the heat-resisting temperature may result in burning or short-circuiting.) The maximum allowable voltage also involves important restrictions which include the following: • Must not cause thermal changes in or deterioration of the insulating material. • Must not cause damage to other control devices. • Must not cause any harmful effect on people. • Must not cause fire. Therefore, be sure to use the maximum allowable voltage as LatchingRelayMounting specified in the catalog. Makesurethatthevibrationorshockthat isgeneratedfromother As a rule, the rated voltage must be applied to the coil. A voltage devices, such as relays in operation, on the same panel and exceeding the rated value, however can be applied to the coil imposed on the latching relay does not exceed the rated value, provided that the voltage is less than or equal to the maximum otherwise the latching relay that has been set may be reset or allowable voltage. It must be noted that continuous voltage vice versa. The latching relay is reset before shipping. If application to the coil will cause a coil temperature increase excessive vibration or shock is imposed, however, the latching which may affect characteristics such as electrical life and coil relay may be set accidentally. Be sure to apply a reset signal insulation. before use. 589 High Frequency RelayG6K--RF Terms and Conditions of Sale 1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed 12. Warranties. (a) Exclusive Warranty. Seller's exclusive warranty is that the part of all quotations, acknowledgments, invoices, purchase orders and other Products will be free from defects in materials and workmanship for a period of documents, whether electronic or in writing, relating to the sale of products or twelve months from the date of sale by Seller (or such other period expressed services (collectively, the "Products") by Omron Electronic Components LLC in writing by Seller). Seller disclaims all other warranties, express or implied. ("Seller"). Seller hereby objects to any terms or conditions proposed in (b) Limitations. SELLER MAKES NO WARRANTY OR REPRESENTATION, Buyer's purchase order or other documents which are inconsistent with, or in EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL- addition to, these Terms. ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. 2. Prices; Payment. All prices stated are current, subject to change without BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE notice by Seller. Buyer agrees to pay the price in effect at time of shipment. PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR Payments for Products received are due net 30 days unless otherwise stated INTENDED USE. Seller further disclaims all warranties and responsibility of in the invoice. any type for claims or expenses based on infringement by the Products or oth- 3. Discounts. Cash discounts, if any, will apply only on the net amount of erwise of any intellectual property right. (c) Buyer Remedy. Seller's sole obli- invoices sent to Buyer after deducting transportation charges, taxes and gation hereunder shall be to replace (in the form originally shipped with Buyer duties, and will be allowed only if (i) the invoice is paid according to Seller's responsible for labor charges for removal or replacement thereof) the non- payment terms and (ii) Buyer has no past due amounts owing to Seller. complying Product or, at Seller's election, to repay or credit Buyer an amount 4. Currencies. If the prices quoted herein are in a currency other than U.S. dol- equal to the purchase price of the Product; provided that in no event shall lars, Buyer shall make remittance to Seller at the then current exchange rate Seller be responsible for warranty, repair, indemnity or any other claims or most favorable to Seller and which is available on the due date; provided that if expenses regarding the Products unless Seller's analysis confirms that the remittance is not made when due, Buyer will convert the amount to U.S. dol- Products were properly handled, stored, installed and maintained and not sub- lars at the then current exchange rate most favorable to Seller available during ject to contamination, abuse, misuse or inappropriate modification. Return of the period between the due date and the date remittance is actually made. any Products by Buyer must be approved in writing by Seller before shipment. 5. Governmental Approvals. Buyer shall be responsible for, and shall bear all Seller shall not be liable for the suitability or unsuitability or the results from the costs involved in, obtaining any government approvals required for the impor- use of Products in combination with any electrical or electronic components, tation or sale of the Products. circuits, system assemblies, or any other materials or substances or environ- 6. Taxes. All taxes, duties and other governmental charges (other than general ments. Any advice, recommendations or information given orally or in writing real property and income taxes), including any interest or penalties thereon, are not to be construed as an amendment or addition to the above warranty. imposed directly or indirectly on Seller or required to be collected directly or 13. Limitation on Liability; Etc. SELLER SHALL NOT BE LIABLE FOR SPECIAL, indirectly by Seller for the manufacture, production, sale, delivery, importation, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF consumption or use of the Products sold hereunder (including customs duties PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CON- and sales, excise, use, turnover and license taxes) shall be charged to and NECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN remitted by Buyer to Seller. CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in 7. Financial. If the financial position of Buyer at any time becomes unsatisfactory no event shall liability of Seller exceed the individual price of the Product on to Seller, Seller reserves the right to stop shipments or require satisfactory which liability is asserted. security or payment in advance. If Buyer fails to make payment or otherwise 14. Indemnities. Buyer shall indemnify and hold harmless Seller, its affiliates and comply with these Terms or any related agreement, Seller may (without liability its employees from and against all liabilities, losses, claims, costs and and in addition to other remedies) cancel any unshipped portion of Products expenses (including attorney's fees and expenses) related to any claim, inves- sold hereunder and stop any Products in transit until Buyer pays all amounts, tigation, litigation or proceeding (whether or not Seller is a party) which arises including amounts payable hereunder, whether or not then due, which are or is alleged to arise from Buyer's acts or omissions under these Terms or in owing to it by Buyer. Buyer shall in any event remain liable for all unpaid any way with respect to the Products. Without limiting the foregoing, Buyer (at accounts. its own expense) shall indemnify and hold harmless Seller and defend or settle 8. Cancellation; Etc. Orders are not subject to rescheduling or cancellation any action brought against Seller to the extent that it is based on a claim that unless Buyer indemnifies Seller fully against all costs or expenses arising in any Product made to Buyer specifications infringed intellectual property rights connection therewith. of another party. 9. Force Majeure. Seller shall not be liable for any delay or failure in delivery 15. Property; Confidentiality. The intellectual property embodied in the Products is resulting from causes beyond its control, including earthquakes, fires, floods, the exclusive property of Seller and its affiliates and Buyer shall not attempt to strikes or other labor disputes, shortage of labor or materials, accidents to duplicate it in any way without the written permission of Seller. Notwithstand- machinery, acts of sabotage, riots, delay in or lack of transportation or the ing any charges to Buyer for engineering or tooling, all engineering and tooling requirements of any government authority. shall remain the exclusive property of Seller. All information and materials sup- 10. Shipping; Delivery. Unless otherwise expressly agreed in writing by Seller: plied by Seller to Buyer relating to the Products are confidential and propri- 1. Shipments shall be by a carrier selected by Seller; etary, and Buyer shall limit distribution thereof to its trusted employees and 2. Such carrier shall act as the agent of Buyer and delivery to such carrier strictly prevent disclosure to any third party. shall constitute delivery to Buyer; 16. Miscellaneous. (a) Waiver. No failure or delay by Seller in exercising any right 3. All sales and shipments of Products shall be FOB shipping point (unless and no course of dealing between Buyer and Seller shall operate as a waiver otherwise stated in writing by Seller), at which point title to and all risk of of rights by Seller. (b) Assignment. Buyer may not assign its rights hereunder loss of the Products shall pass from Seller to Buyer, provided that Seller without Seller's written consent. (c) Law. These Terms are governed by Illi- shall retain a security interest in the Products until the full purchase price is nois law (without regard to conflict of law principles). Federal and state courts paid by Buyer; in Illinois shall have exclusive jurisdiction for any dispute hereunder. 4. Delivery and shipping dates are estimates only. (d) Amendment. These Terms constitute the entire agreement between Buyer 5. Seller will package Products as it deems proper for protection against and Seller relating to the Products, and no provision may be changed or normal handling and extra charges apply to special conditions. waived unless in writing signed by the parties. (e) Severability. If any provision 11. Claims. Any claim by Buyer against Seller for shortage or damage to the hereof is rendered ineffective or invalid, such provision shall not invalidate any Products occurring before delivery to the carrier must be presented in writing other provision. (f) Setoff. Buyer shall have no right to set off any amounts to Seller within 30 days of receipt of shipment and include the original trans- against the amount owing in respect of this invoice.. (g) Definitions. As used portation bill signed by the carrier noting that the carrier received the Products herein, "including" means "including without limitation". from Seller in the condition claimed. Certain Precautions on Specifications and Use 1. Suitability for Use. Seller shall not be responsible for conformity with any stan- 2. Programmable Products. Seller shall not be responsible for the user's dards, codes or regulations which apply to the combination of the Product in programming of a programmable product, or any consequence thereof. Buyer's application or use of the Product. At Buyer's request, Seller will pro- 3. Performance Data. Performance data given in this publication is provided as a vide applicable third party certification documents identifying ratings and limita- guide for the user in determining suitability and does not constitute a warranty. tions of use which apply to the Product. This information by itself is not It may represent the result of Seller's test conditions, and the users must corre- sufficient for a complete determination of the suitability of the Product in combi- late it to actual application requirements. Actual performance is subject to nation with the end product, machine, system, or other application or use. Seller's Warranty and Limitations of Liability. Buyer shall be solely responsible for determining appropriateness of the partic- 4. Change in Specifications. Product specifications and accessories may be ular Product with respect to Buyer's application, product or system. Buyer changed at any time based on improvements and other reasons. It is our prac- shall take application responsibility in all cases but the following is a non- tice to change part numbers when published ratings or features are changed, exhaustive list of applications for which particular attention must be given: or when significant construction changes are made. However, some specifica- (i) Outdoor use, uses involving potential chemical contamination or electrical tions of the Product may be changed without any notice. When in doubt, spe- interference, or conditions or uses not described in this document. cial part numbers may be assigned to fix or establish key specifications for your (ii) Energy control systems, combustion systems, railroad systems, aviation application. Please consult with your Seller representative at any time to con- systems, medical equipment, amusement machines, vehicles, safety firm actual specifications of purchased Product. equipment, and installations subject to 5. Errors and Omissions. The information in this publication has been carefully separate industry or government regulations. checked and is believed to be accurate; however, no responsibility is assumed (iii)Use in consumer products or any use in significant quantities. for clerical, typographical or proofreading errors, or omissions. (iv)Systems, machines and equipment that could present a risk to life or 6. RoHS Compliance. Where indicated, our products currently comply, to the best property. Please know and observe all prohibitions of use applicable to this of our knowledge as of the date of this publication, with the requirements of the product. European Union's Directive on the Restriction of certain Hazardous Sub- NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS stances ("RoHS"), although the requirements of RoHS do not take effect until RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM July 2006. These requirements may be subject to change. Please consult our AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT website for current information. THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website at www.components.omron.com – under the “About Us” tab, in the Legal Matters section. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ELECTRONIC OMRON CANADA, INC. OMRON ON-LINE COMPONENTS LLC 885 Milner Avenue Global - http://www.omron.com 55 E. Commerce Drive, Suite B Toronto, Ontario M1B 5V8 USA - http://www.components.omron.com Schaumburg, IL 60173 Canada - http://www.omron.ca 416-286-6465 847-882-2288 Cat. No. JB301-E3-01 3/05 Specifications subject to change without notice Printed in USA